diff mbox

[v2,11/33] thermal: exynos: replace tmu_pmin check by Exynos5440 one

Message ID 1415890888-8881-12-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State Accepted
Delegated to: Eduardo Valentin
Headers show

Commit Message

Bartlomiej Zolnierkiewicz Nov. 13, 2014, 3:01 p.m. UTC 
reg->tmu_pmin is set to non-zero value only for Exynos5440
so replace check for non-zero value of reg->tmu_pmin by
explicitly checking for Exynos5440 SoC type.  Then remove no
longer needed reg->tmu_pmin register abstraction.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c      | 4 ++--
 drivers/thermal/samsung/exynos_tmu.h      | 3 ---
 drivers/thermal/samsung/exynos_tmu_data.c | 1 -
 3 files changed, 2 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 839b07b..411c465 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -271,8 +271,8 @@  static int exynos_tmu_initialize(struct platform_device *pdev)
 		}
 	}
 	/*Clear the PMIN in the common TMU register*/
-	if (reg->tmu_pmin && !data->id)
-		writel(0, data->base_second + reg->tmu_pmin);
+	if (data->soc == SOC_ARCH_EXYNOS5440 && !data->id)
+		writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
 out:
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 5c2cef1..e8510aa 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -92,7 +92,6 @@  enum soc_type {
  * @tmu_intstat: Register containing the interrupt status values.
  * @tmu_intclear: Register for clearing the raised interrupt status.
  * @emul_con: TMU emulation controller register.
- * @tmu_pmin: register to get/set the Pmin value.
  */
 struct exynos_tmu_registers {
 	u32	tmu_ctrl;
@@ -116,8 +115,6 @@  struct exynos_tmu_registers {
 	u32	tmu_intclear;
 
 	u32	emul_con;
-
-	u32	tmu_pmin;
 };
 
 /**
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 557b4a5..fe063d4 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -402,7 +402,6 @@  static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
 	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
 	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
-	.tmu_pmin = EXYNOS5440_TMU_PMIN,
 };
 
 #define EXYNOS5440_TMU_DATA \