| Message ID | 1372071051-3167-24-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Zhang Rui |
| Headers | show |
On 24-06-2013 06:50, Amit Daniel Kachhap wrote: > This patch adds configuration data for exynos5440 soc. Also register > definations for the controller are added. > > Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > Acked-by: Kukjin Kim <kgene.kim@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> > --- > drivers/thermal/samsung/exynos_tmu.c | 4 ++ > drivers/thermal/samsung/exynos_tmu_data.c | 71 +++++++++++++++++++++++++++++ > drivers/thermal/samsung/exynos_tmu_data.h | 7 +++ > 3 files changed, 82 insertions(+), 0 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index 6bc86f6..651f460 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = { > .compatible = "samsung,exynos5250-tmu", > .data = (void *)EXYNOS5250_TMU_DRV_DATA, > }, > + { > + .compatible = "samsung,exynos5440-tmu", > + .data = (void *)EXYNOS5440_TMU_DRV_DATA, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, exynos_tmu_match); > diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c > index 2612b45..5952915 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.c > +++ b/drivers/thermal/samsung/exynos_tmu_data.c > @@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { > .tmu_count = 1, > }; > #endif > + > +#if defined(CONFIG_SOC_EXYNOS5440) > +static const struct exynos_tmu_registers exynos5440_tmu_registers = { > + .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, > + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, > + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, > + .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, > + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, > + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, > + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, > + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, > + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, > + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, > + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, > + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, > + .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, > + .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, > + .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, > + .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1, > + .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2, > + .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT, > + .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN, > + .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, > + .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, > + .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, > + .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT, > + .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT, > + .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT, > + .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT, > + .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT, > + .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, > + .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, > + .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, > + .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, > + .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, > + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, > + .tmu_pmin = EXYNOS5440_TMU_PMIN, > +}; > + > +#define EXYNOS5440_TMU_DATA \ > + .trigger_levels[0] = 100, \ > + .trigger_levels[4] = 105, \ > + .trigger_enable[0] = 1, \ > + .trigger_type[0] = SW_TRIP, \ > + .trigger_type[4] = HW_TRIP, \ > + .max_trigger_level = 5, \ > + .gain = 5, \ > + .reference_voltage = 16, \ > + .noise_cancel_mode = 4, \ > + .cal_type = TYPE_ONE_POINT_TRIMMING, \ > + .cal_mode = 0, \ > + .efuse_value = 0x5b2d, \ > + .min_efuse_value = 16, \ > + .max_efuse_value = 76, \ > + .first_point_trim = 25, \ > + .second_point_trim = 70, \ > + .default_temp_offset = 25, \ > + .type = SOC_ARCH_EXYNOS5440, \ > + .registers = &exynos5440_tmu_registers, \ > + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ > + TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY), > + > +struct exynos_tmu_init_data const exynos5440_default_tmu_data = { > + .tmu_data = { > + { EXYNOS5440_TMU_DATA } , > + { EXYNOS5440_TMU_DATA } , > + { EXYNOS5440_TMU_DATA } , > + }, > + .tmu_count = 3, > +}; > +#endif > diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h > index ad263e9..43ce5fb 100644 > --- a/drivers/thermal/samsung/exynos_tmu_data.h > +++ b/drivers/thermal/samsung/exynos_tmu_data.h > @@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; > #define EXYNOS5250_TMU_DRV_DATA (NULL) > #endif > > +#if defined(CONFIG_SOC_EXYNOS5440) > +extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; > +#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) > +#else > +#define EXYNOS5440_TMU_DRV_DATA (NULL) > +#endif > + > #endif /*_EXYNOS_TMU_DATA_H*/ >
On Monday, June 24, 2013 7:51 PM, Amit Daniel Kachhap wrote: >This patch adds configuration data for exynos5440 soc. Also register >definations for the controller are added. > >Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >Acked-by: Kukjin Kim <kgene.kim@samsung.com> >Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >--- > drivers/thermal/samsung/exynos_tmu.c | 4 ++ > drivers/thermal/samsung/exynos_tmu_data.c | 71 +++++++++++++++++++++++++++++ > drivers/thermal/samsung/exynos_tmu_data.h | 7 +++ > 3 files changed, 82 insertions(+), 0 deletions(-) > >diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >index 6bc86f6..651f460 100644 >--- a/drivers/thermal/samsung/exynos_tmu.c >+++ b/drivers/thermal/samsung/exynos_tmu.c >@@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = { > .compatible = "samsung,exynos5250-tmu", > .data = (void *)EXYNOS5250_TMU_DRV_DATA, > }, >+ { >+ .compatible = "samsung,exynos5440-tmu", >+ .data = (void *)EXYNOS5440_TMU_DRV_DATA, >+ }, > {}, > }; > MODULE_DEVICE_TABLE(of, exynos_tmu_match); >diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c >index 2612b45..5952915 100644 >--- a/drivers/thermal/samsung/exynos_tmu_data.c >+++ b/drivers/thermal/samsung/exynos_tmu_data.c >@@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { > .tmu_count = 1, > }; > #endif >+ >+#if defined(CONFIG_SOC_EXYNOS5440) >+static const struct exynos_tmu_registers exynos5440_tmu_registers = { >+ .