From patchwork Fri Apr 5 04:21:48 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nishanth Menon X-Patchwork-Id: 2396541 Return-Path: X-Original-To: patchwork-linux-pm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork2.kernel.org (Postfix) with ESMTP id 9D5C6DF2E5 for ; Fri, 5 Apr 2013 04:22:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765545Ab3DEEWC (ORCPT ); Fri, 5 Apr 2013 00:22:02 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:57677 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751190Ab3DEEWB (ORCPT ); Fri, 5 Apr 2013 00:22:01 -0400 Received: from dlelxv30.itg.ti.com ([172.17.2.17]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id r354Ltsc002824; Thu, 4 Apr 2013 23:21:55 -0500 Received: from DFLE73.ent.ti.com (dfle73.ent.ti.com [128.247.5.110]) by dlelxv30.itg.ti.com (8.13.8/8.13.8) with ESMTP id r354Lsv2008564; Thu, 4 Apr 2013 23:21:55 -0500 Received: from dlelxv22.itg.ti.com (172.17.1.197) by DFLE73.ent.ti.com (128.247.5.110) with Microsoft SMTP Server id 14.2.342.3; Thu, 4 Apr 2013 23:21:54 -0500 Received: from localhost (kahuna.am.dhcp.ti.com [128.247.75.12]) by dlelxv22.itg.ti.com (8.13.8/8.13.8) with ESMTP id r354Lsvv008075; Thu, 4 Apr 2013 23:21:54 -0500 From: Nishanth Menon To: , , CC: Liam Girdwood , Mark Brown , "Rafael J. Wysocki" , Viresh Kumar , Shawn Guo , Nishanth Menon Subject: [PATCH 2/2] cpufreq: cpufreq-cpu0: defer probe when regulator is not ready Date: Thu, 4 Apr 2013 23:21:48 -0500 Message-ID: <1365135708-23886-3-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1365135708-23886-1-git-send-email-nm@ti.com> References: <1365135708-23886-1-git-send-email-nm@ti.com> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org regulator_get will now return -EPROBE_DEFER when the cpu0-supply node is present, but the regulator is not yet registered. It is possible for this to occur when the regulator registration by itself might be defered due to some dependent interface not yet instantiated. For example: an regulator which uses I2C and GPIO might need both systems available before proceeding, in this case, the regulator might defer it's registration. However, the cpufreq-cpu0 driver assumes that any un-successful return result is equivalent of failure. When the regulator_get returns failure other than -EPROBE_DEFER, it makes sense to assume that supply node is not present and proceed with the assumption that only clock control is necessary in the platform. With this change, we can now handle the following conditions: a) cpu0-supply binding is not present, regulator_get will return appropriate error result, resulting in cpufreq-cpu0 driver controlling just the clock. b) cpu0-supply binding is present, regulator_get returns -EPROBE_DEFER, we retry resulting in cpufreq-cpu0 driver registering later once the regulator is available. c) cpu0-supply binding is present, regulator_get returns -EPROBE_DEFER, however, regulator never registers, we retry until cpufreq-cpu0 driver fails to register pointing at device tree information bug. However, in this case, the fact that cpufreq-cpu0 operates with clock only when the DT binding clearly indicates need of a supply is a bug of it's own. d) cpu0-supply gets an regulator at probe - cpufreq-cpu0 driver controls both the clock and regulator Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: Shawn Guo Signed-off-by: Nishanth Menon --- drivers/cpufreq/cpufreq-cpu0.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 4e5b7fb..55fec7c 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -194,6 +194,20 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) cpu_dev = &pdev->dev; cpu_dev->of_node = np; + cpu_reg = devm_regulator_get(cpu_dev, "cpu0"); + if (IS_ERR(cpu_reg)) { + /* + * If cpu0 regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. + */ + if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + dev_err(cpu_dev, "cpu0 regulator not ready, retry\n"); + return -EPROBE_DEFER; + } + pr_err("failed to get cpu0 regulator: %ld\n", PTR_ERR(cpu_reg)); + cpu_reg = NULL; + } + cpu_clk = devm_clk_get(cpu_dev, NULL); if (IS_ERR(cpu_clk)) { ret = PTR_ERR(cpu_clk); @@ -201,12 +215,6 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_put_node; } - cpu_reg = devm_regulator_get(cpu_dev, "cpu0"); - if (IS_ERR(cpu_reg)) { - pr_warn("failed to get cpu0 regulator\n"); - cpu_reg = NULL; - } - ret = of_init_opp_table(cpu_dev); if (ret) { pr_err("failed to init OPP table: %d\n", ret);