| Message ID | 1409710239-19941-3-git-send-email-caesar.wang@rock-chips.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Eduardo Valentin |
| Headers | show |
Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > This add the necessary binding documentation for the thermal > found on Rockchip SoCs > > Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > --- > .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > ++++++++++++++++++++ 1 file changed, 20 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new file > mode 100644 > index 0000000..1ed4d4c > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > @@ -0,0 +1,20 @@ > +* Temperature Sensor ADC (TSADC) on rockchip SoCs > + > +Required properties: > +- compatible: "rockchip,rk3288-tsadc" > +- reg: physical base address of the controller and length of memory mapped > + region. > +- interrupts: The interrupt number to the cpu. The interrupt specifier > format + depends on the interrupt controller. > +- clocks: Must contain an entry for each entry in clock-names. > +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for > + the peripheral clock. You're using the passive-temp, critical-temp and force-shut-temp properties in your driver without declaring them here. But more importantly, please use the generic trip-points for this. I guess it shouldn't be a problem to introduce a "forced-shutdown" trippoint [0] for the additional trip-point you have - thermal maintainers, please shout if I'm wrong :-) Heiko [0] in a separate patch, changing - thermal_trip_type enum in include/linux/thermal.h - trip_types mapping in drivers/thermal/of-thermal.c - Documentation/devicetree/bindings/thermal/thermal.txt > + > +Example: > +tsadc: tsadc@ff280000 { > + compatible = "rockchip,rk3288-tsadc"; > + reg = <0xff280000 0x100>; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; > + clock-names = "tsadc", "apb_pclk"; > +}; -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
? 2014?09?03? 16:07, Heiko Stübner ??: > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: >> This add the necessary binding documentation for the thermal >> found on Rockchip SoCs >> >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> >> --- >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt >> >> diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new file >> mode 100644 >> index 0000000..1ed4d4c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt >> @@ -0,0 +1,20 @@ >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs >> + >> +Required properties: >> +- compatible: "rockchip,rk3288-tsadc" >> +- reg: physical base address of the controller and length of memory mapped >> + region. >> +- interrupts: The interrupt number to the cpu. The interrupt specifier >> format + depends on the interrupt controller. >> +- clocks: Must contain an entry for each entry in clock-names. >> +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for >> + the peripheral clock. > You're using the passive-temp, critical-temp and force-shut-temp properties in > your driver without declaring them here. frankly,the about are need be declared. but there are 4 types[0] for trip in thermal framework, there is no force-shut for me. So I want to change it three additional properties in [PATCH V4 4/4], [0] { THERMAL_TRIP_CRITICAL, THERMAL_TRIP_HOT, THERMAL_TRIP_PASSIVE, THERMAL_TRIP_ACTIVE, } > But more importantly, please use the generic trip-points for this. I guess it > shouldn't be a problem to introduce a "forced-shutdown" trippoint [0] for the > additional trip-point you have - thermal maintainers, please shout if I'm > wrong :-) It's a good option. I can send a patch,but I don't know whether the thermal maintainers will accept it. Maybe,they have a better way to suggest it.:-) PS:I will sent a new patch If I still have no received their suggestions in two days. > > Heiko > > > [0] in a separate patch, changing > - thermal_trip_type enum in include/linux/thermal.h > - trip_types mapping in drivers/thermal/of-thermal.c > - Documentation/devicetree/bindings/thermal/thermal.txt > >> + >> +Example: >> +tsadc: tsadc@ff280000 { >> + compatible = "rockchip,rk3288-tsadc"; >> + reg = <0xff280000 0x100>; >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; >> + clock-names = "tsadc", "apb_pclk"; >> +}; > > >
On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > ? 2014?09?03? 16:07, Heiko Stübner ??: > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > >> This add the necessary binding documentation for the thermal > >> found on Rockchip SoCs > >> > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > >> --- > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > >> create mode 100644 > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > >> > >> diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new file > >> mode 100644 > >> index 0000000..1ed4d4c > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > >> @@ -0,0 +1,20 @@ > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > >> + > >> +Required properties: > >> +- compatible: "rockchip,rk3288-tsadc" > >> +- reg: physical base address of the controller and length of memory mapped > >> + region. > >> +- interrupts: The interrupt number to the cpu. The interrupt specifier > >> format + depends on the interrupt controller. > >> +- clocks: Must contain an entry for each entry in clock-names. > >> +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for > >> + the peripheral clock. > > You're using the passive-temp, critical-temp and force-shut-temp properties in > > your driver without declaring them here. > > frankly,the about are need be declared. but there are 4 types[0] for > trip in thermal framework, > there is no force-shut for me. So I want to change it three additional > properties in [PATCH V4 4/4], > > > [0] > { > THERMAL_TRIP_CRITICAL, > THERMAL_TRIP_HOT, > THERMAL_TRIP_PASSIVE, > THERMAL_TRIP_ACTIVE, > } > this sounds reasonable to me. > > But more importantly, please use the generic trip-points for this. I guess it > > shouldn't be a problem to introduce a "forced-shutdown" trippoint [0] for the > > additional trip-point you have - thermal maintainers, please shout if I'm > > wrong :-) > what is the difference between a critical trip point and a "forced-shutdown" trip point? Thermal core will do a shutdown in case the critical trip point is triggered. thanks, rui > It's a good option. > I can send a patch,but I don't know whether the thermal maintainers will > accept it. > > Maybe,they have a better way to suggest it.:-) > > > PS:I will sent a new patch If I still have no received their suggestions > in two days. > > > > > Heiko > > > > > > [0] in a separate patch, changing > > - thermal_trip_type enum in include/linux/thermal.h > > - trip_types mapping in drivers/thermal/of-thermal.c > > - Documentation/devicetree/bindings/thermal/thermal.txt > > > >> + > >> +Example: > >> +tsadc: tsadc@ff280000 { > >> + compatible = "rockchip,rk3288-tsadc"; > >> + reg = <0xff280000 0x100>; > >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; > >> + clock-names = "tsadc", "apb_pclk"; > >> +}; > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > > ? 