| Message ID | 1367931671-3906-16-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On 07-05-2013 09:01, Amit Daniel Kachhap wrote: > This patch adds support to handle multiple instances of the TMU controllers. > This is done by removing the static structure to register with the core thermal > and creating it dynamically for each instance of the TMU controller. The > interrupt is made shared type to handle interrupts for all the TMU. Also > the identifier of the TMU controller is extracted from device tree alias. > > Acked-by: Kukjin Kim <kgene.kim@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > --- > drivers/thermal/samsung/exynos_tmu.c | 125 +++++++++++++++++++++++----------- > 1 files changed, 84 insertions(+), 41 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index bdf40ef..94d6e8e 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -29,6 +29,8 @@ > #include <linux/module.h> > #include <linux/mutex.h> > #include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > #include <linux/platform_device.h> > #include <linux/slab.h> > #include <linux/workqueue.h> > @@ -36,9 +38,24 @@ > #include "exynos_tmu.h" > #include "exynos_tmu_data.h" > > +/** > + * struct exynos_tmu_data : A structure to hold the private data of the TMU > + driver > + * @id: identifier of the one instance of the TMU controller. > + * @pdata: pointer to the tmu platform/configuration data > + * @base: base address of the single instance of the TMU controller. > + * @irq: irq number of the TMU controller. > + * @soc: id of the SOC type. > + * @irq_work: pointer to the irq work structure. > + * @lock: lock to implement synchronization. > + * @clk: pointer to the clock structure. > + * @temp_error1: fused value of the first point trim. > + * @temp_error2: fused value of the second point trim. > + * @reg_conf: pointer to structure to register with core thermal. > + */ > struct exynos_tmu_data { > + int id; > struct exynos_tmu_platform_data *pdata; > - struct resource *mem; > void __iomem *base; > int irq; > enum soc_type soc; > @@ -46,6 +63,7 @@ struct exynos_tmu_data { > struct mutex lock; > struct clk *clk; > u8 temp_error1, temp_error2; > + struct thermal_sensor_conf *reg_conf; > }; > > /* > @@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) > { return -EINVAL; } > #endif/*CONFIG_THERMAL_EMULATION*/ > > -static struct thermal_sensor_conf exynos_sensor_conf = { > - .name = "exynos-therm", > - .read_temperature = (int (*)(void *))exynos_tmu_read, > - .write_emul_temp = exynos_tmu_set_emulation, > -}; > - > static void exynos_tmu_work(struct work_struct *work) > { > struct exynos_tmu_data *data = container_of(work, > @@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work) > struct exynos_tmu_registers *reg = pdata->registers; > unsigned int val_irq; > > - exynos_report_trigger(&exynos_sensor_conf); > + exynos_report_trigger(data->reg_conf); > mutex_lock(&data->lock); > clk_enable(data->clk); > > @@ -405,10 +417,42 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data( > platform_get_device_id(pdev)->driver_data; > } > > +static int exynos_map_dt_data(struct platform_device *pdev) > +{ > + struct exynos_tmu_data *data = platform_get_drvdata(pdev); > + struct resource res; > + > + if (!data) > + return -ENODEV; > + > + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); > + if (data->id < 0) > + data->id = 0; > + > + data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); > + if (data->irq <= 0) { > + dev_err(&pdev->dev, "failed to get IRQ\n"); > + return -ENODEV; > + } > + > + if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { > + dev_err(&pdev->dev, "failed to get Resource\n"); > + return -ENODEV; > + } > + > + data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); > + if (!data->base) { > + dev_err(&pdev->dev, "Failed to ioremap memory\n"); > + return -ENOMEM; looks like the statement below fits better here: return ERR_PTR(-EADDRNOTAVAIL); > + } blank line? > + return 0; > +} > + > static int exynos_tmu_probe(struct platform_device *pdev) > { > struct exynos_tmu_data *data; > struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; > + struct thermal_sensor_conf *sensor_conf; > int ret, i; > > if (!pdata) > @@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev) > return -ENOMEM; > } > > - data->irq = platform_get_irq(pdev, 0); > - if (data->irq < 0) { > - dev_err(&pdev->dev, "Failed to get platform irq\n"); > - return data->irq; > - } > - > - INIT_WORK(&data->irq_work, exynos_tmu_work); > - > - data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - if (!data->mem) { > - dev_err(&pdev->dev, "Failed to get platform resource\n"); > - return -ENOENT; > - } > + data->pdata = pdata; > + platform_set_drvdata(pdev, data); > + mutex_init(&data->lock); > > - data->base = devm_ioremap_resource(&pdev->dev, data->mem); > - if (IS_ERR(data->base)) > - return PTR_ERR(data->base); > + ret = exynos_map_dt_data(pdev); > + if (ret) > + return ret; > > + INIT_WORK(&data->irq_work, exynos_tmu_work); > ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, > - IRQF_TRIGGER_RISING, "exynos-tmu", data); > + IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); > if (ret) { > dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); > return ret; > @@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) > goto err_clk; > } > > - data->pdata = pdata; > - platform_set_drvdata(pdev, data); > - mutex_init(&data->lock); > - > ret = exynos_tmu_initialize(pdev); > if (ret) { > dev_err(&pdev->dev, "Failed to initialize TMU\n"); > @@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev) > > exynos_tmu_control(pdev, true); > > - /* Register the sensor with thermal management interface */ > - (&exynos_sensor_conf)->driver_data = data; > - exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] + > + /* Allocate a structure to register with the exynos core thermal */ > + sensor_conf = devm_kzalloc(&pdev->dev, > + sizeof(struct thermal_sensor_conf), GFP_KERNEL); > + if (!sensor_conf) { > + dev_err(&pdev->dev, "Failed to allocate registration struct\n"); > + ret = -ENOMEM; > + goto err_clk; > + } > + data->reg_conf = sensor_conf; > + sprintf(sensor_conf->name, "therm_zone%d", data->id); > + sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; > + sensor_conf->write_emul_temp = > + (int (*)(void *, unsigned long))exynos_tmu_set_emulation; > + sensor_conf->driver_data = data; > + sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] + > pdata->trigger_enable[1] + pdata->trigger_enable[2]+ > pdata->trigger_enable[3]; > > - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) > - exynos_sensor_conf.trip_data.trip_val[i] = > + for (i = 0; i < sensor_conf->trip_data.trip_count; i++) > + sensor_conf->trip_data.trip_val[i] = > pdata->threshold + pdata->trigger_levels[i]; > > - exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling; > + sensor_conf->trip_data.trigger_falling = pdata->threshold_falling; > > - exynos_sensor_conf.cooling_data.freq_clip_count = > - pdata->freq_tab_count; > + sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count; > for (i = 0; i < pdata->freq_tab_count; i++) { > - exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max = > + sensor_conf->cooling_data.freq_data[i].freq_clip_max = > pdata->freq_tab[i].freq_clip_max; > - exynos_sensor_conf.cooling_data.freq_data[i].temp_level = > + sensor_conf->cooling_data.freq_data[i].temp_level = > pdata->freq_tab[i].temp_level; > } > > - ret = exynos_register_thermal(&exynos_sensor_conf); > + /* Register the sensor with thermal management interface */ > + ret = exynos_register_thermal(sensor_conf); > if (ret) { > dev_err(&pdev->dev, "Failed to register thermal interface\n"); > goto err_clk; > @@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) > > exynos_tmu_control(pdev, false); > > - exynos_unregister_thermal(&exynos_sensor_conf); > + exynos_unregister_thermal(data->reg_conf); > > clk_unprepare(data->clk); > >
On Thu, May 9, 2013 at 8:23 PM, Eduardo Valentin <eduardo.valentin@ti.com> wrote: > On 07-05-2013 09:01, Amit Daniel Kachhap wrote: >> This patch adds support to handle multiple instances of the TMU controllers. >> This is done by removing the static structure to register with the core thermal >> and creating it dynamically for each instance of the TMU controller. The >> interrupt is made shared type to handle interrupts for all the TMU. Also >> the identifier of the TMU controller is extracted from device tree alias. >> >> Acked-by: Kukjin Kim <kgene.kim@samsung.com> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> --- >> drivers/thermal/samsung/exynos_tmu.c | 125 +++++++++++++++++++++++----------- >> 1 files changed, 84 insertions(+), 41 deletions(-) >> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> index bdf40ef..94d6e8e 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -29,6 +29,8 @@ >> #include <linux/module.h> >> #include <linux/mutex.h> >> #include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/of_irq.h> >> #include <linux/platform_device.h> >> #include <linux/slab.h> >> #include <linux/workqueue.h> >> @@ -36,9 +38,24 @@ >> #include "exynos_tmu.h" >> #include "exynos_tmu_data.h" >> >> +/** >> + * struct exynos_tmu_data : A structure to hold the private data of the TMU >> + driver >> + * @id: identifier of the one instance of the TMU controller. >> + * @pdata: pointer to the tmu platform/configuration data >> + * @base: base address of the single instance of the TMU controller. >> + * @irq: irq number of the TMU controller. >> + * @soc: id of the SOC type. >> + * @irq_work: pointer to the irq work structure. >> + * @lock: lock to implement synchronization. >> + * @clk: pointer to the clock structure. >> + * @temp_error1: fused value of the first point trim. >> + * @temp_error2: fused value of the second point trim. >> + * @reg_conf: pointer to structure to register with core thermal. >> + */ >> struct exynos_tmu_data { >> + int id; >> struct exynos_tmu_platform_data *pdata; >> - struct resource *mem; >> void __iomem *base; >> int irq; >> enum soc_type soc; >> @@ -46,6 +63,7 @@ struct exynos_tmu_data { >> struct mutex lock; >> struct clk *clk; >> u8 temp_error1, temp_error2; >> + struct thermal_sensor_conf *reg_conf; >> }; >> >> /* >> @@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) >> { return -EINVAL; } >> #endif/*CONFIG_THERMAL_EMULATION*/ >> >> -static struct thermal_sensor_conf exynos_sensor_conf = { >> - .name = "exynos-therm", >> - .read_temperature = (int (*)(void *))exynos_tmu_read, >> - .write_emul_temp = exynos_tmu_set_emulation, >> -}; >> - >> static void exynos_tmu_work(struct work_struct *work) >> { >> struct exynos_tmu_data *data = container_of(work, >> @@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work) >> struct exynos_tmu_registers *reg = pdata->registers; >> unsigned int val_irq; >> >> - exynos_report_trigger(&exynos_sensor_conf); >> + exynos_report_trigger(data->reg_conf); >> mutex_lock(&data->lock); >> clk_enable(data->clk); >> >> @@ -405,10 +417,42 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data( >> platform_get_device_id(pdev)->driver_data; >> } >> >> +static int exynos_map_dt_data(struct platform_device *pdev) >> +{ >> + struct exynos_tmu_data *data = platform_get_drvdata(pdev); >> + struct resource res; >> + >> + if (!data) >> + return -ENODEV; >> + >> + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); >> + if (data->id < 0) >> + data->id = 0; >> + >> + data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); >> + if (data->irq <= 0) { >> + dev_err(&pdev->dev, "failed to get IRQ\n"); >> + return -ENODEV; >> + } >> + >> + if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { >> + dev_err(&pdev->dev, "failed to get Resource\n"); >> + return -ENODEV; >> + } >> + >> + data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); >> + if (!data->base) { >> + dev_err(&pdev->dev, "Failed to ioremap memory\n"); >> + return -ENOMEM; > > looks like the statement below fits better here: > return ERR_PTR(-EADDRNOTAVAIL); Ok. > >> + } > > blank line? Ok. > >> + return 0; >> +} >> + >> static int exynos_tmu_probe(struct platform_device *pdev) >> { >> struct exynos_tmu_data *data; >> struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; >> + struct thermal_sensor_conf *sensor_conf; >> int ret, i; >> >> if (!pdata) >> @@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> return -ENOMEM; >> } >> >> - data->irq = platform_get_irq(pdev, 0); >> - if (data->irq < 0) { >> - dev_err(&pdev->dev, "Failed to get platform irq\n"); >> - return data->irq; >> - } >> - >> - INIT_WORK(&data->irq_work, exynos_tmu_work); >> - >> - data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> - if (!data->mem) { >> - dev_err(&pdev->dev, "Failed to get platform resource\n"); >> - return -ENOENT; >> - } >> + data->pdata = pdata; >> + platform_set_drvdata(pdev, data); >> + mutex_init(&data->lock); >> >> - data->base = devm_ioremap_resource(&pdev->dev, data->mem); >> - if (IS_ERR(data->base)) >> - return PTR_ERR(data->base); >> + ret = exynos_map_dt_data(pdev); >> + if (ret) >> + return ret; >> >> + INIT_WORK(&data->irq_work, exynos_tmu_work); >> ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, >> - IRQF_TRIGGER_RISING, "exynos-tmu", data); >> + IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); >> if (ret) { >> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); >> return ret; >> @@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> goto err_clk; >> } >> >> - data->pdata = pdata; >> - platform_set_drvdata(pdev, data); >> - mutex_init(&data->lock); >> - >> ret = exynos_tmu_initialize(pdev); >> if (ret) { >> dev_err(&pdev->dev, "Failed to initialize TMU\n"); >> @@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> >> exynos_tmu_control(pdev, true); >> >> - /* Register the sensor with thermal management interface */ >> - (&exynos_sensor_conf)->driver_data = data; >> - exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] + >> + /* Allocate a structure to register with the exynos core thermal */ >> + sensor_conf = devm_kzalloc(&pdev->dev, >> + sizeof(struct thermal_sensor_conf), GFP_KERNEL); >> + if (!sensor_conf) { >> + dev_err(&pdev->dev, "Failed to allocate registration struct\n"); >> + ret = -ENOMEM; >> + goto err_clk; >> + } >> + data->reg_conf = sensor_conf; >> + sprintf(sensor_conf->name, "therm_zone%d", data->id); >> + sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; >> + sensor_conf->write_emul_temp = >> + (int (*)(void *, unsigned long))exynos_tmu_set_emulation; >> + sensor_conf->driver_data = data; >> + sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] + >> pdata->trigger_enable[1] + pdata->trigger_enable[2]+ >> pdata->trigger_enable[3]; >> >> - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) >> - exynos_sensor_conf.trip_data.trip_val[i] = >> + for (i = 0; i < sensor_conf->trip_data.trip_count; i++) >> + sensor_conf->trip_data.trip_val[i] = >> pdata->threshold + pdata->trigger_levels[i]; >> >> - exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling; >> + sensor_conf->trip_data.trigger_falling = pdata->threshold_falling; >> >> - exynos_sensor_conf.cooling_data.freq_clip_count = >> - pdata->freq_tab_count; >> + sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count; >> for (i = 0; i < pdata->freq_tab_count; i++) { >> - exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max = >> + sensor_conf->cooling_data.freq_data[i].freq_clip_max = >> pdata->freq_tab[i].freq_clip_max; >> - exynos_sensor_conf.cooling_data.freq_data[i].temp_level = >> + sensor_conf->cooling_data.freq_data[i].temp_level = >> pdata->freq_tab[i].temp_level; >> } >> >> - ret = exynos_register_thermal(&exynos_sensor_conf); >> + /* Register the sensor with thermal management interface */ >> + ret = exynos_register_thermal(sensor_conf); >> if (ret) { >> dev_err(&pdev->dev, "Failed to register thermal interface\n"); >> goto err_clk; >> @@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) >> >> exynos_tmu_control(pdev, false); >> >> - exynos_unregister_thermal(&exynos_sensor_conf); >> + exynos_unregister_thermal(data->reg_conf); >> >> clk_unprepare(data->clk); >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index bdf40ef..94d6e8e 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -29,6 +29,8 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -36,9 +38,24 @@ #include "exynos_tmu.h" #include "exynos_tmu_data.h" +/** + * struct exynos_tmu_data : A structure to hold the private data of the TMU + driver + * @id: identifier of the one instance of the TMU controller. + * @pdata: pointer to the tmu platform/configuration data + * @base: base address of the single instance of the TMU controller. + * @irq: irq number of the TMU controller. + * @soc: id of the SOC type. + * @irq_work: pointer to the irq work structure. + * @lock: lock to implement synchronization. + * @clk: pointer to the clock structure. + * @temp_error1: fused value of the first point trim. + * @temp_error2: fused value of the second point trim. + * @reg_conf: pointer to structure to register with core thermal. + */ struct exynos_tmu_data { + int id; struct exynos_tmu_platform_data *pdata; - struct resource *mem; void __iomem *base; int irq; enum soc_type soc; @@ -46,6 +63,7 @@ struct exynos_tmu_data { struct mutex lock; struct clk *clk; u8 temp_error1, temp_error2; + struct thermal_sensor_conf *reg_conf; }; /* @@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) { return -EINVAL; } #endif/*CONFIG_THERMAL_EMULATION*/ -static struct thermal_sensor_conf exynos_sensor_conf = { - .name = "exynos-therm", - .read_temperature = (int (*)(void *))exynos_tmu_read, - .write_emul_temp = exynos_tmu_set_emulation, -}; - static void exynos_tmu_work(struct work_struct *work) { struct exynos_tmu_data *data = container_of(work, @@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work) struct exynos_tmu_registers *reg = pdata->registers; unsigned int val_irq; - exynos_report_trigger(&exynos_sensor_conf); + exynos_report_trigger(data->reg_conf); mutex_lock(&data->lock); clk_enable(data->clk); @@ -405,10 +417,42 