| Message ID | 1357806863-6899-2-git-send-email-shawn.guo@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 10 January 2013 14:04, Shawn Guo <shawn.guo@linaro.org> wrote: > Add an imx6q-cpufreq for Freescale i.MX6Q SoC to handle the hardware ^ driver > specific frequency and voltage scaling requirements. > > The driver supports module build and is instantiated by the platform > device/driver mechanism, so that it will be instantiated on other > platform, as IMX is built with multiplatform support. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > --- > drivers/cpufreq/Kconfig.arm | 9 ++ > drivers/cpufreq/Makefile | 1 + > drivers/cpufreq/imx6q-cpufreq.c | 296 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 306 insertions(+) > create mode 100644 drivers/cpufreq/imx6q-cpufreq.c > > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm > index a0b3661..9e628ba 100644 > --- a/drivers/cpufreq/Kconfig.arm > +++ b/drivers/cpufreq/Kconfig.arm > @@ -77,6 +77,15 @@ config ARM_EXYNOS5250_CPUFREQ > This adds the CPUFreq driver for Samsung EXYNOS5250 > SoC. > > +config ARM_IMX6Q_CPUFREQ > + tristate "Freescale i.MX6Q cpufreq support" > + depends on SOC_IMX6Q > + depends on REGULATOR_ANATOP > + help > + This adds cpufreq driver support for Freescale i.MX6Q SOC. > + > + If in doubt, say N. > + > config ARM_SPEAR_CPUFREQ > bool "SPEAr CPUFreq support" > depends on PLAT_SPEAR > diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile > index 1f254ec0..31699a0 100644 > --- a/drivers/cpufreq/Makefile > +++ b/drivers/cpufreq/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o > obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o > obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o > obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o > +obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o > obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o > obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o > > diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c > new file mode 100644 > index 0000000..218d8f1 > --- /dev/null > +++ b/drivers/cpufreq/imx6q-cpufreq.c > @@ -0,0 +1,296 @@ > +/* > + * Copyright (C) 2013 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/clk.h> > +#include <linux/cpu.h> > +#include <linux/cpufreq.h> > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/opp.h> > +#include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > +#include <linux/slab.h> > + > +#define PU_SOC_VOLTAGE_NORMAL 1250000 > +#define PU_SOC_VOLTAGE_HIGH 1275000 > +#define FREQ_1P2_GHZ 1200000000 > + > +static struct regulator *arm_reg; > +static struct regulator *pu_reg; > +static struct regulator *soc_reg; > + > +static struct clk *arm_clk; > +static struct clk *pll1_sys_clk; > +static struct clk *pll1_sw_clk; > +static struct clk *step_clk; > +static struct clk *pll2_pfd2_396m_clk; > + > +static struct device *cpu_dev; > +static struct cpufreq_frequency_table *freq_table; > +static unsigned int transition_latency; > + > +static int imx6q_verify_speed(struct cpufreq_policy *policy) > +{ > + return cpufreq_frequency_table_verify(policy, freq_table); > +} > + > +static unsigned int imx6q_get_speed(unsigned int cpu) > +{ > + return clk_get_rate(arm_clk) / 1000; > +} > + > +static int imx6q_set_target(struct cpufreq_policy *policy, > + unsigned int target_freq, unsigned int relation) > +{ > + struct cpufreq_freqs freqs; > + struct opp *opp; > + unsigned long freq_hz, volt, volt_old; > + unsigned int index, cpu; > + int ret; > + > + ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, > + relation, &index); @Rafael: Why is this function used in our target routines? Isn't the caller supposed to send a valid freq from freq_table? All governors do it. > + if (ret) { > + dev_err(cpu_dev, "failed to match target frequency %d: %d\n", > + target_freq, ret); > + return ret; > + } > + > + freqs.new = freq_table[index].frequency; > + freq_hz = freqs.new * 1000; > + freqs.old = clk_get_rate(arm_clk) / 1000; clk_get_rate() can fail. > + > + if (freqs.old == freqs.new) > + return 0; > + > + for_each_online_cpu(cpu) { > + freqs.cpu = cpu; > + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); > + } > + > + opp = opp_find_freq_ceil(cpu_dev, &freq_hz); > + if (IS_ERR(opp)) { > + dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); > + return PTR_ERR(opp); > + } > + > + volt = opp_get_voltage(opp); > + volt_old = regulator_get_voltage(arm_reg); > + > + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", > + freqs.old / 1000, volt_old / 1000, > + freqs.new / 1000, volt / 1000); > + > + /* scaling up? scale voltage before frequency */ > + if (freqs.new > freqs.old) { > + ret = regulator_set_voltage_tol(arm_reg, volt, 0); > + if (ret) { > + dev_err(cpu_dev, "failed to scale voltage up: %d\n", ret); > + return ret; > + } > + > + /* > + * Need to increase vddpu and vddsoc for safety > + * if we are about to run at 1.2 GHz. > + */ > + if (freqs.new == FREQ_1P2_GHZ / 1000) { > + regulator_set_voltage_tol(pu_reg, > + PU_SOC_VOLTAGE_HIGH, 0); > + regulator_set_voltage_tol(soc_reg, > + PU_SOC_VOLTAGE_HIGH, 0); > + } > + } > + > + /* > + * The setpoints are selected per PLL/PDF frequencies, so we need to > + * reprogram PLL for frequency scaling. The procedure of reprogramming > + * PLL1 is as below. > + * > + * - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it > + * - Disable pll1_sys_clk and reprogram it > + * - Enable pll1_sys_clk and reparent pll1_sw_clk back to it > + * - Disable pll2_pfd2_396m_clk > + */ > + clk_prepare_enable(pll2_pfd2_396m_clk); > + clk_set_parent(step_clk, pll2_pfd2_396m_clk); > + clk_set_parent(pll1_sw_clk, step_clk); > + clk_prepare_enable(pll1_sys_clk); all these fns can fail too.. don't want to check return values? > + if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { > + clk_disable_unprepare(pll1_sys_clk); > + clk_set_rate(pll1_sys_clk, freqs.new * 1000); > + clk_prepare_enable(pll1_sys_clk); > + clk_set_parent(pll1_sw_clk, pll1_sys_clk); > + clk_disable_unprepare(pll2_pfd2_396m_clk); > + } else { > + /* > + * Disable pll1_sys_clk if pll2_pfd2_396m_clk is sufficient > + * to provide the frequency. > + */ > + clk_disable_unprepare(pll1_sys_clk); > + } > + > + /* Ensure the arm clock divider is what we expect */ > + ret = clk_set_rate(arm_clk, freqs.new * 1000); > + if (ret) { > + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); > + regulator_set_voltage_tol(arm_reg, volt_old, 0); > + return ret; > + } > + > + /* scaling down? scale voltage after frequency */ > + if (freqs.new < freqs.old) { > + ret = regulator_set_voltage_tol(arm_reg, volt, 0); > + if (ret) > + dev_warn(cpu_dev, "failed to scale voltage down: %d\n", ret); > + > + if (freqs.old == FREQ_1P2_GHZ / 1000) { > + regulator_set_voltage_tol(pu_reg, > + PU_SOC_VOLTAGE_NORMAL, 0); > + regulator_set_voltage_tol(soc_reg, > + PU_SOC_VOLTAGE_NORMAL, 0); > + } > + } > + > + for_each_online_cpu(cpu) { > + freqs.cpu = cpu; > + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); > + } > + > + return 0; > +} > + > +static int imx6q_cpufreq_init(struct cpufreq_policy *policy) > +{ > + int ret; > + So you finally removed the ugly check :) Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jan 10, 2013 at 02:15:44PM +0530, Viresh Kumar wrote: ... > > + clk_prepare_enable(pll2_pfd2_396m_clk); > > + clk_set_parent(step_clk, pll2_pfd2_396m_clk); > > + clk_set_parent(pll1_sw_clk, step_clk); > > + clk_prepare_enable(pll1_sys_clk); > > all these fns can fail too.. don't want to check return values? > I initially had every single clk and regulator call return checked and error handled properly. But the code becomes very messy with the error messages and recovering logic all over the places. I think it's a bit over engineering, and made a compromise to only check limited ones to ensure the correctness at subsystem level. > > +static int imx6q_cpufreq_init(struct cpufreq_policy *policy) > > +{ > > + int ret; > > + > > So you finally removed the ugly check :) > I just found though it's less optimal, removing the check does not really cause any problem for me. > Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Thanks. Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index a0b3661..9e628ba 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -77,6 +77,15 @@ config ARM_EXYNOS5250_CPUFREQ This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. +config ARM_IMX6Q_CPUFREQ + tristate "Freescale i.MX6Q cpufreq support" + depends on SOC_IMX6Q + depends on REGULATOR_ANATOP + help + This adds cpufreq driver support for Freescale i.MX6Q SOC. + + If in doubt, say N. + config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 1f254ec0..31699a0 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o +obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c new file mode 100644 index 0000000..218d8f1 --- /dev/null +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define PU_SOC_VOLTAGE_NORMAL 1250000 +#define PU_SOC_VOLTAGE_HIGH 1275000 +#define FREQ_1P2_GHZ 1200000000 + +static struct regulator *arm_reg; +static struct regulator *pu_reg; +static struct regulator *soc_reg; + +static struct clk *arm_clk; +static struct clk *pll1_sys_clk; +static struct clk *pll1_sw_clk; +static struct clk *step_clk; +static struct clk *pll2_pfd2_396m_clk; + +static struct device *cpu_dev; +static struct cpufreq_frequency_table *freq_table; +static unsigned int transition_latency; + +static int imx6q_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, freq_table); +} + +static unsigned int imx6q_get_speed(unsigned int cpu) +{ + return clk_get_rate(arm_clk) / 1000; +} + +static int imx6q_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + struct opp *opp; + unsigned long freq_hz, volt, volt_old; + unsigned int index, cpu; + int ret; + + ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, + relation, &index); + if (ret) { + dev_err(cpu_dev, "failed to match target frequency %d: %d\n", + target_freq, ret); + return ret; + } + + freqs.new = freq_table[index].frequency; + freq_hz = freqs.new * 1000; + freqs.old = clk_get_rate(arm_clk) / 1000; + + if (freqs.old == freqs.new) + return 0; + + for_each_online_cpu(cpu) { + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + opp = opp_find_freq_ceil(cpu_dev, &freq_hz); + if (IS_ERR(opp)) { + dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); + return PTR_ERR(opp); + } + + volt = opp_get_voltage(opp); + volt_old = regulator_get_voltage(arm_reg); + + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + freqs.old / 1000, volt_old / 1000, + freqs.new / 1000, volt / 1000); + + /* scaling up? scale voltage before frequency */ + if (freqs.new > freqs.old) { + ret = regulator_set_voltage_tol(arm_reg, volt, 0); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage up: %d\n", ret); + return ret; + } + + /* + * Need to increase vddpu and vddsoc for safety + * if we are about to run at 1.2 GHz. + */ + if (freqs.new == FREQ_1P2_GHZ / 1000) { + regulator_set_voltage_tol(pu_reg, + PU_SOC_VOLTAGE_HIGH, 0); + regulator_set_voltage_tol(soc_reg, + PU_SOC_VOLTAGE_HIGH, 0); + } + } + + /* + * The setpoints are selected per PLL/PDF frequencies, so we need to + * reprogram PLL for frequency scaling. The procedure of reprogramming + * PLL1 is as below. + * + * - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it + * - Disable pll1_sys_clk and reprogram it + * - Enable pll1_sys_clk and reparent pll1_sw_clk back to it + * - Disable pll2_pfd2_396m_clk + */ + clk_prepare_enable(pll2_pfd2_396m_clk); + clk_set_parent(step_clk, pll2_pfd2_396m_clk); + clk_set_parent(pll1_sw_clk, step_clk); + clk_prepare_enable(pll1_sys_clk); + if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) { + clk_disable_unprepare(pll1_sys_clk); + clk_set_rate(pll1_sys_clk, freqs.new * 1000); + clk_prepare_enable(pll1_sys_clk); + clk_set_parent(pll1_sw_clk, pll1_sys_clk); + clk_disable_unprepare(pll2_pfd2_396m_clk); + } else { + /* + * Disable pll1_sys_clk if pll2_pfd2_396m_clk is sufficient + * to provide the frequency. + */ + clk_disable_unprepare(pll1_sys_clk); + } + + /* Ensure the arm clock divider is what we expect */ + ret = clk_set_rate(arm_clk, freqs.new * 1000); + if (ret) { + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); + regulator_set_voltage_tol(arm_reg, volt_old, 