2014?09?03? 16:07, Heiko Stübner ??: > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > > >> This add the necessary binding documentation for the thermal > > >> found on Rockchip SoCs > > >> > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > > >> --- > > >> > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > > >> > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > > >> > > >> create mode 100644 > > >> > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > >> > > >> diff --git > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new > > >> file > > >> mode 100644 > > >> index 0000000..1ed4d4c > > >> --- /dev/null > > >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > >> @@ -0,0 +1,20 @@ > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > > >> + > > >> +Required properties: > > >> +- compatible: "rockchip,rk3288-tsadc" > > >> +- reg: physical base address of the controller and length of memory > > >> mapped > > >> + region. > > >> +- interrupts: The interrupt number to the cpu. The interrupt specifier > > >> format + depends on the interrupt controller. > > >> +- clocks: Must contain an entry for each entry in clock-names. > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and > > >> "apb_pclk" for + the peripheral clock. > > > > > > You're using the passive-temp, critical-temp and force-shut-temp > > > properties in your driver without declaring them here. > > > > frankly,the about are need be declared. but there are 4 types[0] for > > trip in thermal framework, > > there is no force-shut for me. So I want to change it three additional > > properties in [PATCH V4 4/4], > > > > > > [0] > > { > > > > THERMAL_TRIP_CRITICAL, > > THERMAL_TRIP_HOT, > > THERMAL_TRIP_PASSIVE, > > THERMAL_TRIP_ACTIVE, > > > > } > > this sounds reasonable to me. > > > > But more importantly, please use the generic trip-points for this. I > > > guess it shouldn't be a problem to introduce a "forced-shutdown" > > > trippoint [0] for the additional trip-point you have - thermal > > > maintainers, please shout if I'm wrong :-) > > what is the difference between a critical trip point and a > "forced-shutdown" trip point? > Thermal core will do a shutdown in case the critical trip point is > triggered. The forced-shutdown is where the thermal controller is supposed to also do a shutdown in hardware. As you said the thermal core will also shutdown at the critical trip point, I guess we could map Caesar's value like trip-point tsadc critical forced-shutdown (the 120 degrees in patch 4) hot critical (the 100 degrees) ... > > thanks, > rui > > > It's a good option. > > I can send a patch,but I don't know whether the thermal maintainers will > > accept it. > > > > Maybe,they have a better way to suggest it.:-) > > > > > > PS:I will sent a new patch If I still have no received their suggestions > > in two days. > > > > > Heiko > > > > > > > > > [0] in a separate patch, changing > > > - thermal_trip_type enum in include/linux/thermal.h > > > - trip_types mapping in drivers/thermal/of-thermal.c > > > - Documentation/devicetree/bindings/thermal/thermal.txt > > > > > >> + > > >> +Example: > > >> +tsadc: tsadc@ff280000 { > > >> + compatible = "rockchip,rk3288-tsadc"; > > >> + reg = <0xff280000 0x100>; > > >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > > >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; > > >> + clock-names = "tsadc", "apb_pclk"; > > >> +}; -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello On Tue, Sep 09, 2014 at 01:35:31PM +0200, Heiko Stübner wrote: > Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: > > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > > > ? 2014?09?03? 16:07, Heiko Stübner ??: > > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > > > >> This add the necessary binding documentation for the thermal > > > >> found on Rockchip SoCs > > > >> > > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > > > >> --- > > > >> > > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > > > >> > > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > > > >> > > > >> create mode 100644 > > > >> > > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > >> > > > >> diff --git > > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new > > > >> file > > > >> mode 100644 > > > >> index 0000000..1ed4d4c > > > >> --- /dev/null > > > >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > >> @@ -0,0 +1,20 @@ > > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > > > >> + > > > >> +Required properties: > > > >> +- compatible: "rockchip,rk3288-tsadc" > > > >> +- reg: physical base address of the controller and length of memory > > > >> mapped > > > >> + region. > > > >> +- interrupts: The interrupt number to the cpu. The interrupt specifier > > > >> format + depends on the interrupt controller. > > > >> +- clocks: Must contain an entry for each entry in clock-names. > > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and > > > >> "apb_pclk" for + the peripheral clock. > > > > > > > > You're using the passive-temp, critical-temp and force-shut-temp > > > > properties in your driver without declaring them here. > > > > > > frankly,the about are need be declared. but there are 4 types[0] for > > > trip in thermal framework, > > > there is no force-shut for me. So I want to change it three additional > > > properties in [PATCH V4 4/4], > > > > > > > > > [0] > > > { > > > > > > THERMAL_TRIP_CRITICAL, > > > THERMAL_TRIP_HOT, > > > THERMAL_TRIP_PASSIVE, > > > THERMAL_TRIP_ACTIVE, > > > > > > } > > > > this sounds reasonable to me. > > > > > > But more importantly, please use the generic trip-points for this. I > > > > guess it shouldn't be a problem to introduce a "forced-shutdown" > > > > trippoint [0] for the additional trip-point you have - thermal > > > > maintainers, please shout if I'm wrong :-) > > > > what is the difference between a critical trip point and a > > "forced-shutdown" trip point? > > Thermal core will do a shutdown in case the critical trip point is > > triggered. > > The forced-shutdown is where the thermal controller is supposed to also do a Currently, there is no discrimination between hardware configured / triggered thermal shutdown and software detected / triggered thermal shutdown. One way to implement it though is to reuse the critical trip type. Even if you use more than one trip type it is doable, it will depend on the priorities you give to software triggered and hardware triggered. > shutdown in hardware. As you said the thermal core will also shutdown at the > critical trip point, I guess we could map Caesar's value like > > trip-point tsadc > critical forced-shutdown (the 120 degrees in patch 4) > hot critical (the 100 degrees) > ... > > In the case we are planing to expand the trip type range, adding one specific to hardware configurable shutdown makes sense to me