@@ -38,6 +38,7 @@
compatible = "arm,cortex-a15";
reg = <0>;
cci-control-port = <&cci_control1>;
+ cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
};
cpu1: cpu@1 {
@@ -45,6 +46,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
cci-control-port = <&cci_control1>;
+ cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
};
cpu2: cpu@2 {
@@ -52,6 +54,7 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
cci-control-port = <&cci_control2>;
+ cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
};
cpu3: cpu@3 {
@@ -59,6 +62,7 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
cci-control-port = <&cci_control2>;
+ cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
};
cpu4: cpu@4 {
@@ -66,6 +70,25 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
cci-control-port = <&cci_control2>;
+ cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+ };
+
+ idle-states {
+ CLUSTER_SLEEP_BIG: cluster-sleep-big {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ entry-latency-us = <1000>;
+ exit-latency-us = <700>;
+ min-residency-us = <3500>;
+ };
+
+ CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ entry-latency-us = <1000>;
+ exit-latency-us = <500>;
+ min-residency-us = <3000>;
+ };
};
};
@@ -12,6 +12,7 @@ config ARM_BIG_LITTLE_CPUIDLE
depends on ARCH_VEXPRESS_TC2_PM
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
+ select DT_IDLE_STATES
help
Select this option to enable CPU idle driver for big.LITTLE based
ARM systems. Driver manages CPUs coordination through MCPM and
@@ -24,6 +24,8 @@
#include <asm/smp_plat.h>
#include <asm/suspend.h>
+#include "dt_idle_states.h"
+
static int bl_enter_powerdown(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx);
@@ -61,32 +63,12 @@ static struct cpuidle_driver bl_idle_little_driver = {
.name = "little_idle",
.owner = THIS_MODULE,
.states[0] = ARM_CPUIDLE_WFI_STATE,
- .states[1] = {
- .enter = bl_enter_powerdown,
- .exit_latency = 700,
- .target_residency = 2500,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
- .name = "C1",
- .desc = "ARM little-cluster power down",
- },
- .state_count = 2,
};
static struct cpuidle_driver bl_idle_big_driver = {
.name = "big_idle",
.owner = THIS_MODULE,
.states[0] = ARM_CPUIDLE_WFI_STATE,
- .states[1] = {
- .enter = bl_enter_powerdown,
- .exit_latency = 500,
- .target_residency = 2000,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
- .name = "C1",
- .desc = "ARM big-cluster power down",
- },
- .state_count = 2,
};
/*
@@ -165,7 +147,8 @@ static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
static int __init bl_idle_init(void)
{
- int ret;
+ int ret, i;
+ struct cpuidle_driver *drv;
/*
* Initialize the driver just for a compliant set of machines
@@ -187,6 +170,24 @@ static int __init bl_idle_init(void)
if (ret)
goto out_uninit_little;
+ /* Start at index 1, index 0 standard WFI */
+ ret = dt_init_idle_driver(&bl_idle_big_driver, 1);
+ if (ret)
+ goto out_uninit_big;
+
+ /* Start at index 1, index 0 standard WFI */
+ ret = dt_init_idle_driver(&bl_idle_little_driver, 1);
+ if (ret)
+ goto out_uninit_big;
+
+ drv = &bl_idle_big_driver;
+ for (i = 1; i < drv->state_count; i++)
+ drv->states[i].enter = bl_enter_powerdown;
+
+ drv = &bl_idle_little_driver;
+ for (i = 1; i < drv->state_count; i++)
+ drv->states[i].enter = bl_enter_powerdown;
+
ret = cpuidle_register(&bl_idle_little_driver, NULL);
if (ret)
goto out_uninit_big;
With the introduction of DT based idle states, CPUidle drivers for ARM can now initialize idle states data through properties in the device tree. This patch adds code to the big.LITTLE CPUidle driver to dynamically initialize idle states data through the updated device tree source file. Cc: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> --- arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 23 ++++++++++++++++ drivers/cpuidle/Kconfig.arm | 1 + drivers/cpuidle/cpuidle-big_little.c | 43 +++++++++++++++--------------- 3 files changed, 46 insertions(+), 21 deletions(-)