0); + return ret; + } + + /* scaling down? scale voltage after frequency */ + if (freqs.new < freqs.old) { + ret = regulator_set_voltage_tol(arm_reg, volt, 0); + if (ret) + dev_warn(cpu_dev, "failed to scale voltage down: %d\n", ret); + + if (freqs.old == FREQ_1P2_GHZ / 1000) { + regulator_set_voltage_tol(pu_reg, + PU_SOC_VOLTAGE_NORMAL, 0); + regulator_set_voltage_tol(soc_reg, + PU_SOC_VOLTAGE_NORMAL, 0); + } + } + + for_each_online_cpu(cpu) { + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + + return 0; +} + +static int imx6q_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret; + + ret = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "invalid frequency table: %d\n", ret); + return ret; + } + + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = clk_get_rate(arm_clk) / 1000; + policy->shared_type = CPUFREQ_SHARED_TYPE_ANY; + cpumask_setall(policy->cpus); + cpufreq_frequency_table_get_attr(freq_table, policy->cpu); + + return 0; +} + +static int imx6q_cpufreq_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *imx6q_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver imx6q_cpufreq_driver = { + .verify = imx6q_verify_speed, + .target = imx6q_set_target, + .get = imx6q_get_speed, + .init = imx6q_cpufreq_init, + .exit = imx6q_cpufreq_exit, + .name = "imx6q-cpufreq", + .attr = imx6q_cpufreq_attr, +}; + +static int imx6q_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + int ret; + + cpu_dev = &pdev->dev; + + np = of_find_node_by_path("/cpus/cpu@0"); + if (!np) { + dev_err(cpu_dev, "failed to find cpu0 node\n"); + return -ENOENT; + } + + cpu_dev->of_node = np; + + arm_clk = devm_clk_get(cpu_dev, "arm"); + pll1_sys_clk = devm_clk_get(cpu_dev, "pll1_sys"); + pll1_sw_clk = devm_clk_get(cpu_dev, "pll1_sw"); + step_clk = devm_clk_get(cpu_dev, "step"); + pll2_pfd2_396m_clk = devm_clk_get(cpu_dev, "pll2_pfd2_396m"); + if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) || + IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) { + dev_err(cpu_dev, "failed to get clocks\n"); + ret = -ENOENT; + goto put_node; + } + + arm_reg = devm_regulator_get(cpu_dev, "arm"); + pu_reg = devm_regulator_get(cpu_dev, "pu"); + soc_reg = devm_regulator_get(cpu_dev, "soc"); + if (!arm_reg || !pu_reg || !soc_reg) { + dev_err(cpu_dev, "failed to get regulators\n"); + ret = -ENOENT; + goto put_node; + } + + /* We expect an OPP table supplied by platform */ + ret = opp_get_opp_count(cpu_dev); + if (ret < 0) { + dev_err(cpu_dev, "no OPP table is found: %d\n", ret); + goto put_node; + } + + ret = opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto put_node; + } + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + ret = cpufreq_register_driver(&imx6q_cpufreq_driver); + if (ret) { + dev_err(cpu_dev, "failed register driver: %d\n", ret); + goto free_freq_table; + } + + of_node_put(np); + return 0; + +free_freq_table: + opp_free_cpufreq_table(cpu_dev, &freq_table); +put_node: + of_node_put(np); + return ret; +} + +static int imx6q_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&imx6q_cpufreq_driver); + opp_free_cpufreq_table(cpu_dev, &freq_table); + + return 0; +} + +static struct platform_driver imx6q_cpufreq_platdrv = { + .driver = { + .name = "imx6q-cpufreq", + .owner = THIS_MODULE, + }, + .probe = imx6q_cpufreq_probe, + .remove = imx6q_cpufreq_remove, +}; +module_platform_driver(imx6q_cpufreq_platdrv); + +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver"); +MODULE_LICENSE("GPL");
Add an imx6q-cpufreq for Freescale i.MX6Q SoC to handle the hardware specific frequency and voltage scaling requirements. The driver supports module build and is instantiated by the platform device/driver mechanism, so that it will be instantiated on other platform, as IMX is built with multiplatform support. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/cpufreq/Kconfig.arm | 9 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/imx6q-cpufreq.c | 296 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 306 insertions(+) create mode 100644 drivers/cpufreq/imx6q-cpufreq.c