too. Alhtough, as I mention, I believe with the current generic trip types, this situation can be covered already. Besides, I believe 'forced-shutdown' does not sound a descriptive enough though. I would suggest something more specific, say 'hardware-shutdown'. > > > > thanks, > > rui > > > > > It's a good option. > > > I can send a patch,but I don't know whether the thermal maintainers will > > > accept it. > > > > > > Maybe,they have a better way to suggest it.:-) > > > > > > > > > PS:I will sent a new patch If I still have no received their suggestions > > > in two days. > > > > > > > Heiko > > > > > > > > > > > > [0] in a separate patch, changing > > > > - thermal_trip_type enum in include/linux/thermal.h > > > > - trip_types mapping in drivers/thermal/of-thermal.c > > > > - Documentation/devicetree/bindings/thermal/thermal.txt > > > > > > > >> + > > > >> +Example: > > > >> +tsadc: tsadc@ff280000 { > > > >> + compatible = "rockchip,rk3288-tsadc"; > > > >> + reg = <0xff280000 0x100>; > > > >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > > > >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; > > > >> + clock-names = "tsadc", "apb_pclk"; > > > >> +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2014-09-09 at 11:09 -0400, Eduardo Valentin wrote: > Hello > > On Tue, Sep 09, 2014 at 01:35:31PM +0200, Heiko Stübner wrote: > > Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: > > > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > > > > ? 2014?09?03? 16:07, Heiko Stübner ??: > > > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > > > > >> This add the necessary binding documentation for the thermal > > > > >> found on Rockchip SoCs > > > > >> > > > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > > > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > > > > >> --- > > > > >> > > > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > > > > >> > > > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > > > > >> > > > > >> create mode 100644 > > > > >> > > > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > > >> > > > > >> diff --git > > > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new > > > > >> file > > > > >> mode 100644 > > > > >> index 0000000..1ed4d4c > > > > >> --- /dev/null > > > > >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > > >> @@ -0,0 +1,20 @@ > > > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > > > > >> + > > > > >> +Required properties: > > > > >> +- compatible: "rockchip,rk3288-tsadc" > > > > >> +- reg: physical base address of the controller and length of memory > > > > >> mapped > > > > >> + region. > > > > >> +- interrupts: The interrupt number to the cpu. The interrupt specifier > > > > >> format + depends on the interrupt controller. > > > > >> +- clocks: Must contain an entry for each entry in clock-names. > > > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and > > > > >> "apb_pclk" for + the peripheral clock. > > > > > > > > > > You're using the passive-temp, critical-temp and force-shut-temp > > > > > properties in your driver without declaring them here. > > > > > > > > frankly,the about are need be declared. but there are 4 types[0] for > > > > trip in thermal framework, > > > > there is no force-shut for me. So I want to change it three additional > > > > properties in [PATCH V4 4/4], > > > > > > > > > > > > [0] > > > > { > > > > > > > > THERMAL_TRIP_CRITICAL, > > > > THERMAL_TRIP_HOT, > > > > THERMAL_TRIP_PASSIVE, > > > > THERMAL_TRIP_ACTIVE, > > > > > > > > } > > > > > > this sounds reasonable to me. > > > > > > > > But more importantly, please use the generic trip-points for this. I > > > > > guess it shouldn't be a problem to introduce a "forced-shutdown" > > > > > trippoint [0] for the additional trip-point you have - thermal > > > > > maintainers, please shout if I'm wrong :-) > > > > > > what is the difference between a critical trip point and a > > > "forced-shutdown" trip point? > > > Thermal core will do a shutdown in case the critical trip point is > > > triggered. > > > > The forced-shutdown is where the thermal controller is supposed to also do a > > Currently, there is no discrimination between hardware configured / > triggered thermal shutdown and software detected / triggered thermal shutdown. > One way to implement it though is to reuse the critical trip type. Even > if you use more than one trip type it is doable, it will depend on the > priorities you give to software triggered and hardware triggered. > > > shutdown in hardware. As you said the thermal core will also shutdown at the > > critical trip point, I guess we could map Caesar's value like > > > > trip-point tsadc > > critical forced-shutdown (the 120 degrees in patch 4) > > > hot critical (the 100 degrees) > > ... > > > > > > In the case we are planing to expand the trip type range, adding one > specific to hardware configurable shutdown makes sense to me too. hmmm, why? you don't want an orderly shutdown? I still do not understand why we need a hardware shutdown trip point. Say, if we expect the system to be shutdown at 100C, I don't think we have a chance to trigger the hardware shutdown trip point. Further more, if my understanding is right, thermal core won't do anything for the hardware shutdown trip point because the system will be shutdown automatically, right? If this is true, why bother introducing this to thermal core? thanks, rui > Alhtough, as I mention, I believe with the current generic trip types, > this situation can be covered already. > Besides, I believe > 'forced-shutdown' does not sound a descriptive enough though. I would > suggest something more specific, say 'hardware-shutdown'. > > > > > > > thanks, > > > rui > > > > > > > It's a good option. > > > > I can send a patch,but I don't know whether the thermal maintainers will > > > > accept it. > > > > > > > > Maybe,they have a better way to suggest it.:-) > > > > > > > > > > > > PS:I will sent a new patch If I still have no received their suggestions > > > > in two days. > > > > > > > > > Heiko > > > > > > > > > > > > > > > [0] in a separate patch, changing > > > > > - thermal_trip_type enum in include/linux/thermal.h > > > > > - trip_types mapping in drivers/thermal/of-thermal.c > > > > > - Documentation/devicetree/bindings/thermal/thermal.txt > > > > > > > > > >> + > > > > >> +Example: > > > > >> +tsadc: tsadc@ff280000 { > > > > >> + compatible = "rockchip,rk3288-tsadc"; > > > > >> + reg = <0xff280000 0x100>; > > > > >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > > > > >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; > > > > >> + clock-names = "tsadc", "apb_pclk"; > > > > >> +}; > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On Tue, Sep 9, 2014 at 9:02 PM, Zhang Rui <rui.zhang@intel.com> wrote: > On Tue, 2014-09-09 at 11:09 -0400, Eduardo Valentin wrote: >> Hello >> >> On Tue, Sep 09, 2014 at 01:35:31PM +0200, Heiko Stübner wrote: >> > Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: >> > > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: >> > > > ? 