Message ID | 1436859656-16964-1-git-send-email-wni@nvidia.com (mailing list archive) |
---|---|
State | Accepted, archived |
Delegated to: | Zhang Rui |
Headers | show |
Hi, Rui Will you take this patch? Thanks. Wei. On 2015?07?14? 15:40, Wei Ni wrote: > The Linux thermal framework support to change thermal governor > policy in userspace, but it can't show what available policies > supported. > > This patch adds available_policies attribute to the thermal > framework, it can list the thermal governors which can be > used for a particular zone. This attribute is read only. > > Signed-off-by: Wei Ni <wni@nvidia.com> > Reviewed-by: Javi Merino <javi.merino@arm.com> > --- > v3: Initialize "size" as PAGE_SIZE. > v2: This change had been submitted and discussed in > http://marc.info/?l=linux-tegra&m=138961183931457&w=2 > https://www.marc.info/?l=linux-pm&m=138986468007449&w=1 > cherry-picked it,and updated to this v2 version. > > Documentation/thermal/sysfs-api.txt | 6 ++++++ > drivers/thermal/thermal_core.c | 28 ++++++++++++++++++++++++++++ > 2 files changed, 34 insertions(+) > > diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt > index c1f6864a8c5d..10f062ea6bc2 100644 > --- a/Documentation/thermal/sysfs-api.txt > +++ b/Documentation/thermal/sysfs-api.txt > @@ -180,6 +180,7 @@ Thermal zone device sys I/F, created once it's registered: > |---temp: Current temperature > |---mode: Working mode of the thermal zone > |---policy: Thermal governor used for this zone > + |---available_policies: Available thermal governors for this zone > |---trip_point_[0-*]_temp: Trip point temperature > |---trip_point_[0-*]_type: Trip point type > |---trip_point_[0-*]_hyst: Hysteresis value for this trip point > @@ -256,6 +257,10 @@ policy > One of the various thermal governors used for a particular zone. > RW, Required > > +available_policies > + Available thermal governors which can be used for a particular zone. > + RO, Required > + > trip_point_[0-*]_temp > The temperature above which trip point will be fired. > Unit: millidegree Celsius > @@ -417,6 +422,7 @@ method, the sys I/F structure will be built like this: > |---temp: 37000 > |---mode: enabled > |---policy: step_wise > + |---available_policies: step_wise fair_share > |---trip_point_0_temp: 100000 > |---trip_point_0_type: critical > |---trip_point_1_temp: 80000 > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index 04659bfb888b..c4700950e42e 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -847,6 +847,27 @@ policy_show(struct device *dev, struct device_attribute *devattr, char *buf) > return sprintf(buf, "%s\n", tz->governor->name); > } > > +static ssize_t > +available_policies_show(struct device *dev, struct device_attribute *devattr, > + char *buf) > +{ > + struct thermal_governor *pos; > + ssize_t count = 0; > + ssize_t size = PAGE_SIZE; > + > + mutex_lock(&thermal_governor_lock); > + > + list_for_each_entry(pos, &thermal_governor_list, governor_list) { > + size = PAGE_SIZE - count; > + count += scnprintf(buf + count, size, "%s ", pos->name); > + } > + count += scnprintf(buf + count, size, "\n"); > + > + mutex_unlock(&thermal_governor_lock); > + > + return count; > +} > + > #ifdef CONFIG_THERMAL_EMULATION > static ssize_t > emul_temp_store(struct device *dev, struct device_attribute *attr, > @@ -1032,6 +1053,7 @@ static DEVICE_ATTR(temp, 0444, temp_show, NULL); > static DEVICE_ATTR(mode, 0644, mode_show, mode_store); > static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); > static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store); > +static DEVICE_ATTR(available_policies, S_IRUGO, available_policies_show, NULL); > > /* sys I/F for cooling device */ > #define to_cooling_device(_dev) \ > @@ -1817,6 +1839,11 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, > if (result) > goto unregister; > > + /* Create available_policies attribute */ > + result = device_create_file(&tz->device, &dev_attr_available_policies); > + if (result) > + goto unregister; > + > /* Update 'this' zone's governor information */ > mutex_lock(&thermal_governor_lock); > > @@ -1917,6 +1944,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) > if (tz->ops->get_mode) > device_remove_file(&tz->device, &dev_attr_mode); > device_remove_file(&tz->device, &dev_attr_policy); > + device_remove_file(&tz->device, &dev_attr_available_policies); > remove_trip_attrs(tz); > thermal_set_governor(tz, NULL); > > ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ----------------------------------------------------------------------------------- -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index c1f6864a8c5d..10f062ea6bc2 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -180,6 +180,7 @@ Thermal zone device sys I/F, created once it's registered: |---temp: Current temperature |---mode: Working mode of the thermal zone |---policy: Thermal governor used for this zone + |---available_policies: Available thermal governors for this zone |---trip_point_[0-*]_temp: Trip point temperature |---trip_point_[0-*]_type: Trip point type |---trip_point_[0-*]_hyst: Hysteresis value for this trip point @@ -256,6 +257,10 @@ policy One of the various thermal governors used for a particular zone. RW, Required +available_policies + Available thermal governors which can be used for a particular zone. + RO, Required + trip_point_[0-*]_temp The temperature above which trip point will be fired. Unit: millidegree Celsius @@ -417,6 +422,7 @@ method, the sys I/F structure will be built like this: |---temp: 37000 |---mode: enabled |---policy: step_wise + |---available_policies: step_wise fair_share |---trip_point_0_temp: 100000 |---trip_point_0_type: critical |---trip_point_1_temp: 80000 diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 04659bfb888b..c4700950e42e 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -847,6 +847,27 @@ policy_show(struct device *dev, struct device_attribute *devattr, char *buf) return sprintf(buf, "%s\n", tz->governor->name); } +static ssize_t +available_policies_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct thermal_governor *pos; + ssize_t count = 0; + ssize_t size = PAGE_SIZE; + + mutex_lock(&thermal_governor_lock); + + list_for_each_entry(pos, &thermal_governor_list, governor_list) { + size = PAGE_SIZE - count; + count += scnprintf(buf + count, size, "%s ", pos->name); + } + count += scnprintf(buf + count, size, "\n"); + + mutex_unlock(&thermal_governor_lock); + + return count; +} + #ifdef CONFIG_THERMAL_EMULATION static ssize_t emul_temp_store(struct device *dev, struct device_attribute *attr, @@ -1032,6 +1053,7 @@ static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store); +static DEVICE_ATTR(available_policies, S_IRUGO, available_policies_show, NULL); /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ @@ -1817,6 +1839,11 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (result) goto unregister; + /* Create available_policies attribute */ + result = device_create_file(&tz->device, &dev_attr_available_policies); + if (result) + goto unregister; + /* Update 'this' zone's governor information */ mutex_lock(&thermal_governor_lock); @@ -1917,6 +1944,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); device_remove_file(&tz->device, &dev_attr_policy); + device_remove_file(&tz->device, &dev_attr_available_policies); remove_trip_attrs(tz); thermal_set_governor(tz, NULL);