| Message ID | 1403705421-17597-8-git-send-email-lorenzo.pieralisi@arm.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, Jun 25, 2014 at 03:10:20PM +0100, Lorenzo Pieralisi wrote: > With the introduction of DT based idle states, CPUidle drivers for > ARM can now initialize idle states data through properties in the device > tree. > > This patch adds code to the Exynos CPUidle driver to dynamically > initialize idle states data through the updated device tree source > files. > > Cc: Kukjin Kim <kgene.kim@samsung.com> > Cc: Tomasz Figa <t.figa@samsung.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > --- > Compile tested, I am not sure I patched the right dts files, please check. > > .../devicetree/bindings/arm/exynos/idle-states.txt | 27 ++++++++++++++++++++ > arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++ > arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++ > arch/arm/boot/dts/exynos5410.dtsi | 17 +++++++++++++ > drivers/cpuidle/Kconfig.arm | 1 + > drivers/cpuidle/cpuidle-exynos.c | 29 +++++++++++++--------- > 6 files changed, 93 insertions(+), 12 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/exynos/idle-states.txt > > diff --git a/Documentation/devicetree/bindings/arm/exynos/idle-states.txt b/Documentation/devicetree/bindings/arm/exynos/idle-states.txt > new file mode 100644 > index 0000000..342ecb4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/exynos/idle-states.txt > @@ -0,0 +1,27 @@ > +idle-states node > +---------------- > + > +On Exynos platforms with power management capabilities, the device > +tree source file must contain the idle-states node[1]. As defined in [1] the > +idle-states node must contain an entry-method property that for Exynos > +platforms can be one of: > + > + - "samsung,exynos" Similarly to the TC2 binding, what does this mean? What is a kernel expected to do when it sees this entry-method? Using "samsung,exynos" as the entry-method feels like something that's going to bite us; it sounds far too wide-reaching. > static int exynos_cpuidle_probe(struct platform_device *pdev) > { > - int ret; > + int ret, i; > + struct cpuidle_driver *drv = &exynos_idle_driver; > > exynos_enter_aftr = (void *)(pdev->dev.platform_data); > > - ret = cpuidle_register(&exynos_idle_driver, NULL); > + drv->cpumask = (struct cpumask *) cpu_possible_mask; This assignment looks scary to me. Why do we need to do this, and why are we throwing away the constness of cpu_possible_mask? Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wednesday, June 25, 2014 03:10:20 PM Lorenzo Pieralisi wrote: > With the introduction of DT based idle states, CPUidle drivers for > ARM can now initialize idle states data through properties in the device > tree. > > This patch adds code to the Exynos CPUidle driver to dynamically > initialize idle states data through the updated device tree source > files. > > Cc: Kukjin Kim <kgene.kim@samsung.com> > Cc: Tomasz Figa <t.figa@samsung.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > --- > Compile tested, I am not sure I patched the right dts files, please check. cpuidle-exynos driver is currently working properly in deeper cpuidle mode (AFTR) on Exynos4210 and Exynos5250 (please also see the following patch from Tomasz Figa: [1]). There is ongoing work to AFTR mode work also on Exynos4x12 and Exynos3250 but it is not complete yet. Exynos5410 OTOH should probably use the generic big little cpuidle driver (this SoC is similar to Exynos5420 one for which Chander Kashyap has developed cpuidle-big_little support [2]). Making long story short, I think that your patch should depend on patch [1] and update only exynos4210.dtsi and exynos5250.dtsi. Also for your patch #6 there needs to be some coordination with merging of Chander's patchset ([2]). [1] http://www.spinics.net/lists/arm-kernel/msg341023.html [2] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg664470.html > .../devicetree/bindings/arm/exynos/idle-states.txt | 27 ++++++++++++++++++++ > arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++ > arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++ > arch/arm/boot/dts/exynos5410.dtsi | 17 +++++++++++++ > drivers/cpuidle/Kconfig.arm | 1 + > drivers/cpuidle/cpuidle-exynos.c | 29 +++++++++++++--------- > 6 files changed, 93 insertions(+), 12 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/exynos/idle-states.txt Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 25, 2014 at 04:13:33PM +0100, Mark Rutland wrote: > On Wed, Jun 25, 2014 at 03:10:20PM +0100, Lorenzo Pieralisi wrote: > > With the introduction of DT based idle states, CPUidle drivers for > > ARM can now initialize idle states data through properties in the device > > tree. > > > > This patch adds code to the Exynos CPUidle driver to dynamically > > initialize idle states data through the updated device tree source > > files. > > > > Cc: Kukjin Kim <kgene.kim@samsung.com> > > Cc: Tomasz Figa <t.figa@samsung.com> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > --- > > Compile tested, I am not sure I patched the right dts files, please check. > > > > .../devicetree/bindings/arm/exynos/idle-states.txt | 27 ++++++++++++++++++++ > > arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++ > > arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++ > > arch/arm/boot/dts/exynos5410.dtsi | 17 +++++++++++++ > > drivers/cpuidle/Kconfig.arm | 1 + > > drivers/cpuidle/cpuidle-exynos.c | 29 +++++++++++++--------- > > 6 files changed, 93 insertions(+), 12 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/arm/exynos/idle-states.txt > > > > diff --git a/Documentation/devicetree/bindings/arm/exynos/idle-states.txt b/Documentation/devicetree/bindings/arm/exynos/idle-states.txt > > new file mode 100644 > > index 0000000..342ecb4 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/exynos/idle-states.txt > > @@ -0,0 +1,27 @@ > > +idle-states node > > +---------------- > > + > > +On Exynos platforms with power management capabilities, the device > > +tree source file must contain the idle-states node[1]. As