2014?09?03? 16:07, Heiko Stübner ??: >> > > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: >> > > > >> This add the necessary binding documentation for the thermal >> > > > >> found on Rockchip SoCs >> > > > >> >> > > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> >> > > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> >> > > > >> --- >> > > > >> >> > > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 >> > > > >> >> > > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) >> > > > >> >> > > > >> create mode 100644 >> > > > >> >> > > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt >> > > > >> >> > > > >> diff --git >> > > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new >> > > > >> file >> > > > >> mode 100644 >> > > > >> index 0000000..1ed4d4c >> > > > >> --- /dev/null >> > > > >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt >> > > > >> @@ -0,0 +1,20 @@ >> > > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs >> > > > >> + >> > > > >> +Required properties: >> > > > >> +- compatible: "rockchip,rk3288-tsadc" >> > > > >> +- reg: physical base address of the controller and length of memory >> > > > >> mapped >> > > > >> + region. >> > > > >> +- interrupts: The interrupt number to the cpu. The interrupt specifier >> > > > >> format + depends on the interrupt controller. >> > > > >> +- clocks: Must contain an entry for each entry in clock-names. >> > > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and >> > > > >> "apb_pclk" for + the peripheral clock. >> > > > > >> > > > > You're using the passive-temp, critical-temp and force-shut-temp >> > > > > properties in your driver without declaring them here. >> > > > >> > > > frankly,the about are need be declared. but there are 4 types[0] for >> > > > trip in thermal framework, >> > > > there is no force-shut for me. So I want to change it three additional >> > > > properties in [PATCH V4 4/4], >> > > > >> > > > >> > > > [0] >> > > > { >> > > > >> > > > THERMAL_TRIP_CRITICAL, >> > > > THERMAL_TRIP_HOT, >> > > > THERMAL_TRIP_PASSIVE, >> > > > THERMAL_TRIP_ACTIVE, >> > > > >> > > > } >> > > >> > > this sounds reasonable to me. >> > > >> > > > > But more importantly, please use the generic trip-points for this. I >> > > > > guess it shouldn't be a problem to introduce a "forced-shutdown" >> > > > > trippoint [0] for the additional trip-point you have - thermal >> > > > > maintainers, please shout if I'm wrong :-) >> > > >> > > what is the difference between a critical trip point and a >> > > "forced-shutdown" trip point? >> > > Thermal core will do a shutdown in case the critical trip point is >> > > triggered. >> > >> > The forced-shutdown is where the thermal controller is supposed to also do a >> >> Currently, there is no discrimination between hardware configured / >> triggered thermal shutdown and software detected / triggered thermal shutdown. >> One way to implement it though is to reuse the critical trip type. Even >> if you use more than one trip type it is doable, it will depend on the >> priorities you give to software triggered and hardware triggered. >> >> > shutdown in hardware. As you said the thermal core will also shutdown at the >> > critical trip point, I guess we could map Caesar's value like >> > >> > trip-point tsadc >> > critical forced-shutdown (the 120 degrees in patch 4) >> >> > hot critical (the 100 degrees) >> > ... >> > >> > >> >> In the case we are planing to expand the trip type range, adding one >> specific to hardware configurable shutdown makes sense to me too. > hmmm, why? you don't want an orderly shutdown? I still do not understand > why we need a hardware shutdown trip point. > Say, if we expect the system to be shutdown at 100C, I don't think we > have a chance to trigger the hardware shutdown trip point. > Further more, if my understanding is right, thermal core won't do > anything for the hardware shutdown trip point because the system will be > shutdown automatically, right? If this is true, why bother introducing > this to thermal core? > Some ICs allow configuring the temperature when the shutdown will happen. That is, you setup in registers the thermal shutdown threshold, and one of the output pin of the IC is wired to, say, the processor reset pin. Some other ICs have the threshold hardwired, and cannot be configured. Those options are a last chance to avoid processors to burn, in case software really gets stuck at high temperatures. The only thing that the thermal driver would need to worry is the configuration step, that is, writing the value to the registers. In the case the thermal core would have a specific trip type for such case, the core itself would not do anything, except allowing designing a thermal zone with hardware shutdown trips. And thus the thermal driver would do the configuration. Currently, the way I see to implement this is to interpret critical trips as the threshold to be configured at the IC registers. That is, reusing critical trips as orderly power down and as the hardware shutdown threshold. > thanks, > rui >> Alhtough, as I mention, I believe with the current generic trip types, >> this situation can be covered already. >> Besides, I believe >> 'forced-shutdown' does not sound a descriptive enough though. I would >> suggest something more specific, say 'hardware-shutdown'. >> >> > > >> > > thanks, >> > > rui >> > > >> > > > It's a good option. >> > > > I can send a patch,but I don't know whether the thermal maintainers will >> > > > accept it. >> > > > >> > > > Maybe,they have a better way to suggest it.:-) >> > > > >> > > > >> > > > PS:I will sent a new patch If I still have no received their suggestions >> > > > in two days. >> > > > >> > > > > Heiko >> > > > > >> > > > > >> > > > > [0] in a separate patch, changing >> > > > > - thermal_trip_type enum in include/linux/thermal.h >> > > > > - trip_types mapping in drivers/thermal/of-thermal.c >> > > > > - Documentation/devicetree/bindings/thermal/thermal.txt >> > > > > >> > > > >> + >> > > > >> +Example: >> > > > >> +tsadc: tsadc@ff280000 { >> > > > >> + compatible = "rockchip,rk3288-tsadc"; >> > > > >> + reg = <0xff280000 0x100>; >> > > > >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; >> > > > >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; >> > > > >> + clock-names = "tsadc", "apb_pclk"; >> > > > >> +}; >> > >> > >
