@@ -637,10 +637,6 @@ static ssize_t ds2780_read_param_eeprom_bin(struct file *filp,
struct power_supply *psy = to_power_supply(dev);
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
- count = min_t(loff_t, count,
- DS2780_EEPROM_BLOCK1_END -
- DS2780_EEPROM_BLOCK1_START + 1 - off);
-
return ds2780_read_block(dev_info, buf,
DS2780_EEPROM_BLOCK1_START + off, count);
}
@@ -655,10 +651,6 @@ static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
int ret;
- count = min_t(loff_t, count,
- DS2780_EEPROM_BLOCK1_END -
- DS2780_EEPROM_BLOCK1_START + 1 - off);
-
ret = ds2780_write(dev_info, buf,
DS2780_EEPROM_BLOCK1_START + off, count);
if (ret < 0)
@@ -676,7 +668,7 @@ static struct bin_attribute ds2780_param_eeprom_bin_attr = {
.name = "param_eeprom",
.mode = S_IRUGO | S_IWUSR,
},
- .size = DS2780_EEPROM_BLOCK1_END - DS2780_EEPROM_BLOCK1_START + 1,
+ .size = DS2780_PARAM_EEPROM_SIZE,
.read = ds2780_read_param_eeprom_bin,
.write = ds2780_write_param_eeprom_bin,
};
@@ -690,10 +682,6 @@ static ssize_t ds2780_read_user_eeprom_bin(struct file *filp,
struct power_supply *psy = to_power_supply(dev);
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
- count = min_t(loff_t, count,
- DS2780_EEPROM_BLOCK0_END -
- DS2780_EEPROM_BLOCK0_START + 1 - off);
-
return ds2780_read_block(dev_info, buf,
DS2780_EEPROM_BLOCK0_START + off, count);
}
@@ -708,10 +696,6 @@ static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
int ret;
- count = min_t(loff_t, count,
- DS2780_EEPROM_BLOCK0_END -
- DS2780_EEPROM_BLOCK0_START + 1 - off);
-
ret = ds2780_write(dev_info, buf,
DS2780_EEPROM_BLOCK0_START + off, count);
if (ret < 0)
@@ -729,7 +713,7 @@ static struct bin_attribute ds2780_user_eeprom_bin_attr = {
.name = "user_eeprom",
.mode = S_IRUGO | S_IWUSR,
},
- .size = DS2780_EEPROM_BLOCK0_END - DS2780_EEPROM_BLOCK0_START + 1,
+ .size = DS2780_USER_EEPROM_SIZE,
.read = ds2780_read_user_eeprom_bin,
.write = ds2780_write_user_eeprom_bin,
};
The change removes redundant sysfs binary file boundary checks while reading or writing "param_eeprom" or "user_eeprom", the checks are not needed, since this task is done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> --- drivers/power/ds2780_battery.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-)