diff mbox

[v9,3/5] ARM: dts: add RK3288 Thermal data

Message ID 1413012563-7690-4-git-send-email-caesar.wang@rock-chips.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Wang Caesar Oct. 11, 2014, 7:29 a.m. UTC
This patch changes a dtsi file to contain the thermal data
on RK3288 and later SoCs. This data will
enable a thermal shutdown over 125C.

Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
---
 arch/arm/boot/dts/rk3288-thermal.dtsi | 57 +++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3288-thermal.dtsi
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi
new file mode 100644
index 0000000..c68c090
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-thermal.dtsi
@@ -0,0 +1,57 @@ 
+/*
+ * Device Tree Source for RK3288 SoC thermal
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+reserve_thermal: reserve_thermal {
+	polling-delay-passive = <500>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor	ID */
+	thermal-sensors = <&tsadc	0>;
+
+};
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <500>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor	ID */
+	thermal-sensors = <&tsadc	1>;
+
+	trips {
+		cpu_alert0: cpu_alert0 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+};
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <500>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor	ID */
+	thermal-sensors = <&tsadc	2>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+};