Am Dienstag, 9. September 2014, 21:14:18 schrieb edubezval@gmail.com: > Hello, > > On Tue, Sep 9, 2014 at 9:02 PM, Zhang Rui <rui.zhang@intel.com> wrote: > > On Tue, 2014-09-09 at 11:09 -0400, Eduardo Valentin wrote: > >> Hello > >> > >> On Tue, Sep 09, 2014 at 01:35:31PM +0200, Heiko Stübner wrote: > >> > Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: > >> > > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > >> > > > ? 2014?09?03? 16:07, Heiko Stübner ??: > >> > > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > >> > > > >> This add the necessary binding documentation for the thermal > >> > > > >> found on Rockchip SoCs > >> > > > >> > >> > > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > >> > > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > >> > > > >> --- > >> > > > >> > >> > > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > >> > > > >> > >> > > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > >> > > > >> > >> > > > >> create mode 100644 > >> > > > >> > >> > > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > >> > > > >> > >> > > > >> diff --git > >> > > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > >> > > > >> new > >> > > > >> file > >> > > > >> mode 100644 > >> > > > >> index 0000000..1ed4d4c > >> > > > >> --- /dev/null > >> > > > >> +++ > >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.tx > >> > > > >> t > >> > > > >> @@ -0,0 +1,20 @@ > >> > > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > >> > > > >> + > >> > > > >> +Required properties: > >> > > > >> +- compatible: "rockchip,rk3288-tsadc" > >> > > > >> +- reg: physical base address of the controller and length of > >> > > > >> memory > >> > > > >> mapped > >> > > > >> + region. > >> > > > >> +- interrupts: The interrupt number to the cpu. The interrupt > >> > > > >> specifier > >> > > > >> format + depends on the interrupt controller. > >> > > > >> +- clocks: Must contain an entry for each entry in clock-names. > >> > > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and > >> > > > >> "apb_pclk" for + the peripheral clock. > >> > > > > > >> > > > > You're using the passive-temp, critical-temp and force-shut-temp > >> > > > > properties in your driver without declaring them here. > >> > > > > >> > > > frankly,the about are need be declared. but there are 4 types[0] > >> > > > for > >> > > > trip in thermal framework, > >> > > > there is no force-shut for me. So I want to change it three > >> > > > additional > >> > > > properties in [PATCH V4 4/4], > >> > > > > >> > > > > >> > > > [0] > >> > > > { > >> > > > > >> > > > THERMAL_TRIP_CRITICAL, > >> > > > THERMAL_TRIP_HOT, > >> > > > THERMAL_TRIP_PASSIVE, > >> > > > THERMAL_TRIP_ACTIVE, > >> > > > > >> > > > } > >> > > > >> > > this sounds reasonable to me. > >> > > > >> > > > > But more importantly, please use the generic trip-points for > >> > > > > this. I > >> > > > > guess it shouldn't be a problem to introduce a "forced-shutdown" > >> > > > > trippoint [0] for the additional trip-point you have - thermal > >> > > > > maintainers, please shout if I'm wrong :-) > >> > > > >> > > what is the difference between a critical trip point and a > >> > > "forced-shutdown" trip point? > >> > > Thermal core will do a shutdown in case the critical trip point is > >> > > triggered. > >> > > >> > The forced-shutdown is where the thermal controller is supposed to also > >> > do a>> > >> Currently, there is no discrimination between hardware configured / > >> triggered thermal shutdown and software detected / triggered thermal > >> shutdown. One way to implement it though is to reuse the critical trip > >> type. Even if you use more than one trip type it is doable, it will > >> depend on the priorities you give to software triggered and hardware > >> triggered. > >> > >> > shutdown in hardware. As you said the thermal core will also shutdown > >> > at the critical trip point, I guess we could map Caesar's value like > >> > > >> > trip-point tsadc > >> > critical forced-shutdown (the 120 degrees in patch 4) > >> > > >> > hot critical (the 100 degrees) > >> > ... > >> > >> In the case we are planing to expand the trip type range, adding one > >> specific to hardware configurable shutdown makes sense to me too. > > > > hmmm, why? you don't want an orderly shutdown? I still do not understand > > why we need a hardware shutdown trip point. > > Say, if we expect the system to be shutdown at 100C, I don't think we > > have a chance to trigger the hardware shutdown trip point. > > Further more, if my understanding is right, thermal core won't do > > anything for the hardware shutdown trip point because the system will be > > shutdown automatically, right? If this is true, why bother introducing > > this to thermal core? > > Some ICs allow configuring the temperature when the shutdown will > happen. That is, you setup in registers the thermal shutdown > threshold, and one of the output pin of the IC is wired to, say, the > processor reset pin. Some other ICs have the threshold hardwired, and > cannot be configured. > > Those options are a last chance to avoid processors to burn, in case > software really gets stuck at high temperatures. > > The only thing that the thermal driver would need to worry is the > configuration step, that is, writing the value to the registers. In > the case the thermal core would have a specific trip type for such > case, the core itself would not do anything, except allowing designing > a thermal zone with hardware shutdown trips. And thus the thermal > driver would do the configuration. > > > Currently, the way I see to implement this is to interpret critical > trips as the threshold to be configured at the IC registers. That is, > reusing critical trips as orderly power down and as the hardware > shutdown threshold. which was what I also meant to express above [but seemingly failed to do properly :-) ]. Critical is specified as "Hardware not reliable", so I'd think it wouldn't matter how the hw is shut down (orderly/unorderly) as long as its done. -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2014-09-10 at 09:24 +0200, Heiko Stübner wrote: > Am Dienstag, 9. September 2014, 21:14:18 schrieb edubezval@gmail.com: > > Hello, > > > > On Tue, Sep 9, 2014 at 9:02 PM, Zhang Rui <rui.zhang@intel.com> wrote: > > > On Tue, 2014-09-09 at 11:09 -0400, Eduardo Valentin wrote: > > >> Hello > > >> > > >> On Tue, Sep 09, 2014 at 01:35:31PM +0200, Heiko Stübner wrote: > > >> > Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: > > >> > > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > > >> > > > ? 2014?09?03? 