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data( platform_get_device_id(pdev)->driver_data; } +static int exynos_map_dt_data(struct platform_device *pdev) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct resource res; + + if (!data) + return -ENODEV; + + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); + if (data->id < 0) + data->id = 0; + + data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (data->irq <= 0) { + dev_err(&pdev->dev, "failed to get IRQ\n"); + return -ENODEV; + } + + if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { + dev_err(&pdev->dev, "failed to get Resource\n"); + return -ENODEV; + } + + data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); + if (!data->base) { + dev_err(&pdev->dev, "Failed to ioremap memory\n"); + return -ENOMEM; + } + return 0; +} + static int exynos_tmu_probe(struct platform_device *pdev) { struct exynos_tmu_data *data; struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; + struct thermal_sensor_conf *sensor_conf; int ret, i; if (!pdata) @@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev) return -ENOMEM; } - data->irq = platform_get_irq(pdev, 0); - if (data->irq < 0) { - dev_err(&pdev->dev, "Failed to get platform irq\n"); - return data->irq; - } - - INIT_WORK(&data->irq_work, exynos_tmu_work); - - data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!data->mem) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENOENT; - } + data->pdata = pdata; + platform_set_drvdata(pdev, data); + mutex_init(&data->lock); - data->base = devm_ioremap_resource(&pdev->dev, data->mem); - if (IS_ERR(data->base)) - return PTR_ERR(data->base); + ret = exynos_map_dt_data(pdev); + if (ret) + return ret; + INIT_WORK(&data->irq_work, exynos_tmu_work); ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, - IRQF_TRIGGER_RISING, "exynos-tmu", data); + IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); if (ret) { dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); return ret; @@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk; } - data->pdata = pdata; - platform_set_drvdata(pdev, data); - mutex_init(&data->lock); - ret = exynos_tmu_initialize(pdev); if (ret) { dev_err(&pdev->dev, "Failed to initialize TMU\n"); @@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev) exynos_tmu_control(pdev, true); - /* Register the sensor with thermal management interface */ - (&exynos_sensor_conf)->driver_data = data; - exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] + + /* Allocate a structure to register with the exynos core thermal */ + sensor_conf = devm_kzalloc(&pdev->dev, + sizeof(struct thermal_sensor_conf), GFP_KERNEL); + if (!sensor_conf) { + dev_err(&pdev->dev, "Failed to allocate registration struct\n"); + ret = -ENOMEM; + goto err_clk; + } + data->reg_conf = sensor_conf; + sprintf(sensor_conf->name, "therm_zone%d", data->id); + sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; + sensor_conf->write_emul_temp = + (int (*)(void *, unsigned long))exynos_tmu_set_emulation; + sensor_conf->driver_data = data; + sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] + pdata->trigger_enable[1] + pdata->trigger_enable[2]+ pdata->trigger_enable[3]; - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) - exynos_sensor_conf.trip_data.trip_val[i] = + for (i = 0; i < sensor_conf->trip_data.trip_count; i++) + sensor_conf->trip_data.trip_val[i] = pdata->threshold + pdata->trigger_levels[i]; - exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling; + sensor_conf->trip_data.trigger_falling = pdata->threshold_falling; - exynos_sensor_conf.cooling_data.freq_clip_count = - pdata->freq_tab_count; + sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count; for (i = 0; i < pdata->freq_tab_count; i++) { - exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max = + sensor_conf->cooling_data.freq_data[i].freq_clip_max = pdata->freq_tab[i].freq_clip_max; - exynos_sensor_conf.cooling_data.freq_data[i].temp_level = + sensor_conf->cooling_data.freq_data[i].temp_level = pdata->freq_tab[i].temp_level; } - ret = exynos_register_thermal(&exynos_sensor_conf); + /* Register the sensor with thermal management interface */ + ret = exynos_register_thermal(sensor_conf); if (ret) { dev_err(&pdev->dev, "Failed to register thermal interface\n"); goto err_clk; @@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) exynos_tmu_control(pdev, false); - exynos_unregister_thermal(&exynos_sensor_conf); + exynos_unregister_thermal(data->reg_conf); clk_unprepare(data->clk);