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, >+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, >+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, >+ .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, >+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, >+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, >+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, >+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, >+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, >+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, >+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, >+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, >+ .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, >+ .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, >+ .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, >+ .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1, >+ .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2, >+ .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT, >+ .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN, >+ .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, >+ .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, >+ .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, >+ .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT, >+ .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT, >+ .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT, >+ .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT, >+ .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT, >+ .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, >+ .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, >+ .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, >+ .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, >+ .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, >+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, >+ .tmu_pmin = EXYNOS5440_TMU_PMIN, >+}; >+ >+#define EXYNOS5440_TMU_DATA \ >+ .trigger_levels[0] = 100, \ >+ .trigger_levels[4] = 105, \ >+ .trigger_enable[0] = 1, \ >+ .trigger_type[0] = SW_TRIP, \ >+ .trigger_type[4] = HW_TRIP, \ >+ .max_trigger_level = 5, \ >+ .gain = 5, \ >+ .reference_voltage = 16, \ >+ .noise_cancel_mode = 4, \ >+ .cal_type = TYPE_ONE_POINT_TRIMMING, \ >+ .cal_mode = 0, \ .cal_mode = SW_MODE is a clearer expression. >+ .efuse_value = 0x5b2d, \ .efuse_value should be incremented by one. Thanks, Jungseok Lee >+ .min_efuse_value = 16, \ >+ .max_efuse_value = 76, \ >+ .first_point_trim = 25, \ >+ .second_point_trim = 70, \ >+ .default_temp_offset = 25, \ >+ .type = SOC_ARCH_EXYNOS5440, \ >+ .registers = &exynos5440_tmu_registers, \ >+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ >+ TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY), >+ >+struct exynos_tmu_init_data const exynos5440_default_tmu_data = { >+ .tmu_data = { >+ { EXYNOS5440_TMU_DATA } , >+ { EXYNOS5440_TMU_DATA } , >+ { EXYNOS5440_TMU_DATA } , >+ }, >+ .tmu_count = 3, >+}; >+#endif >diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h >index ad263e9..43ce5fb 100644 >--- a/drivers/thermal/samsung/exynos_tmu_data.h >+++ b/drivers/thermal/samsung/exynos_tmu_data.h >@@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; > #define EXYNOS5250_TMU_DRV_DATA (NULL) > #endif > >+#if defined(CONFIG_SOC_EXYNOS5440) >+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; >+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) >+#else >+#define EXYNOS5440_TMU_DRV_DATA (NULL) >+#endif >+ > #endif /*_EXYNOS_TMU_DATA_H*/ >-- >1.7.1 > >-- >To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 26 June 2013 06:54, Jungseok Lee <jays.lee@samsung.com> wrote: > On Monday, June 24, 2013 7:51 PM, Amit Daniel Kachhap wrote: >>This patch adds configuration data for exynos5440 soc. Also register >>definations for the controller are added. >> >>Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >>Acked-by: Kukjin Kim <kgene.kim@samsung.com> >>Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >>--- >> drivers/thermal/samsung/exynos_tmu.c | 4 ++ >> drivers/thermal/samsung/exynos_tmu_data.c | 71 +++++++++++++++++++++++++++++ >> drivers/thermal/samsung/exynos_tmu_data.h | 7 +++ >> 3 files changed, 82 insertions(+), 0 deletions(-) >> >>diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >>index 6bc86f6..651f460 100644 >>--- a/drivers/thermal/samsung/exynos_tmu.c >>+++ b/drivers/thermal/samsung/exynos_tmu.c >>@@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = { >> .compatible = "samsung,exynos5250-tmu", >> .data = (void *)EXYNOS5250_TMU_DRV_DATA, >> }, >>+ { >>+ .compatible = "samsung,exynos5440-tmu", >>+ .data = (void *)EXYNOS5440_TMU_DRV_DATA, >>+ }, >> {}, >> }; >> MODULE_DEVICE_TABLE(of, exynos_tmu_match); >>diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c >>index 2612b45..5952915 100644 >>--- a/drivers/thermal/samsung/exynos_tmu_data.c >>+++ b/drivers/thermal/samsung/exynos_tmu_data.c >>@@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { >> .tmu_count = 1, >> }; >> #endif >>+ >>+#if defined(CONFIG_SOC_EXYNOS5440) >>+static const struct exynos_tmu_registers exynos5440_tmu_registers = { >>+ .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, >>+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, >>+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, >>+ .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, >>+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, >>+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, >>+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, >>+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, >>+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, >>+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, >>+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, >>+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, >>+ .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, >>+ .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, >>+ .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, >>+ .