16:07, Heiko Stübner ??: > > >> > > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > > >> > > > >> This add the necessary binding documentation for the thermal > > >> > > > >> found on Rockchip SoCs > > >> > > > >> > > >> > > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > > >> > > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > > >> > > > >> --- > > >> > > > >> > > >> > > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > > >> > > > >> > > >> > > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > > >> > > > >> > > >> > > > >> create mode 100644 > > >> > > > >> > > >> > > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > >> > > > >> > > >> > > > >> diff --git > > >> > > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > >> > > > >> new > > >> > > > >> file > > >> > > > >> mode 100644 > > >> > > > >> index 0000000..1ed4d4c > > >> > > > >> --- /dev/null > > >> > > > >> +++ > > >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.tx > > >> > > > >> t > > >> > > > >> @@ -0,0 +1,20 @@ > > >> > > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > > >> > > > >> + > > >> > > > >> +Required properties: > > >> > > > >> +- compatible: "rockchip,rk3288-tsadc" > > >> > > > >> +- reg: physical base address of the controller and length of > > >> > > > >> memory > > >> > > > >> mapped > > >> > > > >> + region. > > >> > > > >> +- interrupts: The interrupt number to the cpu. The interrupt > > >> > > > >> specifier > > >> > > > >> format + depends on the interrupt controller. > > >> > > > >> +- clocks: Must contain an entry for each entry in clock-names. > > >> > > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and > > >> > > > >> "apb_pclk" for + the peripheral clock. > > >> > > > > > > >> > > > > You're using the passive-temp, critical-temp and force-shut-temp > > >> > > > > properties in your driver without declaring them here. > > >> > > > > > >> > > > frankly,the about are need be declared. but there are 4 types[0] > > >> > > > for > > >> > > > trip in thermal framework, > > >> > > > there is no force-shut for me. So I want to change it three > > >> > > > additional > > >> > > > properties in [PATCH V4 4/4], > > >> > > > > > >> > > > > > >> > > > [0] > > >> > > > { > > >> > > > > > >> > > > THERMAL_TRIP_CRITICAL, > > >> > > > THERMAL_TRIP_HOT, > > >> > > > THERMAL_TRIP_PASSIVE, > > >> > > > THERMAL_TRIP_ACTIVE, > > >> > > > > > >> > > > } > > >> > > > > >> > > this sounds reasonable to me. > > >> > > > > >> > > > > But more importantly, please use the generic trip-points for > > >> > > > > this. I > > >> > > > > guess it shouldn't be a problem to introduce a "forced-shutdown" > > >> > > > > trippoint [0] for the additional trip-point you have - thermal > > >> > > > > maintainers, please shout if I'm wrong :-) > > >> > > > > >> > > what is the difference between a critical trip point and a > > >> > > "forced-shutdown" trip point? > > >> > > Thermal core will do a shutdown in case the critical trip point is > > >> > > triggered. > > >> > > > >> > The forced-shutdown is where the thermal controller is supposed to also > > >> > do a>> > > >> Currently, there is no discrimination between hardware configured / > > >> triggered thermal shutdown and software detected / triggered thermal > > >> shutdown. One way to implement it though is to reuse the critical trip > > >> type. Even if you use more than one trip type it is doable, it will > > >> depend on the priorities you give to software triggered and hardware > > >> triggered. > > >> > > >> > shutdown in hardware. As you said the thermal core will also shutdown > > >> > at the critical trip point, I guess we could map Caesar's value like > > >> > > > >> > trip-point tsadc > > >> > critical forced-shutdown (the 120 degrees in patch 4) > > >> > > > >> > hot critical (the 100 degrees) > > >> > ... > > >> > > >> In the case we are planing to expand the trip type range, adding one > > >> specific to hardware configurable shutdown makes sense to me too. > > > > > > hmmm, why? you don't want an orderly shutdown? I still do not understand > > > why we need a hardware shutdown trip point. > > > Say, if we expect the system to be shutdown at 100C, I don't think we > > > have a chance to trigger the hardware shutdown trip point. > > > Further more, if my understanding is right, thermal core won't do > > > anything for the hardware shutdown trip point because the system will be > > > shutdown automatically, right? If this is true, why bother introducing > > > this to thermal core? > > > > Some ICs allow configuring the temperature when the shutdown will > > happen. That is, you setup in registers the thermal shutdown > > threshold, and one of the output pin of the IC is wired to, say, the > > processor reset pin. Some other ICs have the threshold hardwired, and > > cannot be configured. > > > > Those options are a last chance to avoid processors to burn, in case > > software really gets stuck at high temperatures. > > > > The only thing that the thermal driver would need to worry is the > > configuration step, that is, writing the value to the registers. In > > the case the thermal core would have a specific trip type for such > > case, the core itself would not do anything, except allowing designing > > a thermal zone with hardware shutdown trips. And thus the thermal > > driver would do the configuration. > > > > > > Currently, the way I see to implement this is to interpret critical > > trips as the threshold to be configured at the IC registers. That is, > > reusing critical trips as orderly power down and as the hardware > > shutdown threshold. > > which was what I also meant to express above [but seemingly failed to do > properly :-) ]. > > Critical is specified as "Hardware not reliable", so I'd think it wouldn't > matter how the hw is shut down (orderly/unorderly) as long as its done. Hmmm, As what we want is to make thermal driver have a chance to configure the hardware shutdown registers, I'm thinking if we can do this without representing the hardware shutdown value as a trip point. Say, 1. parse DT, and get the hardware shutdown temperature value, and store it somewhere, e.g. struct __thermal_zone. 2. introduce a new parameter, int (*set_hardware_trip)(void *, long *), in thermal_zone_of_sensor_register(). 3. invoke set_hard_trip(tz, hardware_shutdown_temperature_value) in thermal_zone_of_sensor_register(). thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Rui, On Thu, Sep 11, 2014 at 10:36:52AM +0800, Zhang Rui wrote: > On Wed, 2014-09-10 at 09:24 +0200, Heiko Stübner wrote: > > Am Dienstag, 9. September 2014, 21:14:18 schrieb edubezval@gmail.com: > > > Hello, > > > > > > On Tue, Sep 9, 2014 at 9:02 PM, Zhang Rui <rui.zhang@intel.com> wrote: > > > > On Tue, 2014-09-09 at 11:09 -0400, Eduardo Valentin wrote: > > > >> Hello > > > >> > > > >> On Tue, Sep 09, 2014 at 01:35:31PM +0200, Heiko Stübner wrote: > > > >> > Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui: > > > >> > > On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote: > > > >> > > > ? 2014?09?03? 