defined in [1] the > > +idle-states node must contain an entry-method property that for Exynos > > +platforms can be one of: > > + > > + - "samsung,exynos" > > Similarly to the TC2 binding, what does this mean? > > What is a kernel expected to do when it sees this entry-method? > > Using "samsung,exynos" as the entry-method feels like something that's > going to bite us; it sounds far too wide-reaching. Same story as TC2, it adds nothing to the patch, it is just there for compliance with current DT bindings, but useless and will disappear. > > static int exynos_cpuidle_probe(struct platform_device *pdev) > > { > > - int ret; > > + int ret, i; > > + struct cpuidle_driver *drv = &exynos_idle_driver; > > > > exynos_enter_aftr = (void *)(pdev->dev.platform_data); > > > > - ret = cpuidle_register(&exynos_idle_driver, NULL); > > + drv->cpumask = (struct cpumask *) cpu_possible_mask; > > This assignment looks scary to me. Why do we need to do this, and why > are we throwing away the constness of cpu_possible_mask? Yes, that's how it is done in CPUidle core if the idle driver does not initialize cpumask pointer, I guess it is to save some bytes, but I agree with you, I do not like that either, I will allocate the mask and copy. Thanks, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/exynos/idle-states.txt b/Documentation/devicetree/bindings/arm/exynos/idle-states.txt new file mode 100644 index 0000000..342ecb4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/exynos/idle-states.txt @@ -0,0 +1,27 @@ +idle-states node +---------------- + +On Exynos platforms with power management capabilities, the device +tree source file must contain the idle-states node[1]. As defined in [1] the +idle-states node must contain an entry-method property that for Exynos +platforms can be one of: + + - "samsung,exynos" + +Exynos idle-states nodes example: + + idle-states { + entry-method = "samsung,exynos"; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + timer-state-retained; + power-rank = <0>; + entry-latency-us = <1000>; + exit-latency-us = <300>; + min-residency-us = <100000>; + }; + }; + +[1] ARM Linux Kernel documentation - Idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 3e678fa..b0ccfca 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -45,11 +45,26 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "samsung,exynos"; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + timer-state-retained; + power-rank = <0>; + entry-latency-us = <1000>; + exit-latency-us = <300>; + min-residency-us = <100000>; + }; + + }; + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; cpu1: cpu@1 { @@ -57,6 +72,7 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 834fb5a..b806653 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -58,17 +58,32 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "samsung,exynos"; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + timer-state-retained; + power-rank = <0>; + entry-latency-us = <1000>; + exit-latency-us = <300>; + min-residency-us = <100000>; + }; + }; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1700000000>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 3839c26..82e4b7b 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -24,28 +24,45 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "samsung,exynos"; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + timer-state-retained; + power-rank = <0>; + entry-latency-us = <1000>; + exit-latency-us = <300>; + min-residency-us = <100000>; + }; + }; + CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + cpu-idle-states = <&CLUSTER_SLEEP_0>; }; }; diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index a9b089c..d8a9cd2 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -60,5 +60,6 @@ config ARM_AT91_CPUIDLE config ARM_EXYNOS_CPUIDLE bool "Cpu Idle Driver for the Exynos processors" depends on ARCH_EXYNOS + select DT_IDLE_STATES help Select this to enable cpuidle for Exynos processors diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c index 7c01512..d76af54 100644 --- a/drivers/cpuidle/cpuidle-exynos.c +++ b/drivers/cpuidle/cpuidle-exynos.c @@ -18,6 +18,8 @@ #include <asm/suspend.h> #include <asm/cpuidle.h> +#include "dt_idle_states.h" + static void (*exynos_enter_aftr)(void); static int idle_finisher(unsigned long flags) @@ -60,26 +62,29 @@ static struct cpuidle_driver exynos_idle_driver = { .owner = THIS_MODULE, .states = { [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, }, - .state_count = 2, - .safe_state_index = 0, }; static int exynos_cpuidle_probe(struct platform_device *pdev) { - int ret; + int ret, i; + struct cpuidle_driver *drv = &exynos_idle_driver; exynos_enter_aftr = (void *)(pdev->dev.platform_data); - ret = cpuidle_register(&exynos_idle_driver, NULL); + drv->cpumask = (struct cpumask *) cpu_possible_mask; + + /* Start at index 1, index 0 standard WFI */ + ret = dt_init_idle_driver(drv, NULL, 1, false); + if (ret) { + dev_err(&pdev->dev, "failed to initialize idle states\n"); + return ret; + } + + for (i = 1; i < drv->state_count; i++) + drv->states[i].enter = exynos_enter_lowpower; + + ret = cpuidle_register(drv, NULL); if (ret) { dev_err(&pdev->dev, "failed to register cpuidle driver\n"); return ret;
With the introduction of DT based idle states, CPUidle drivers for ARM can now initialize idle states data through properties in the device tree. This patch adds code to the Exynos CPUidle driver to dynamically initialize idle states data through the updated device tree source files. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> --- Compile tested, I am not sure I patched the right dts files, please check. .../devicetree/bindings/arm/exynos/idle-states.txt | 27 ++++++++++++++++++++ arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++ arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 17 +++++++++++++ drivers/cpuidle/Kconfig.arm | 1 + drivers/cpuidle/cpuidle-exynos.c | 29 +++++++++++++--------- 6 files changed, 93 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/exynos/idle-states.txt