Message ID | 1419265668-32283-2-git-send-email-l.majewski@samsung.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Eduardo Valentin |
Headers | show |
On Mon, Dec 22, 2014 at 05:27:41PM +0100, Lukasz Majewski wrote: > Odroid U3 fan can work without being registered as OF cooling device > (with CONFIG_THERMAL_OF disabled). > In this situation it can be controlled via PWM entry at > /sys/class/hwmon/hwmon0/pwm1. > > Therefore, the thermal_of_cooling_device_register() function needs a stub > to allow clean compilation. > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> > --- > Changes for v2: > - None > --- > include/linux/thermal.h | 14 +++++++++++--- > 1 file changed, 11 insertions(+), 3 deletions(-) > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index 2de3d9e..871123c 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct device *dev, int id, void *data, > const struct thermal_zone_of_device_ops *ops); > void thermal_zone_of_sensor_unregister(struct device *dev, > struct thermal_zone_device *tz); > +struct thermal_cooling_device * > +thermal_of_cooling_device_register(struct device_node *np, > + char *type, void *devdata, > + const struct thermal_cooling_device_ops *); > #else > static inline struct thermal_zone_device * > thermal_zone_of_sensor_register(struct device *dev, int id, void *data, > @@ -342,6 +346,13 @@ void thermal_zone_of_sensor_unregister(struct device *dev, > { > } > > +static inline struct thermal_cooling_device * > +thermal_of_cooling_device_register(struct device_node *np, > + char *type, void *devdata, > + const struct thermal_cooling_device_ops *ops) > +{ > + return NULL; > +} > #endif > struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, > void *, struct thermal_zone_device_ops *, > @@ -357,9 +368,6 @@ void thermal_zone_device_update(struct thermal_zone_device *); > > struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, > const struct thermal_cooling_device_ops *); > -struct thermal_cooling_device * > -thermal_of_cooling_device_register(struct device_node *np, char *, void *, > - const struct thermal_cooling_device_ops *); > void thermal_cooling_device_unregister(struct thermal_cooling_device *); > struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); > int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp); > -- > 2.0.0.rc2 >
On Fri, Jan 02, 2015 at 02:54:28PM -0400, Eduardo Valentin wrote: > On Mon, Dec 22, 2014 at 05:27:41PM +0100, Lukasz Majewski wrote: > > Odroid U3 fan can work without being registered as OF cooling device > > (with CONFIG_THERMAL_OF disabled). > > In this situation it can be controlled via PWM entry at > > /sys/class/hwmon/hwmon0/pwm1. > > > > Therefore, the thermal_of_cooling_device_register() function needs a stub > > to allow clean compilation. > > > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> > > Acked-by: Eduardo Valentin <edubezval@gmail.com> Sorry, too fast, This is actually Nacked-by: Eduardo Valentin <edubezval@gmail.com> :-) I get this error: drivers/thermal/thermal_core.c:1210:1: error: redefinition of ‘thermal_of_cooling_device_register’ thermal_of_cooling_device_register(struct device_node *np, ^ In file included from drivers/thermal/thermal_core.c:34:0: include/linux/thermal.h:321:1: note: previous definition of ‘thermal_of_cooling_device_register’ was here thermal_of_cooling_device_register(struct device_node *np, ^ We provide the function in thermal core even if CONFIG_THERMAL_OF is not set. > > > --- > > Changes for v2: > > - None > > --- > > include/linux/thermal.h | 14 +++++++++++--- > > 1 file changed, 11 insertions(+), 3 deletions(-) > > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > index 2de3d9e..871123c 100644 > > --- a/include/linux/thermal.h > > +++ b/include/linux/thermal.h > > @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct device *dev, int id, void *data, > > const struct thermal_zone_of_device_ops *ops); > > void thermal_zone_of_sensor_unregister(struct device *dev, > > struct thermal_zone_device *tz); > > +struct thermal_cooling_device * > > +thermal_of_cooling_device_register(struct device_node *np, > > + char *type, void *devdata, > > + const struct thermal_cooling_device_ops *); > > #else > > static inline struct thermal_zone_device * > > thermal_zone_of_sensor_register(struct device *dev, int id, void *data, > > @@ -342,6 +346,13 @@ void thermal_zone_of_sensor_unregister(struct device *dev, > > { > > } > > > > +static inline struct thermal_cooling_device * > > +thermal_of_cooling_device_register(struct device_node *np, > > + char *type, void *devdata, > > + const struct thermal_cooling_device_ops *ops) > > +{ > > + return NULL; > > +} > > #endif > > struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, > > void *, struct thermal_zone_device_ops *, > > @@ -357,9 +368,6 @@ void thermal_zone_device_update(struct thermal_zone_device *); > > > > struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, > > const struct thermal_cooling_device_ops *); > > -struct thermal_cooling_device * > > -thermal_of_cooling_device_register(struct device_node *np, char *, void *, > > - const struct thermal_cooling_device_ops *); > > void thermal_cooling_device_unregister(struct thermal_cooling_device *); > > struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); > > int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp); > > -- > > 2.0.0.rc2 > >
Hi Eduardo, > On Fri, Jan 02, 2015 at 02:54:28PM -0400, Eduardo Valentin wrote: > > On Mon, Dec 22, 2014 at 05:27:41PM +0100, Lukasz Majewski wrote: > > > Odroid U3 fan can work without being registered as OF cooling > > > device (with CONFIG_THERMAL_OF disabled). > > > In this situation it can be controlled via PWM entry at > > > /sys/class/hwmon/hwmon0/pwm1. > > > > > > Therefore, the thermal_of_cooling_device_register() function > > > needs a stub to allow clean compilation. > > > > > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> > > > > Acked-by: Eduardo Valentin <edubezval@gmail.com> > > Sorry, too fast, > > This is actually > Nacked-by: Eduardo Valentin <edubezval@gmail.com> > > :-) > > I get this error: > drivers/thermal/thermal_core.c:1210:1: error: redefinition of > ‘thermal_of_cooling_device_register’ > thermal_of_cooling_device_register(struct device_node *np, > ^ > In file included from drivers/thermal/thermal_core.c:34:0: > include/linux/thermal.h:321:1: note: previous definition of > ‘thermal_of_cooling_device_register’ was here > thermal_of_cooling_device_register(struct device_node *np, > ^ > > > We provide the function in thermal core even if CONFIG_THERMAL_OF is > not set. Unfortunately the PWM fan subsystem can work perfectly fine without CONFIG_THERMAL. I think that it would be enough to make something like this in the ./include/linux/thermal.h: #ifdef CONFIG_THERMAL static inline struct thermal_cooling_device * thermal_of_cooling_device_register(struct device_node *np, char *type, void *devdata, const struct thermal_cooling_device_ops *ops) { return NULL; } #else [ already present declaration of thermal_of_cooling_device_register() ] #endif /* CONFIG_THERMAL */ > > > > > --- > > > Changes for v2: > > > - None > > > --- > > > include/linux/thermal.h | 14 +++++++++++--- > > > 1 file changed, 11 insertions(+), 3 deletions(-) > > > > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > > index 2de3d9e..871123c 100644 > > > --- a/include/linux/thermal.h > > > +++ b/include/linux/thermal.h > > > @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct > > > device *dev, int id, void *data, const struct > > > thermal_zone_of_device_ops *ops); void > > > thermal_zone_of_sensor_unregister(struct device *dev, struct > > > thermal_zone_device *tz); +struct thermal_cooling_device * > > > +thermal_of_cooling_device_register(struct device_node *np, > > > + char *type, void *devdata, > > > + const struct > > > thermal_cooling_device_ops *); #else > > > static inline struct thermal_zone_device * > > > thermal_zone_of_sensor_register(struct device *dev, int id, void > > > *data, @@ -342,6 +346,13 @@ void > > > thermal_zone_of_sensor_unregister(struct device *dev, { > > > } > > > > > > +static inline struct thermal_cooling_device * > > > +thermal_of_cooling_device_register(struct device_node *np, > > > + char *type, void *devdata, > > > + const struct > > > thermal_cooling_device_ops *ops) +{ > > > + return NULL; > > > +} > > > #endif > > > struct thermal_zone_device *thermal_zone_device_register(const > > > char *, int, int, void *, struct thermal_zone_device_ops *, > > > @@ -357,9 +368,6 @@ void thermal_zone_device_update(struct > > > thermal_zone_device *); > > > struct thermal_cooling_device > > > *thermal_cooling_device_register(char *, void *, const struct > > > thermal_cooling_device_ops *); -struct thermal_cooling_device * > > > -thermal_of_cooling_device_register(struct device_node *np, char > > > *, void *, > > > - const struct > > > thermal_cooling_device_ops *); void > > > thermal_cooling_device_unregister(struct thermal_cooling_device > > > *); struct thermal_zone_device > > > *thermal_zone_get_zone_by_name(const char *name); int > > > thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned > > > long *temp); -- 2.0.0.rc2 > > > > >
On Wed, Jan 14, 2015 at 04:01:06PM +0100, Lukasz Majewski wrote: > Hi Eduardo, > > > On Fri, Jan 02, 2015 at 02:54:28PM -0400, Eduardo Valentin wrote: > > > On Mon, Dec 22, 2014 at 05:27:41PM +0100, Lukasz Majewski wrote: > > > > Odroid U3 fan can work without being registered as OF cooling > > > > device (with CONFIG_THERMAL_OF disabled). > > > > In this situation it can be controlled via PWM entry at > > > > /sys/class/hwmon/hwmon0/pwm1. > > > > > > > > Therefore, the thermal_of_cooling_device_register() function > > > > needs a stub to allow clean compilation. > > > > > > > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> > > > > > > Acked-by: Eduardo Valentin <edubezval@gmail.com> > > > > Sorry, too fast, > > > > This is actually > > Nacked-by: Eduardo Valentin <edubezval@gmail.com> > > > > :-) > > > > I get this error: > > drivers/thermal/thermal_core.c:1210:1: error: redefinition of > > ‘thermal_of_cooling_device_register’ > > thermal_of_cooling_device_register(struct device_node *np, > > ^ > > In file included from drivers/thermal/thermal_core.c:34:0: > > include/linux/thermal.h:321:1: note: previous definition of > > ‘thermal_of_cooling_device_register’ was here > > thermal_of_cooling_device_register(struct device_node *np, > > ^ > > > > > > We provide the function in thermal core even if CONFIG_THERMAL_OF is > > not set. > > Unfortunately the PWM fan subsystem can work perfectly fine without > CONFIG_THERMAL. > Now I understand what you are trying to do. > I think that it would be enough to make something like this in > the ./include/linux/thermal.h: > > #ifdef CONFIG_THERMAL Well, I think it should be the opposite here: #ifndef CONFIG_THERMAL that is, if no config thermal, then you provide the stub not the other way around. > static inline struct thermal_cooling_device * > thermal_of_cooling_device_register(struct device_node > *np, char *type, void *devdata, > const struct > thermal_cooling_device_ops *ops) { > return NULL; > } > #else > [ already present declaration of > thermal_of_cooling_device_register() ] > #endif /* CONFIG_THERMAL */ > > > > > > > > > > --- > > > > Changes for v2: > > > > - None > > > > --- > > > > include/linux/thermal.h | 14 +++++++++++--- > > > > 1 file changed, 11 insertions(+), 3 deletions(-) > > > > > > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > > > index 2de3d9e..871123c 100644 > > > > --- a/include/linux/thermal.h > > > > +++ b/include/linux/thermal.h > > > > @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct > > > > device *dev, int id, void *data, const struct > > > > thermal_zone_of_device_ops *ops); void > > > > thermal_zone_of_sensor_unregister(struct device *dev, struct > > > > thermal_zone_device *tz); +struct thermal_cooling_device * > > > > +thermal_of_cooling_device_register(struct device_node *np, > > > > + char *type, void *devdata, > > > > + const struct > > > > thermal_cooling_device_ops *); #else > > > > static inline struct thermal_zone_device * > > > > thermal_zone_of_sensor_register(struct device *dev, int id, void > > > > *data, @@ -342,6 +346,13 @@ void > > > > thermal_zone_of_sensor_unregister(struct device *dev, { > > > > } > > > > > > > > +static inline struct thermal_cooling_device * > > > > +thermal_of_cooling_device_register(struct device_node *np, > > > > + char *type, void *devdata, > > > > + const struct > > > > thermal_cooling_device_ops *ops) +{ > > > > + return NULL; > > > > +} > > > > #endif > > > > struct thermal_zone_device *thermal_zone_device_register(const > > > > char *, int, int, void *, struct thermal_zone_device_ops *, > > > > @@ -357,9 +368,6 @@ void thermal_zone_device_update(struct > > > > thermal_zone_device *); > > > > struct thermal_cooling_device > > > > *thermal_cooling_device_register(char *, void *, const struct > > > > thermal_cooling_device_ops *); -struct thermal_cooling_device * > > > > -thermal_of_cooling_device_register(struct device_node *np, char > > > > *, void *, > > > > - const struct > > > > thermal_cooling_device_ops *); void > > > > thermal_cooling_device_unregister(struct thermal_cooling_device > > > > *); struct thermal_zone_device > > > > *thermal_zone_get_zone_by_name(const char *name); int > > > > thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned > > > > long *temp); -- 2.0.0.rc2 > > > > > > > > > > > > -- > Best regards, > > Lukasz Majewski > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Hi Eduardo, > On Wed, Jan 14, 2015 at 04:01:06PM +0100, Lukasz Majewski wrote: > > Hi Eduardo, > > > > > On Fri, Jan 02, 2015 at 02:54:28PM -0400, Eduardo Valentin wrote: > > > > On Mon, Dec 22, 2014 at 05:27:41PM +0100, Lukasz Majewski wrote: > > > > > Odroid U3 fan can work without being registered as OF cooling > > > > > device (with CONFIG_THERMAL_OF disabled). > > > > > In this situation it can be controlled via PWM entry at > > > > > /sys/class/hwmon/hwmon0/pwm1. > > > > > > > > > > Therefore, the thermal_of_cooling_device_register() function > > > > > needs a stub to allow clean compilation. > > > > > > > > > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> > > > > > > > > Acked-by: Eduardo Valentin <edubezval@gmail.com> > > > > > > Sorry, too fast, > > > > > > This is actually > > > Nacked-by: Eduardo Valentin <edubezval@gmail.com> > > > > > > :-) > > > > > > I get this error: > > > drivers/thermal/thermal_core.c:1210:1: error: redefinition of > > > ‘thermal_of_cooling_device_register’ > > > thermal_of_cooling_device_register(struct device_node *np, > > > ^ > > > In file included from drivers/thermal/thermal_core.c:34:0: > > > include/linux/thermal.h:321:1: note: previous definition of > > > ‘thermal_of_cooling_device_register’ was here > > > thermal_of_cooling_device_register(struct device_node *np, > > > ^ > > > > > > > > > We provide the function in thermal core even if CONFIG_THERMAL_OF > > > is not set. > > > > Unfortunately the PWM fan subsystem can work perfectly fine without > > CONFIG_THERMAL. > > > > Now I understand what you are trying to do. > > > I think that it would be enough to make something like this in > > the ./include/linux/thermal.h: > > > > #ifdef CONFIG_THERMAL > Well, I think it should be the opposite here: > > #ifndef CONFIG_THERMAL > > that is, if no config thermal, then you provide the stub not the other > way around. This seems like a better solution :-). Thanks. > > > static inline struct thermal_cooling_device * > > thermal_of_cooling_device_register(struct > > device_node *np, char *type, void *devdata, > > const struct > > thermal_cooling_device_ops *ops) { > > return NULL; > > } > > #else > > [ already present declaration of > > thermal_of_cooling_device_register() ] > > #endif /* CONFIG_THERMAL */ > > > > > > > > > > > > > > > > > --- > > > > > Changes for v2: > > > > > - None > > > > > --- > > > > > include/linux/thermal.h | 14 +++++++++++--- > > > > > 1 file changed, 11 insertions(+), 3 deletions(-) > > > > > > > > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > > > > index 2de3d9e..871123c 100644 > > > > > --- a/include/linux/thermal.h > > > > > +++ b/include/linux/thermal.h > > > > > @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct > > > > > device *dev, int id, void *data, const struct > > > > > thermal_zone_of_device_ops *ops); void > > > > > thermal_zone_of_sensor_unregister(struct device *dev, struct > > > > > thermal_zone_device *tz); +struct thermal_cooling_device * > > > > > +thermal_of_cooling_device_register(struct device_node *np, > > > > > + char *type, void *devdata, > > > > > + const struct > > > > > thermal_cooling_device_ops *); #else > > > > > static inline struct thermal_zone_device * > > > > > thermal_zone_of_sensor_register(struct device *dev, int id, > > > > > void *data, @@ -342,6 +346,13 @@ void > > > > > thermal_zone_of_sensor_unregister(struct device *dev, { > > > > > } > > > > > > > > > > +static inline struct thermal_cooling_device * > > > > > +thermal_of_cooling_device_register(struct device_node *np, > > > > > + char *type, void *devdata, > > > > > + const struct > > > > > thermal_cooling_device_ops *ops) +{ > > > > > + return NULL; > > > > > +} > > > > > #endif > > > > > struct thermal_zone_device > > > > > *thermal_zone_device_register(const char *, int, int, void *, > > > > > struct thermal_zone_device_ops *, @@ -357,9 +368,6 @@ void > > > > > thermal_zone_device_update(struct thermal_zone_device *); > > > > > struct thermal_cooling_device > > > > > *thermal_cooling_device_register(char *, void *, const struct > > > > > thermal_cooling_device_ops *); -struct thermal_cooling_device > > > > > * -thermal_of_cooling_device_register(struct device_node *np, > > > > > char *, void *, > > > > > - const struct > > > > > thermal_cooling_device_ops *); void > > > > > thermal_cooling_device_unregister(struct > > > > > thermal_cooling_device *); struct thermal_zone_device > > > > > *thermal_zone_get_zone_by_name(const char *name); int > > > > > thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned > > > > > long *temp); -- 2.0.0.rc2 > > > > > > > > > > > > > > > > > > > -- > > Best regards, > > > > Lukasz Majewski > > > > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 2de3d9e..871123c 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -328,6 +328,10 @@ thermal_zone_of_sensor_register(struct device *dev, int id, void *data, const struct thermal_zone_of_device_ops *ops); void thermal_zone_of_sensor_unregister(struct device *dev, struct thermal_zone_device *tz); +struct thermal_cooling_device * +thermal_of_cooling_device_register(struct device_node *np, + char *type, void *devdata, + const struct thermal_cooling_device_ops *); #else static inline struct thermal_zone_device * thermal_zone_of_sensor_register(struct device *dev, int id, void *data, @@ -342,6 +346,13 @@ void thermal_zone_of_sensor_unregister(struct device *dev, { } +static inline struct thermal_cooling_device * +thermal_of_cooling_device_register(struct device_node *np, + char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) +{ + return NULL; +} #endif struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, @@ -357,9 +368,6 @@ void thermal_zone_device_update(struct thermal_zone_device *); struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); -struct thermal_cooling_device * -thermal_of_cooling_device_register(struct device_node *np, char *, void *, - const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp);
Odroid U3 fan can work without being registered as OF cooling device (with CONFIG_THERMAL_OF disabled). In this situation it can be controlled via PWM entry at /sys/class/hwmon/hwmon0/pwm1. Therefore, the thermal_of_cooling_device_register() function needs a stub to allow clean compilation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> --- Changes for v2: - None --- include/linux/thermal.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)