16:07, Heiko Stübner ??: > > > >> > > > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang: > > > >> > > > >> This add the necessary binding documentation for the thermal > > > >> > > > >> found on Rockchip SoCs > > > >> > > > >> > > > >> > > > >> Signed-off-by: zhaoyifeng <zyf@rock-chips.com> > > > >> > > > >> Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > > > >> > > > >> --- > > > >> > > > >> > > > >> > > > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20 > > > >> > > > >> > > > >> > > > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+) > > > >> > > > >> > > > >> > > > >> create mode 100644 > > > >> > > > >> > > > >> > > > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > >> > > > >> > > > >> > > > >> diff --git > > > >> > > > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt > > > >> > > > >> new > > > >> > > > >> file > > > >> > > > >> mode 100644 > > > >> > > > >> index 0000000..1ed4d4c > > > >> > > > >> --- /dev/null > > > >> > > > >> +++ > > > >> > > > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.tx > > > >> > > > >> t > > > >> > > > >> @@ -0,0 +1,20 @@ > > > >> > > > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs > > > >> > > > >> + > > > >> > > > >> +Required properties: > > > >> > > > >> +- compatible: "rockchip,rk3288-tsadc" > > > >> > > > >> +- reg: physical base address of the controller and length of > > > >> > > > >> memory > > > >> > > > >> mapped > > > >> > > > >> + region. > > > >> > > > >> +- interrupts: The interrupt number to the cpu. The interrupt > > > >> > > > >> specifier > > > >> > > > >> format + depends on the interrupt controller. > > > >> > > > >> +- clocks: Must contain an entry for each entry in clock-names. > > > >> > > > >> +- clock-names: Shall be "tsadc" for the converter-clock, and > > > >> > > > >> "apb_pclk" for + the peripheral clock. > > > >> > > > > > > > >> > > > > You're using the passive-temp, critical-temp and force-shut-temp > > > >> > > > > properties in your driver without declaring them here. > > > >> > > > > > > >> > > > frankly,the about are need be declared. but there are 4 types[0] > > > >> > > > for > > > >> > > > trip in thermal framework, > > > >> > > > there is no force-shut for me. So I want to change it three > > > >> > > > additional > > > >> > > > properties in [PATCH V4 4/4], > > > >> > > > > > > >> > > > > > > >> > > > [0] > > > >> > > > { > > > >> > > > > > > >> > > > THERMAL_TRIP_CRITICAL, > > > >> > > > THERMAL_TRIP_HOT, > > > >> > > > THERMAL_TRIP_PASSIVE, > > > >> > > > THERMAL_TRIP_ACTIVE, > > > >> > > > > > > >> > > > } > > > >> > > > > > >> > > this sounds reasonable to me. > > > >> > > > > > >> > > > > But more importantly, please use the generic trip-points for > > > >> > > > > this. I > > > >> > > > > guess it shouldn't be a problem to introduce a "forced-shutdown" > > > >> > > > > trippoint [0] for the additional trip-point you have - thermal > > > >> > > > > maintainers, please shout if I'm wrong :-) > > > >> > > > > > >> > > what is the difference between a critical trip point and a > > > >> > > "forced-shutdown" trip point? > > > >> > > Thermal core will do a shutdown in case the critical trip point is > > > >> > > triggered. > > > >> > > > > >> > The forced-shutdown is where the thermal controller is supposed to also > > > >> > do a>> > > > >> Currently, there is no discrimination between hardware configured / > > > >> triggered thermal shutdown and software detected / triggered thermal > > > >> shutdown. One way to implement it though is to reuse the critical trip > > > >> type. Even if you use more than one trip type it is doable, it will > > > >> depend on the priorities you give to software triggered and hardware > > > >> triggered. > > > >> > > > >> > shutdown in hardware. As you said the thermal core will also shutdown > > > >> > at the critical trip point, I guess we could map Caesar's value like > > > >> > > > > >> > trip-point tsadc > > > >> > critical forced-shutdown (the 120 degrees in patch 4) > > > >> > > > > >> > hot critical (the 100 degrees) > > > >> > ... > > > >> > > > >> In the case we are planing to expand the trip type range, adding one > > > >> specific to hardware configurable shutdown makes sense to me too. > > > > > > > > hmmm, why? you don't want an orderly shutdown? I still do not understand > > > > why we need a hardware shutdown trip point. > > > > Say, if we expect the system to be shutdown at 100C, I don't think we > > > > have a chance to trigger the hardware shutdown trip point. > > > > Further more, if my understanding is right, thermal core won't do > > > > anything for the hardware shutdown trip point because the system will be > > > > shutdown automatically, right? If this is true, why bother introducing > > > > this to thermal core? > > > > > > Some ICs allow configuring the temperature when the shutdown will > > > happen. That is, you setup in registers the thermal shutdown > > > threshold, and one of the output pin of the IC is wired to, say, the > > > processor reset pin. Some other ICs have the threshold hardwired, and > > > cannot be configured. > > > > > > Those options are a last chance to avoid processors to burn, in case > > > software really gets stuck at high temperatures. > > > > > > The only thing that the thermal driver would need to worry is the > > > configuration step, that is, writing the value to the registers. In > > > the case the thermal core would have a specific trip type for such > > > case, the core itself would not do anything, except allowing designing > > > a thermal zone with hardware shutdown trips. And thus the thermal > > > driver would do the configuration. > > > > > > > > > Currently, the way I see to implement this is to interpret critical > > > trips as the threshold to be configured at the IC registers. That is, > > > reusing critical trips as orderly power down and as the hardware > > > shutdown threshold. > > > > which was what I also meant to express above [but seemingly failed to do > > properly :-) ]. > > > > Critical is specified as "Hardware not reliable", so I'd think it wouldn't > > matter how the hw is shut down (orderly/unorderly) as long as its done. > > Hmmm, > > As what we want is to make thermal driver have a chance to configure the > hardware shutdown registers, I'm thinking if we can do this without > representing the hardware shutdown value as a trip point. > Say, > 1. parse DT, and get the hardware shutdown temperature value, and store > it somewhere, e.g. struct __thermal_zone. > 2. introduce a new parameter, int (*set_hardware_trip)(void *, long *), > in thermal_zone_of_sensor_register(). > 3. invoke set_hard_trip(tz, hardware_shutdown_temperature_value) in > thermal_zone_of_sensor_register(). The only issue I have with the above proposal is that not all platforms use DT. Some still boot with boardfiles, for instance. Thus, the parameter to configure hardware thermal shutdown needs to be common on thermal core, not specific to of-thermal. Do you agree? > > thanks, > rui > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 11 September 2014 08:18:43 Eduardo Valentin wrote: > > As what we want is to make thermal driver have a chance to configure the > > hardware shutdown registers, I'm thinking if we can do this without > > representing the hardware shutdown value as a trip point. > > Say, > > 1. parse DT, and get the hardware shutdown temperature value, and store > > it somewhere, e.g. struct __thermal_zone. > > 2. introduce a new parameter, int (*set_hardware_trip)(void *, long *), > > in thermal_zone_of_sensor_register(). > > 3. invoke set_hard_trip(tz, hardware_shutdown_temperature_value) in > > thermal_zone_of_sensor_register(). > > The only issue I have with the above proposal is that not all platforms > use DT. Some still boot with boardfiles, for instance. Thus, the > parameter to configure hardware thermal shutdown needs to be common on > thermal core, not specific to of-thermal. Do you agree? Do you know of a machine that can't yet be converted to DT and that needs this driver? In case of rockchips that is certainly not the case, and we don't care about anybody trying to use board files out of tree, they can just hack the thermal support as well. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Arnd, On Thu, Sep 11, 2014 at 02:32:08PM +0200, Arnd Bergmann wrote: > On Thursday 11 September 2014 08:18:43 Eduardo Valentin wrote: > > > As what we want is to make thermal driver have a chance to configure the > > > hardware shutdown registers, I'm thinking if we can do this without > > > representing the hardware shutdown value as a trip point. > > > Say, > > > 1. parse DT, and get the hardware shutdown temperature value, and store > > > it somewhere, e.g. struct __thermal_zone. > > > 2. introduce a new parameter, int (*set_hardware_trip)(void *, long *), > > > in thermal_zone_of_sensor_register(). > > > 3. invoke set_hard_trip(tz, hardware_shutdown_temperature_value) in > > > thermal_zone_of_sensor_register(). > > > > The only issue I have with the above proposal is that not all platforms > > use DT. Some still boot with boardfiles, for instance. Thus, the > > parameter to configure hardware thermal shutdown needs to be common on > > thermal core, not specific to of-thermal. Do you agree? > > Do you know of a machine that can't yet be converted to DT and that > needs this driver? In case of rockchips that is certainly not the > case, and we don't care about anybody trying to use board files out > of tree, they can just hack the thermal support as well. I see. Again, the only concern I have is to produce thermal framework APIs that would be only in the of-thermal. My point is not specific to this patch, or this platform, but with a detail in the above proposal. While I agree to have a trip specific to configurable hardware triggered thermal shutdown, I just don't see why it needs to be a feature implemented only via of-thermal. It has to be properly defined in thermal core. The proposal of of-thermal is not to become a separate/competing thermal framework. > > Arnd Cheers, Eduardo -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2014-09-11 at 11:53 -0400, Eduardo Valentin wrote: > Arnd, > > On Thu, Sep 11, 2014 at 02:32:08PM +0200, Arnd Bergmann wrote: > > On Thursday 11 September 2014 08:18:43 Eduardo Valentin wrote: > > > > As what we want is to make thermal driver have a chance to configure the > > > > hardware shutdown registers, I'm thinking if we can do this without > > > > representing the hardware shutdown value as a trip point. > > > > Say, > > > > 1. parse DT, and get the hardware shutdown temperature value, and store > > > > it somewhere, e.g. struct __thermal_zone. > > > > 2. introduce a new parameter, int (*set_hardware_trip)(void *, long *), > > > > in thermal_zone_of_sensor_register(). > > > > 3. invoke set_hard_trip(tz, hardware_shutdown_temperature_value) in > > > > thermal_zone_of_sensor_register(). > > > > > > The only issue I have with the above proposal is that not all platforms > > > use DT. Some still boot with boardfiles, for instance. Thus, the > > > parameter to configure hardware thermal shutdown needs to be common on > > > thermal core, not specific to of-thermal. Do you agree? > > > > Do you know of a machine that can't yet be converted to DT and that > > needs this driver? In case of rockchips that is certainly not the > > case, and we don't care about anybody trying to use board files out > > of tree, they can just hack the thermal support as well. > > I see. Again, the only concern I have is to produce thermal framework APIs > that would be only in the of-thermal. My point is not specific to this > patch, or this platform, but with a detail in the above proposal. > > While I agree to have a trip specific to configurable hardware triggered > thermal shutdown, I just don't see why it needs to be a feature > implemented only via of-thermal. It has to be properly defined in > thermal core. > > The proposal of of-thermal is not to become a separate/competing thermal > framework. > Agreed. And I think we can have such feature in thermal core. But again I don't think we should represent it as an trip point. thanks, rui > > > > Arnd > > Cheers, > > Eduardo -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2014-09-11 at 11:53 -0400, Eduardo Valentin wrote: > Arnd, > > On Thu, Sep 11, 2014 at 02:32:08PM +0200, Arnd Bergmann wrote: > > On Thursday 11 September 2014 08:18:43 Eduardo Valentin wrote: > > > > As what we want is to make thermal driver have a chance to configure the > > > > hardware shutdown registers, I'm thinking if we can do this without > > > > representing the hardware shutdown value as a trip point. > > > > Say, > > > > 1. parse DT, and get the hardware shutdown temperature value, and store > > > > it somewhere, e.g. struct __thermal_zone. > > > > 2. introduce a new parameter, int (*set_hardware_trip)(void *, long *), > > > > in thermal_zone_of_sensor_register(). > > > > 3. invoke set_hard_trip(tz, hardware_shutdown_temperature_value) in > > > > thermal_zone_of_sensor_register(). > > > > > > The only issue I have with the above proposal is that not all platforms > > > use DT. Some still boot with boardfiles, for instance. Thus, the > > > parameter to configure hardware thermal shutdown needs to be common on > > > thermal core, not specific to of-thermal. Do you agree? > > > > Do you know of a machine that can't yet be converted to DT and that > > needs this driver? In case of rockchips that is certainly not the > > case, and we don't care about anybody trying to use board files out > > of tree, they can just hack the thermal support as well. > > I see. Again, the only concern I have is to produce thermal framework APIs > that would be only in the of-thermal. My point is not specific to this > patch, or this platform, but with a detail in the above proposal. > > While I agree to have a trip specific to configurable hardware triggered > thermal shutdown, I just don't see why it needs to be a feature > implemented only via of-thermal. It has to be properly defined in > thermal core. > > The proposal of of-thermal is not to become a separate/competing thermal > framework. > Agreed. And I think we can have such feature in thermal core. But again I don't think we should represent it as an trip point. Instead, we can have a separate parameter for thanks, rui > > > > Arnd > > Cheers, > > Eduardo -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new file mode 100644 index 0000000..1ed4d4c --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -0,0 +1,20 @@ +* Temperature Sensor ADC (TSADC) on rockchip SoCs + +Required properties: +- compatible: "rockchip,rk3288-tsadc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for + the peripheral clock. + +Example: +tsadc: tsadc@ff280000 { + compatible = "rockchip,rk3288-tsadc"; + reg = <0xff280000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; +};