@@ -476,7 +476,7 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
struct exynos_tmu_platform_data *pdata = data->pdata;
int ret = -EINVAL;
- if (!TMU_SUPPORTS(pdata, EMULATION))
+ if (data->soc == SOC_ARCH_EXYNOS4210)
goto out;
if (temp && temp < MCELSIUS)
@@ -47,17 +47,14 @@ enum soc_type {
/**
* EXYNOS TMU supported features.
- * TMU_SUPPORT_EMULATION - This features is used to set user defined
- * temperature to the TMU controller.
* TMU_SUPPORT_MULTI_INST - This features denotes that the soc
* has many instances of TMU.
* TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
* sensors shares some common registers.
* TMU_SUPPORT - macro to compare the above features with the supplied.
*/
-#define TMU_SUPPORT_EMULATION BIT(0)
-#define TMU_SUPPORT_MULTI_INST BIT(1)
-#define TMU_SUPPORT_ADDRESS_MULTIPLE BIT(2)
+#define TMU_SUPPORT_MULTI_INST BIT(0)
+#define TMU_SUPPORT_ADDRESS_MULTIPLE BIT(1)
#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)
@@ -100,8 +100,7 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
.freq_clip_max = 400 * 1000, \
.temp_level = 95, \
}, \
- .freq_tab_count = 2, \
- .features = TMU_SUPPORT_EMULATION
+ .freq_tab_count = 2
#endif
#if defined(CONFIG_SOC_EXYNOS3250)
@@ -152,8 +151,7 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
.freq_clip_max = 400 * 1000, \
.temp_level = 95, \
}, \
- .freq_tab_count = 2, \
- .features = TMU_SUPPORT_EMULATION
+ .freq_tab_count = 2
#endif
#if defined(CONFIG_SOC_EXYNOS4412)
@@ -220,8 +218,7 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
#define EXYNOS5260_TMU_DATA \
__EXYNOS5260_TMU_DATA \
- .type = SOC_ARCH_EXYNOS5260, \
- .features = TMU_SUPPORT_EMULATION
+ .type = SOC_ARCH_EXYNOS5260
struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
.tmu_data = {
@@ -274,13 +271,12 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
#define EXYNOS5420_TMU_DATA \
__EXYNOS5420_TMU_DATA \
- .type = SOC_ARCH_EXYNOS5420, \
- .features = TMU_SUPPORT_EMULATION
+ .type = SOC_ARCH_EXYNOS5420
#define EXYNOS5420_TMU_DATA_SHARED \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_ADDRESS_MULTIPLE)
+ .features = TMU_SUPPORT_ADDRESS_MULTIPLE
struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.tmu_data = {
@@ -314,8 +310,7 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.second_point_trim = 70, \
.default_temp_offset = 25, \
.type = SOC_ARCH_EXYNOS5440, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_MULTI_INST | \
- TMU_SUPPORT_ADDRESS_MULTIPLE),
+ .features = (TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_ADDRESS_MULTIPLE),
struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
.tmu_data = {