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1, >>+ .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2, >>+ .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT, >>+ .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN, >>+ .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, >>+ .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, >>+ .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, >>+ .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT, >>+ .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT, >>+ .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT, >>+ .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT, >>+ .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT, >>+ .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, >>+ .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, >>+ .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, >>+ .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, >>+ .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, >>+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, >>+ .tmu_pmin = EXYNOS5440_TMU_PMIN, >>+}; >>+ >>+#define EXYNOS5440_TMU_DATA \ >>+ .trigger_levels[0] = 100, \ >>+ .trigger_levels[4] = 105, \ >>+ .trigger_enable[0] = 1, \ >>+ .trigger_type[0] = SW_TRIP, \ >>+ .trigger_type[4] = HW_TRIP, \ >>+ .max_trigger_level = 5, \ >>+ .gain = 5, \ >>+ .reference_voltage = 16, \ >>+ .noise_cancel_mode = 4, \ >>+ .cal_type = TYPE_ONE_POINT_TRIMMING, \ >>+ .cal_mode = 0, \ > > .cal_mode = SW_MODE is a clearer expression. > >>+ .efuse_value = 0x5b2d, \ > > .efuse_value should be incremented by one. > > Thanks, > Jungseok Lee >>+ .min_efuse_value = 16, \ >>+ .max_efuse_value = 76, \ >>+ .first_point_trim = 25, \ >>+ .second_point_trim = 70, \ >>+ .default_temp_offset = 25, \ >>+ .type = SOC_ARCH_EXYNOS5440, \ >>+ .registers = &exynos5440_tmu_registers, \ >>+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ >>+ TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY), >>+ >>+struct exynos_tmu_init_data const exynos5440_default_tmu_data = { >>+ .tmu_data = { >>+ { EXYNOS5440_TMU_DATA } , >>+ { EXYNOS5440_TMU_DATA } , >>+ { EXYNOS5440_TMU_DATA } , >>+ }, >>+ .tmu_count = 3, >>+}; >>+#endif >>diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h >>index ad263e9..43ce5fb 100644 >>--- a/drivers/thermal/samsung/exynos_tmu_data.h >>+++ b/drivers/thermal/samsung/exynos_tmu_data.h >>@@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; >> #define EXYNOS5250_TMU_DRV_DATA (NULL) >> #endif >> >>+#if defined(CONFIG_SOC_EXYNOS5440) >>+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; >>+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) >>+#else >>+#define EXYNOS5440_TMU_DRV_DATA (NULL) >>+#endif >>+ >> #endif /*_EXYNOS_TMU_DATA_H*/ I'm making some changes for exynos5420 and i've a doubt regarding passing platform data. When we have DT support in the driver, Why are we not using DT to pass all these details ? >>-- >>1.7.1 >> >>-- >>To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >>the body of a message to majordomo@vger.kernel.org >>More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 6bc86f6..651f460 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = { .compatible = "samsung,exynos5250-tmu", .data = (void *)EXYNOS5250_TMU_DRV_DATA, }, + { + .compatible = "samsung,exynos5440-tmu", + .data = (void *)EXYNOS5440_TMU_DRV_DATA, + }, {}, }; MODULE_DEVICE_TABLE(of, exynos_tmu_match); diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 2612b45..5952915 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { .tmu_count = 1, }; #endif + +#if defined(CONFIG_SOC_EXYNOS5440) +static const struct exynos_tmu_registers exynos5440_tmu_registers = { + .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, + .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, + .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, + .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, + .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1, + .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2, + .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT, + .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN, + .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, + .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, + .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, + .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT, + .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT, + .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT, + .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT, + .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT, + .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, + .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, + .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, + .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, + .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, + .tmu_pmin = EXYNOS5440_TMU_PMIN, +}; + +#define EXYNOS5440_TMU_DATA \ + .trigger_levels[0] = 100, \ + .trigger_levels[4] = 105, \ + .trigger_enable[0] = 1, \ + .trigger_type[0] = SW_TRIP, \ + .trigger_type[4] = HW_TRIP, \ + .max_trigger_level = 5, \ + .gain = 5, \ + .reference_voltage = 16, \ + .noise_cancel_mode = 4, \ + .cal_type = TYPE_ONE_POINT_TRIMMING, \ + .cal_mode = 0, \ + .efuse_value = 0x5b2d, \ + .min_efuse_value = 16, \ + .max_efuse_value = 76, \ + .first_point_trim = 25, \ + .second_point_trim = 70, \ + .default_temp_offset = 25, \ + .type = SOC_ARCH_EXYNOS5440, \ + .registers = &exynos5440_tmu_registers, \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY), + +struct exynos_tmu_init_data const exynos5440_default_tmu_data = { + .tmu_data = { + { EXYNOS5440_TMU_DATA } , + { EXYNOS5440_TMU_DATA } , + { EXYNOS5440_TMU_DATA } , + }, + .tmu_count = 3, +}; +#endif diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index ad263e9..43ce5fb 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; #define EXYNOS5250_TMU_DRV_DATA (NULL) #endif +#if defined(CONFIG_SOC_EXYNOS5440) +extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; +#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data) +#else +#define EXYNOS5440_TMU_DRV_DATA (NULL) +#endif + #endif /*_EXYNOS_TMU_DATA_H*/