Message ID | 1442265973-32261-8-git-send-email-afd@ti.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On Mon, Sep 14, 2015 at 04:26:13PM -0500, Andrew F. Davis wrote: > Some devices have a pin that can generate an interrupt when > the battery's status changes. Add an interrupt handler to > read the new battery status. > > Signed-off-by: Andrew F. Davis <afd@ti.com> > --- > drivers/power/bq27xxx_battery.c | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/bq27xxx_battery.c > index 10be8a6..29fdcd7 100644 > --- a/drivers/power/bq27xxx_battery.c > +++ b/drivers/power/bq27xxx_battery.c > @@ -48,6 +48,7 @@ > #include <linux/idr.h> > #include <linux/i2c.h> > #include <linux/slab.h> > +#include <linux/interrupt.h> > #include <asm/unaligned.h> > > #include <linux/power/bq27xxx_battery.h> > @@ -732,6 +733,15 @@ static void bq27xxx_battery_update(struct bq27xxx_device_info *di) > di->last_update = jiffies; > } > > +static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data) > +{ > + struct bq27xxx_device_info *di = data; > + > + bq27xxx_battery_update(di); > + > + return IRQ_HANDLED; > +} > + > static void bq27xxx_battery_poll(struct work_struct *work) > { > struct bq27xxx_device_info *di = > @@ -1137,6 +1147,19 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client, > > i2c_set_clientdata(client, di); > > + if (client->irq) { > + retval = devm_request_threaded_irq(&client->dev, client->irq, > + NULL, bq27xxx_battery_irq_handler_thread, > + IRQF_ONESHOT, > + name, di); Hi Andrew, I think it'll be better if you explicitly specify the rising vs. falling edge interrupt flags according to exactly what the bq27xxx will trigger on to ensure the corresponding GPIO module is always configured properly. While we are at it, was the platform-data based initialization in conjunction with interrupts tested? Regards, -- Andreas Dannenberg Texas Instruments Inc > + if (retval) { > + dev_err(&client->dev, > + "Unable to register IRQ %d error %d\n", > + client->irq, retval); > + return retval; > + } > + } > + > return 0; > > batt_failed: > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/15/2015 01:47 PM, Andreas Dannenberg wrote: > On Mon, Sep 14, 2015 at 04:26:13PM -0500, Andrew F. Davis wrote: >> Some devices have a pin that can generate an interrupt when >> the battery's status changes. Add an interrupt handler to >> read the new battery status. >> >> Signed-off-by: Andrew F. Davis <afd@ti.com> >> --- >> drivers/power/bq27xxx_battery.c | 23 +++++++++++++++++++++++ >> 1 file changed, 23 insertions(+) >> >> diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/bq27xxx_battery.c >> index 10be8a6..29fdcd7 100644 >> --- a/drivers/power/bq27xxx_battery.c >> +++ b/drivers/power/bq27xxx_battery.c >> @@ -48,6 +48,7 @@ >> #include <linux/idr.h> >> #include <linux/i2c.h> >> #include <linux/slab.h> >> +#include <linux/interrupt.h> >> #include <asm/unaligned.h> >> >> #include <linux/power/bq27xxx_battery.h> >> @@ -732,6 +733,15 @@ static void bq27xxx_battery_update(struct bq27xxx_device_info *di) >> di->last_update = jiffies; >> } >> >> +static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data) >> +{ >> + struct bq27xxx_device_info *di = data; >> + >> + bq27xxx_battery_update(di); >> + >> + return IRQ_HANDLED; >> +} >> + >> static void bq27xxx_battery_poll(struct work_struct *work) >> { >> struct bq27xxx_device_info *di = >> @@ -1137,6 +1147,19 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client, >> >> i2c_set_clientdata(client, di); >> >> + if (client->irq) { >> + retval = devm_request_threaded_irq(&client->dev, client->irq, >> + NULL, bq27xxx_battery_irq_handler_thread, >> + IRQF_ONESHOT, >> + name, di); > > Hi Andrew, > I think it'll be better if you explicitly specify the rising vs. falling > edge interrupt flags according to exactly what the bq27xxx will trigger > on to ensure the corresponding GPIO module is always configured properly. > That was how I was going to have it, but this may be device dependent, so I decided to leave it up to the interrupt controller and set it with DT: interrupts = <28 IRQ_TYPE_EDGE_FALLING>; > While we are at it, was the platform-data based initialization in > conjunction with interrupts tested? > The only time we initialize with platform-data is when we are wired with HDQ, in that case this IRQ code does not get called, so nothing changes. Regards, Andrew > Regards, > > -- > Andreas Dannenberg > Texas Instruments Inc > > >> + if (retval) { >> + dev_err(&client->dev, >> + "Unable to register IRQ %d error %d\n", >> + client->irq, retval); >> + return retval; >> + } >> + } >> + >> return 0; >> >> batt_failed: >> -- >> 1.9.1 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-pm" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/bq27xxx_battery.c index 10be8a6..29fdcd7 100644 --- a/drivers/power/bq27xxx_battery.c +++ b/drivers/power/bq27xxx_battery.c @@ -48,6 +48,7 @@ #include <linux/idr.h> #include <linux/i2c.h> #include <linux/slab.h> +#include <linux/interrupt.h> #include <asm/unaligned.h> #include <linux/power/bq27xxx_battery.h> @@ -732,6 +733,15 @@ static void bq27xxx_battery_update(struct bq27xxx_device_info *di) di->last_update = jiffies; } +static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data) +{ + struct bq27xxx_device_info *di = data; + + bq27xxx_battery_update(di); + + return IRQ_HANDLED; +} + static void bq27xxx_battery_poll(struct work_struct *work) { struct bq27xxx_device_info *di = @@ -1137,6 +1147,19 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client, i2c_set_clientdata(client, di); + if (client->irq) { + retval = devm_request_threaded_irq(&client->dev, client->irq, + NULL, bq27xxx_battery_irq_handler_thread, + IRQF_ONESHOT, + name, di); + if (retval) { + dev_err(&client->dev, + "Unable to register IRQ %d error %d\n", + client->irq, retval); + return retval; + } + } + return 0; batt_failed:
Some devices have a pin that can generate an interrupt when the battery's status changes. Add an interrupt handler to read the new battery status. Signed-off-by: Andrew F. Davis <afd@ti.com> --- drivers/power/bq27xxx_battery.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)