@@ -29,6 +29,7 @@
#include <linux/sysfs.h>
#include <linux/cpu.h>
#include <linux/powercap.h>
+#include <asm/iosf_mbi.h>
#include <asm/processor.h>
#include <asm/cpu_device_id.h>
@@ -70,11 +71,6 @@
#define RAPL_PRIMITIVE_DERIVED BIT(1) /* not from raw data */
#define RAPL_PRIMITIVE_DUMMY BIT(2)
-/* scale RAPL units to avoid floating point math inside kernel */
-#define POWER_UNIT_SCALE (1000000)
-#define ENERGY_UNIT_SCALE (1000000)
-#define TIME_UNIT_SCALE (1000000)
-
#define TIME_WINDOW_MAX_MSEC 40000
#define TIME_WINDOW_MIN_MSEC 250
@@ -175,9 +171,9 @@ struct rapl_package {
unsigned int id; /* physical package/socket id */
unsigned int nr_domains;
unsigned long domain_map; /* bit map of active domains */
- unsigned int power_unit_divisor;
- unsigned int energy_unit_divisor;
- unsigned int time_unit_divisor;
+ unsigned int power_unit;
+ unsigned int energy_unit;
+ unsigned int time_unit;
struct rapl_domain *domains; /* array of domains, sized at runtime */
struct powercap_zone *power_zone; /* keep track of parent zone */
int nr_cpus; /* active cpus on the package, topology info is lost during
@@ -197,6 +193,9 @@ struct rapl_defaults {
};
static struct rapl_defaults *rapl_defaults;
+/* Sideband MBI registers */
+#define IOSF_CPU_POWER_BUDGET_CTL (0x2)
+
#define PACKAGE_PLN_INT_SAVED BIT(0)
#define MAX_PRIM_NAME (32)
@@ -348,23 +347,13 @@ static int find_nr_power_limit(struct rapl_domain *rd)
static int set_domain_enable(struct powercap_zone *power_zone, bool mode)
{
struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
- int nr_powerlimit;
if (rd->state & DOMAIN_STATE_BIOS_LOCKED)
return -EACCES;
+
get_online_cpus();
- nr_powerlimit = find_nr_power_limit(rd);
- /* here we activate/deactivate the hardware for power limiting */
rapl_write_data_raw(rd, PL1_ENABLE, mode);
- /* always enable clamp such that p-state can go below OS requested
- * range. power capping priority over guranteed frequency.
- */
- rapl_write_data_raw(rd, PL1_CLAMP, mode);
- /* some domains have pl2 */
- if (nr_powerlimit > 1) {
- rapl_write_data_raw(rd, PL2_ENABLE, mode);
- rapl_write_data_raw(rd, PL2_CLAMP, mode);
- }
+ rapl_defaults->set_floor_freq(rd, mode);
put_online_cpus();
return 0;
@@ -662,9 +651,7 @@ static void rapl_init_domains(struct rapl_package *rp)
static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
int to_raw)
{
- u64 divisor = 1;
- int scale = 1; /* scale to user friendly data without floating point */
- u64 f, y; /* fraction and exp. used for time unit */
+ u64 units = 1;
struct rapl_package *rp;
rp = find_package_by_id(package);
@@ -673,42 +660,24 @@ static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
switch (type) {
case POWER_UNIT:
- divisor = rp->power_unit_divisor;
- scale = POWER_UNIT_SCALE;
+ units = rp->power_unit;
break;
case ENERGY_UNIT:
- scale = ENERGY_UNIT_SCALE;
- divisor = rp->energy_unit_divisor;
+ units = rp->energy_unit;
break;
case TIME_UNIT:
- divisor = rp->time_unit_divisor;
- scale = TIME_UNIT_SCALE;
- /* special processing based on 2^Y*(1+F)/4 = val/divisor, refer
- * to Intel Software Developer's manual Vol. 3a, CH 14.7.4.
