[RFC,09/10] ARM: STi: Add STiH415 ethernet support.

Message ID	1384264389-7697-1-git-send-email-srinivas.kandagatla@st.com (mailing list archive)
State	RFC, archived
Headers	show Return-Path: <linux-pm-owner@kernel.org> From: <srinivas.kandagatla@st.com> To: <linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org> Cc: Rob Herring <rob.herring@calxeda.com>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Stephen Warren <swarren@wwwdotorg.org>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Rob Landley <rob@landley.net>, Russell King <linux@arm.linux.org.uk>, Srinivas Kandagatla <srinivas.kandagatla@st.com>, Stuart Menefy <stuart.menefy@st.com>, Pavel Machek <pavel@ucw.cz>, "Rafael J. Wysocki" <rjw@rjwysocki.net>, Len Brown <len.brown@intel.com>, <stephen.gallimore@st.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Giuseppe Cavallaro <peppe.cavallaro@st.com>, Grant Likely <grant.likely@linaro.org>, <devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <kernel@stlinux.com>, <linux-pm@vger.kernel.org> Subject: [PATCH RFC 09/10] ARM: STi: Add STiH415 ethernet support. Date: Tue, 12 Nov 2013 13:53:09 +0000 Message-ID: <1384264389-7697-1-git-send-email-srinivas.kandagatla@st.com> In-Reply-To: <1384264311-7308-1-git-send-email-srinivas.kandagatla@st.com> References: <1384264311-7308-1-git-send-email-srinivas.kandagatla@st.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-pm-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi index 174c799..d047dbc 100644 --- a/arch/arm/boot/dts/stih415-clock.dtsi +++ b/arch/arm/boot/dts/stih415-clock.dtsi @@ -34,5 +34,19 @@ compatible = "fixed-clock"; clock-frequency = <100000000>; }; + + CLKS_GMAC0_PHY: clockgenA1@7 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "CLKS_GMAC0_PHY"; + }; + + CLKS_ETH1_PHY: clockgenA0@7 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "CLKS_ETH1_PHY"; + }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 1d322b2..c087af8 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -86,6 +86,57 @@ }; }; }; + + gmac1 { + pinctrl_mii1: mii1 { + st,pins { + txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&PIO0 7 ALT1 IN BYPASS 1000>; + mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; + mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&PIO1 2 ALT1 IN BYPASS 1000>; + mdint = <&PIO1 3 ALT1 IN BYPASS 0>; + rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>; + }; + }; + + pinctrl_rgmii1: rgmii1-0 { + st,pins { + txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>; + txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>; + txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>; + txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>; + txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>; + mdio = <&PIO1 0 ALT1 OUT BYPASS 0>; + mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>; + rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>; + + rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>; + rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>; + + clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>; + }; + }; + }; + }; pin-controller-front { @@ -197,6 +248,37 @@ }; }; }; + + gmac0{ + pinctrl_mii0: mii0 { + st,pins { + mdint = <&PIO13 6 ALT2 IN BYPASS 0>; + txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + + txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; + + txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>; + txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; + crs = <&PIO15 2 ALT2 IN BYPASS 1000>; + col = <&PIO15 3 ALT2 IN BYPASS 1000>; + mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>; + mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>; + + rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>; + phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>; + + }; + }; + }; }; pin-controller-left { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index 0c0776e..c2b18c8 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -94,5 +94,61 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; + + ethernet0: ethernet0{ + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + compatible = "st,stih415-dwmac"; + reg = <0x148 0x4>; + st,syscon = <&syscfg_rear>; + resets = <&softreset STIH415_ETH0_SOFTRESET>; + ranges; + + dwmac0:dwmac@fe810000 { + device_type = "network"; + compatible = "snps,dwmac", "snps,dwmac-3.610"; + status = "disabled"; + reg = <0xfe810000 0x8000>; + interrupts = <0 147 0>, <0 148 0>, <0 149 0>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + + snps,pbl = <32>; + snps,mixed-burst; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mii0>; + clock-names = "stmmaceth"; + clocks = <&CLKS_GMAC0_PHY>; + }; + }; + + ethernet1: ethernet1 { + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + compatible = "st,stih415-dwmac"; + reg = <0x74 0x4>; + st,syscon = <&syscfg_sbc>; + resets = <&softreset STIH415_ETH1_SOFTRESET>; + ranges; + + dwmac1: dwmac@fef08000 { + device_type = "network"; + compatible = "snps,dwmac", "snps,dwmac-3.610"; + status = "disabled"; + reg = <0xfef08000 0x8000>; + interrupts = <0 150 0>, <0 151 0>, <0 152 0>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + + snps,pbl = <32>; + snps,mixed-burst; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mii1>; + clock-names = "stmmaceth"; + clocks = <&CLKS_ETH1_PHY>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index 8e694d2..9ae9ca9 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -20,6 +20,8 @@ aliases { ttyAS0 = &serial2; + ethernet0 = &dwmac0; + ethernet1 = &dwmac1; }; soc { @@ -37,5 +39,35 @@ }; }; + ethernet0: ethernet0{ + status = "okay"; + st,tx-retime-src = "txclk"; + + dwmac0:dwmac@fe810000 { + status = "okay"; + phy-mode = "mii"; + snps,phy-addr = <0x1>; + + snps,reset-gpio = <&PIO106 2>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + }; + }; + + ethernet1: ethernet1 { + status = "okay"; + st,tx-retime-src = "txclk"; + + dwmac1: dwmac@fef08000 { + status = "okay"; + phy-mode = "mii"; + snps,phy-addr = <0x1>; + + snps,reset-gpio = <&PIO4 7>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 133e181..7ce1380 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -19,6 +19,7 @@ aliases { ttyAS0 = &sbc_serial1; + ethernet1 = &dwmac1; }; soc { sbc_serial1: serial@fe531000 { @@ -38,5 +39,37 @@ default-state = "off"; }; }; + + /** + * ethernet clk routing: + * for + * max-speed = <1000>; + * set + * st,tx-retime-src = "clk_125"; + * + * for + * max-speed = <100>; + * set + * st,tx-retime-src = "clkgen"; + */ + + ethernet1: ethernet1 { + status = "okay"; + st,tx-retime-src = "clkgen"; + + dwmac1: dwmac@fef08000 { + status = "okay"; + phy-mode = "rgmii-id"; + max-speed = <100>; + snps,phy-addr = <0x1>; + + snps,reset-gpio = <&PIO3 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-0 = <&pinctrl_rgmii1>; + }; + }; + }; };

[RFC,09/10] ARM: STi: Add STiH415 ethernet support.

Commit Message

Patch