Message ID | 1379282563-14650-6-git-send-email-eduardo.valentin@ti.com (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Zhang Rui |
Headers | show |
On 09/15/2013 03:02 PM, Eduardo Valentin wrote: > This patch adds to lm75 temperature sensor the possibility > to expose itself as thermal zone device, registered on the > thermal framework. > > The thermal zone is built only if a device tree node > describing a thermal zone for this sensor is present > inside the lm75 DT node. Otherwise, the driver behavior > will be the same. > > Cc: Jean Delvare <khali@linux-fr.org> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: lm-sensors@lm-sensors.org > Cc: linux-kernel@vger.kernel.org > Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> > --- > drivers/hwmon/lm75.c | 46 +++++++++++++++++++++++++++++++++++++++++----- > 1 file changed, 41 insertions(+), 5 deletions(-) > > diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c > index c03b490..2ba09ef 100644 > --- a/drivers/hwmon/lm75.c > +++ b/drivers/hwmon/lm75.c > @@ -27,6 +27,8 @@ > #include <linux/hwmon-sysfs.h> > #include <linux/err.h> > #include <linux/mutex.h> > +#include <linux/of.h> > +#include <linux/thermal.h> > #include "lm75.h" > > > @@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = { > /* Each client has this additional data */ > struct lm75_data { > struct device *hwmon_dev; > + struct thermal_zone_device *tz; > struct mutex update_lock; > u8 orig_conf; > u8 resolution; /* In bits, between 9 and 12 */ > @@ -90,22 +93,42 @@ static struct lm75_data *lm75_update_device(struct device *dev); > > /*-----------------------------------------------------------------------*/ > > +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) > +{ > + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); > +} > + > /* sysfs attributes for hwmon */ > > +static int lm75_read_temp(void *dev, long *temp) > +{ > + struct lm75_data *data = lm75_update_device(dev); > + long temperature; > + > + if (IS_ERR(data)) > + return PTR_ERR(data); > + > + temperature = lm75_reg_to_mc(data->temp[0], data->resolution); > + if (temperature < 0) > + dev_warn(data->hwmon_dev, > + "operating in negative temp: %ld\n", temperature); Please drop this warning. It is not the responsibility of the chip driver to declare valid operational conditions, much less an arbitrary one like zero degrees C. Guenter > + > + *temp = temperature; > + > + return 0; > +} > + > static ssize_t show_temp(struct device *dev, struct device_attribute *da, > char *buf) > { > struct sensor_device_attribute *attr = to_sensor_dev_attr(da); > struct lm75_data *data = lm75_update_device(dev); > - long temp; > > if (IS_ERR(data)) > return PTR_ERR(data); > > - temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) > - >> (data->resolution - 8); > - > - return sprintf(buf, "%ld\n", temp); > + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], > + data->resolution)); > } > > static ssize_t set_temp(struct device *dev, struct device_attribute *da, > @@ -271,6 +294,17 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) > goto exit_remove; > } > > + data->tz = thermal_zone_of_sensor_register(&client->dev, > + 0, > + &client->dev, > + lm75_read_temp, NULL); > + if (IS_ERR(data->tz)) { > + dev_warn(&client->dev, > + "Could not parse thermal data in device tree: %ld\n", > + PTR_ERR(data->tz)); > + data->tz = NULL; > + } > + > dev_info(&client->dev, "%s: sensor '%s'\n", > dev_name(data->hwmon_dev), client->name); > > @@ -285,6 +319,8 @@ static int lm75_remove(struct i2c_client *client) > { > struct lm75_data *data = i2c_get_clientdata(client); > > + /* thermal zone life cycle is not our responsibility */ > + thermal_zone_of_sensor_unregister(&client->dev, data->tz); > hwmon_device_unregister(data->hwmon_dev); > sysfs_remove_group(&client->dev.kobj, &lm75_group); > lm75_write_value(client, LM75_REG_CONF, data->orig_conf); > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c03b490..2ba09ef 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,6 +27,8 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/of.h> +#include <linux/thermal.h> #include "lm75.h" @@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex update_lock; u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ @@ -90,22 +93,42 @@ static struct lm75_data *lm75_update_device(struct device *dev); /*-----------------------------------------------------------------------*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + /* sysfs attributes for hwmon */ +static int lm75_read_temp(void *dev, long *temp) +{ + struct lm75_data *data = lm75_update_device(dev); + long temperature; + + if (IS_ERR(data)) + return PTR_ERR(data); + + temperature = lm75_reg_to_mc(data->temp[0], data->resolution); + if (temperature < 0) + dev_warn(data->hwmon_dev, + "operating in negative temp: %ld\n", temperature); + + *temp = temperature; + + return 0; +} + static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm75_data *data = lm75_update_device(dev); - long temp; if (IS_ERR(data)) return PTR_ERR(data); - temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) - >> (data->resolution - 8); - - return sprintf(buf, "%ld\n", temp); + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); } static ssize_t set_temp(struct device *dev, struct device_attribute *da, @@ -271,6 +294,17 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) goto exit_remove; } + data->tz = thermal_zone_of_sensor_register(&client->dev, + 0, + &client->dev, + lm75_read_temp, NULL); + if (IS_ERR(data->tz)) { + dev_warn(&client->dev, + "Could not parse thermal data in device tree: %ld\n", + PTR_ERR(data->tz)); + data->tz = NULL; + } + dev_info(&client->dev, "%s: sensor '%s'\n", dev_name(data->hwmon_dev), client->name); @@ -285,6 +319,8 @@ static int lm75_remove(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); + /* thermal zone life cycle is not our responsibility */ + thermal_zone_of_sensor_unregister(&client->dev, data->tz); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm75_group); lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
This patch adds to lm75 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm75 DT node. Otherwise, the driver behavior will be the same. Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> --- drivers/hwmon/lm75.c | 46 +++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 5 deletions(-)