- */
- if (!to_raw) {
- f = (value & 0x60) >> 5;
- y = value & 0x1f;
- value = (1 << y) * (4 + f) * scale / 4;
- return div64_u64(value, divisor);
- } else {
- do_div(value, scale);
- value *= divisor;
- y = ilog2(value);
- f = div64_u64(4 * (value - (1 << y)), 1 << y);
- value = (y & 0x1f) | ((f & 0x3) << 5);
- return value;
- }
- break;
+ return rapl_defaults->compute_time_window(rp, value, to_raw);
case ARBITRARY_UNIT:
default:
return value;
};
if (to_raw)
- return div64_u64(value * divisor, scale);
- else
- return div64_u64(value * scale, divisor);
+ return div64_u64(value, units);
+
+ value *= units;
+
+ return value;
}
/* in the order of enum rapl_primitives */
@@ -842,12 +811,18 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
return 0;
}
-static const struct x86_cpu_id energy_unit_quirk_ids[] = {
- { X86_VENDOR_INTEL, 6, 0x37},/* Valleyview */
- {}
-};
-
-static int rapl_check_unit(struct rapl_package *rp, int cpu)
+/*
+ * Raw RAPL data stored in MSRs are in certain scales. We need to
+ * convert them into standard units based on the units reported in
+ * the RAPL unit MSRs. This is specific to CPUs as the method to
+ * calculate units differ on different CPUs.
+ * We convert the units to below format based on CPUs.
+ * i.e.
+ * energy unit: microJoules : Represented in microJoules by default
+ * power unit : microWatts : Represented in milliWatts by default
+ * time unit : microseconds: Represented in seconds by default
+ */
+static int rapl_check_unit_core(struct rapl_package *rp, int cpu)
{
u64 msr_val;
u32 value;
@@ -858,36 +833,47 @@ static int rapl_check_unit(struct rapl_package *rp, int cpu)
return -ENODEV;
}
- /* Raw RAPL data stored in MSRs are in certain scales. We need to
- * convert them into standard units based on the divisors reported in
- * the RAPL unit MSRs.
- * i.e.
- * energy unit: 1/enery_unit_divisor Joules
- * power unit: 1/power_unit_divisor Watts
- * time unit: 1/time_unit_divisor Seconds
- */
value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
- /* some CPUs have different way to calculate energy unit */
- if (x86_match_cpu(energy_unit_quirk_ids))
- rp->energy_unit_divisor = 1000000 / (1 << value);
- else
- rp->energy_unit_divisor = 1 << value;
+ rp->energy_unit = 1000000 / (1 << value);
value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
- rp->power_unit_divisor = 1 << value;
+ rp->power_unit = 1000000 / (1 << value);
value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
- rp->time_unit_divisor = 1 << value;
+ rp->time_unit = 1000000 / (1 << value);
- pr_debug("Physical package %d units: energy=%d, time=%d, power=%d\n",
- rp->id,
- rp->energy_unit_divisor,
- rp->time_unit_divisor,
- rp->power_unit_divisor);
+ pr_debug("Core CPU package %d energy=%duJ, time=%dus, power=%duW\n",
+ rp->id, rp->energy_unit, rp->time_unit, rp->power_unit);
return 0;
}
+static int rapl_check_unit_atom(struct rapl_package *rp, int cpu)
+{
+ u64 msr_val;
+ u32 value;
+
+ if (rdmsrl_safe_on_cpu(cpu, MSR_RAPL_POWER_UNIT, &msr_val)) {
+ pr_err("Failed to read power unit MSR 0x%x on CPU %d, exit.\n",
+ MSR_RAPL_POWER_UNIT, cpu);
+ return -ENODEV;
+ }
+ value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
+ rp->energy_unit = 1 << value;
+
+ value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
+ rp->power_unit = (1 << value) * 1000;
+
+ value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
+ rp->time_unit = 1000000 / (1 << value);
+
+ pr_debug("Atom package %d energy=%duJ, time=%dus, power=%duW\n",
+ rp->id, rp->energy_unit, rp->time_unit, rp->power_unit);
+
+ return 0;
+}
+
+
/* REVISIT:
* When package power limit is set artificially low by RAPL, LVT
* thermal interrupt for package power limit should be ignored
@@ -955,10 +941,86 @@ static void package_power_limit_irq_restore(int package_id)
wrmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
}
+static void set_floor_freq_default(struct rapl_domain *rd, bool mode)
+{
+ int nr_powerlimit = find_nr_power_limit(rd);
+
+ /* always enable clamp such that p-state can go below OS requested
+ * range. power capping priority over guranteed frequency.
