| Message ID | 1422028154-2349-2-git-send-email-wxt@rock-chips.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On Fri, Jan 23, 2015 at 11:49 PM, Caesar Wang <wxt@rock-chips.com> wrote: > In general, the kernel should report temperature readings exactly as > reported by the hardware. The cpu / gpu thermal driver works in 5 degree > increments,but we ought to do more accurate. The temperature will do > linear interpolation between the entries in the table. > > Test= $md5sum /dev/zero & > $while true; do grep "" /sys/class/thermal/thermal_zone[1-2]/temp; > sleep .5; done > > e.g. We can get the result as follows: > /sys/class/thermal/thermal_zone1/temp:39994 > /sys/class/thermal/thermal_zone2/temp:39086 > /sys/class/thermal/thermal_zone1/temp:39994 > /sys/class/thermal/thermal_zone2/temp:39540 > /sys/class/thermal/thermal_zone1/temp:39540 > /sys/class/thermal/thermal_zone2/temp:39540 > /sys/class/thermal/thermal_zone1/temp:39540 > /sys/class/thermal/thermal_zone2/temp:39994 > > Signed-off-by: Caesar Wang <wxt@rock-chips.com> > Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > --- > > Changes in v5: > Fixed some style. > > Changes in v4: > "return -EAGAIN" instead of "return rk_tsadcv2_code_to_temp(code)" > > Changes in v3: > Suggested-by Daniel Kurtz, > the check doesn't reject "code == 0xfff" > Fixed in rk_tsadcv2_code_to_temp(u32 code) > > Changes in v2: > Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > drivers/thermal/rockchip_thermal.c | 38 +++++++++++++++++++++++++------------- > 1 file changed, 25 insertions(+), 13 deletions(-) > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c > index 1bcddfc..83bdf82 100644 > --- a/drivers/thermal/rockchip_thermal.c > +++ b/drivers/thermal/rockchip_thermal.c > @@ -193,19 +193,22 @@ static u32 rk_tsadcv2_temp_to_code(long temp) > > static long rk_tsadcv2_code_to_temp(u32 code) > { > - int high, low, mid; > - > - low = 0; > - high = ARRAY_SIZE(v2_code_table) - 1; > - mid = (high + low) / 2; > - > - if (code > v2_code_table[low].code || code < v2_code_table[high].code) > - return 125000; /* No code available, return max temperature */ > + unsigned int low = 0; > + unsigned int high = ARRAY_SIZE(v2_code_table) - 1; > + unsigned int mid = (low + high) / 2; > + unsigned int num; > + unsigned long denom; > + > + /* Invalid code, return -EAGAIN */ > + if (code > TSADCV2_DATA_MASK) > + return -EAGAIN; > > - while (low <= high) { > - if (code >= v2_code_table[mid].code && code < > - v2_code_table[mid - 1].code) > - return v2_code_table[mid].temp; > + while (low <= high && mid) { > + if (code >= v2_code_table[mid].code && > + code < v2_code_table[mid - 1].code) > + break; > + else if (code == TSADCV2_DATA_MASK) > + break; I don't think you need this check since this is v2_code_table[0]. But, it doesn't hurt, so either way, this is: Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> > else if (code < v2_code_table[mid].code) > low = mid + 1; > else > @@ -213,7 +216,16 @@ static long rk_tsadcv2_code_to_temp(u32 code) > mid = (low + high) / 2; > } > > - return 125000; > + /* > + * The 5C granularity provided by the table is too much. Let's > + * assume that the relationship between sensor readings and > + * temperature between 2 table entries is linear and interpolate > + * to produce less granular result. > + */ > + num = v2_code_table[mid].temp - v2_code_table[mid - 1].temp; > + num *= v2_code_table[mid - 1].code - code; > + denom = v2_code_table[mid - 1].code - v2_code_table[mid].code; > + return v2_code_table[mid - 1].temp + (num / denom); > } > > /** > -- > 1.9.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 1bcddfc..83bdf82 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -193,19 +193,22 @@ static u32 rk_tsadcv2_temp_to_code(long temp) static long rk_tsadcv2_code_to_temp(u32 code) { - int high, low, mid; - - low = 0; - high = ARRAY_SIZE(v2_code_table) - 1; - mid = (high + low) / 2; - - if (code > v2_code_table[low].code || code < v2_code_table[high].code) - return 125000; /* No code available, return max temperature */ + unsigned int low = 0; + unsigned int high = ARRAY_SIZE(v2_code_table) - 1; + unsigned int mid = (low + high) / 2; + unsigned int num; + unsigned long denom; + + /* Invalid code, return -EAGAIN */ + if (code > TSADCV2_DATA_MASK) + return -EAGAIN; - while (low <= high) { - if (code >= v2_code_table[mid].code && code < - v2_code_table[mid - 1].code) - return v2_code_table[mid].temp; + while (low <= high && mid) { + if (code >= v2_code_table[mid].code && + code < v2_code_table[mid - 1].code) + break; + else if (code == TSADCV2_DATA_MASK) + break; else if (code < v2_code_table[mid].code) low = mid + 1; else @@ -213,7 +216,16 @@ static long rk_tsadcv2_code_to_temp(u32 code) mid = (low + high) / 2; } - return 125000; + /* + * The 5C granularity provided by the table is too much. Let's + * assume that the relationship between sensor readings and + * temperature between 2 table entries is linear and interpolate + * to produce less granular result. + */ + num = v2_code_table[mid].temp - v2_code_table[mid - 1].temp; + num *= v2_code_table[mid - 1].code - code; + denom = v2_code_table[mid - 1].code - v2_code_table[mid].code; + return v2_code_table[mid - 1].temp + (num / denom); } /**
In general, the kernel should report temperature readings exactly as reported by the hardware. The cpu / gpu thermal driver works in 5 degree increments,but we ought to do more accurate. The temperature will do linear interpolation between the entries in the table. Test= $md5sum /dev/zero & $while true; do grep "" /sys/class/thermal/thermal_zone[1-2]/temp; sleep .5; done e.g. We can get the result as follows: /sys/class/thermal/thermal_zone1/temp:39994 /sys/class/thermal/thermal_zone2/temp:39086 /sys/class/thermal/thermal_zone1/temp:39994 /sys/class/thermal/thermal_zone2/temp:39540 /sys/class/thermal/thermal_zone1/temp:39540 /sys/class/thermal/thermal_zone2/temp:39540 /sys/class/thermal/thermal_zone1/temp:39540 /sys/class/thermal/thermal_zone2/temp:39994 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- Changes in v5: Fixed some style. Changes in v4: "return -EAGAIN" instead of "return rk_tsadcv2_code_to_temp(code)" Changes in v3: Suggested-by Daniel Kurtz, the check doesn't reject "code == 0xfff" Fixed in rk_tsadcv2_code_to_temp(u32 code) Changes in v2: Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> drivers/thermal/rockchip_thermal.c | 38 +++++++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 13 deletions(-)