+ */
+ rapl_write_data_raw(rd, PL1_CLAMP, mode);
+
+ /* some domains have pl2 */
+ if (nr_powerlimit > 1) {
+ rapl_write_data_raw(rd, PL2_ENABLE, mode);
+ rapl_write_data_raw(rd, PL2_CLAMP, mode);
+ }
+}
+
+static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
+{
+ static u32 power_ctrl_orig_val;
+ u32 mdata;
+
+ if (!power_ctrl_orig_val)
+ iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_PMC_READ,
+ IOSF_CPU_POWER_BUDGET_CTL, &power_ctrl_orig_val);
+ mdata = power_ctrl_orig_val;
+ if (enable) {
+ mdata &= ~(0x7f << 8);
+ mdata |= 1 << 8;
+ }
+ iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_PMC_WRITE,
+ IOSF_CPU_POWER_BUDGET_CTL, mdata);
+}
+
+static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
+ bool to_raw)
+{
+ u64 f, y; /* fraction and exp. used for time unit */
+
+ /*
+ * Special processing based on 2^Y*(1+F/4), refer
+ * to Intel Software Developer's manual Vol.3B: CH 14.9.3.
+ */
+ if (!to_raw) {
+ f = (value & 0x60) >> 5;
+ y = value & 0x1f;
+ value = (1 << y) * (4 + f) * rp->time_unit / 4;
+ } else {
+ do_div(value, rp->time_unit);
+ y = ilog2(value);
+ f = div64_u64(4 * (value - (1 << y)), 1 << y);
+ value = (y & 0x1f) | ((f & 0x3) << 5);
+ }
+ return value;
+}
+
+static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value,
+ bool to_raw)
+{
+ /*
+ * Atom time unit encoding is straight forward val * time_unit,
+ * where time_unit is default to 1 sec. Never 0.
+ */
+ if (!to_raw)
+ return (value) ? value *= rp->time_unit : rp->time_unit;
+ else
+ value /= rp->time_unit;
+
+ return value;
+}
+
static const struct rapl_defaults rapl_defaults_core = {
+ .check_unit = rapl_check_unit_core,
+ .set_floor_freq = set_floor_freq_default,
+ .compute_time_window = rapl_compute_time_window_core,
};
static const struct rapl_defaults rapl_defaults_atom = {
+ .check_unit = rapl_check_unit_atom,
+ .set_floor_freq = set_floor_freq_atom,
+ .compute_time_window = rapl_compute_time_window_atom,
};
#define RAPL_CPU(_model, _ops) { \
@@ -1262,7 +1324,7 @@ static int rapl_detect_topology(void)
/* check if the package contains valid domains */
if (rapl_detect_domains(new_package, i) ||
- rapl_check_unit(new_package, i)) {
+ rapl_defaults->check_unit(new_package, i)) {
kfree(new_package->domains);
kfree(new_package);
/* free up the packages already initialized */
@@ -1317,7 +1379,7 @@ static int rapl_add_package(int cpu)
rp->nr_cpus = 1;
/* check if the package contains valid domains */
if (rapl_detect_domains(rp, cpu) ||
- rapl_check_unit(rp, cpu)) {
+ rapl_defaults->check_unit(rp, cpu)) {
ret = -ENODEV;
goto err_free_package;
}