From patchwork Tue Sep 15 17:58:25 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andreas Dannenberg X-Patchwork-Id: 7188931 Return-Path: X-Original-To: patchwork-linux-pm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id D3498BF036 for ; Tue, 15 Sep 2015 17:59:20 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id E843D20818 for ; Tue, 15 Sep 2015 17:59:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id F040A2081B for ; Tue, 15 Sep 2015 17:59:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752546AbbIOR7P (ORCPT ); Tue, 15 Sep 2015 13:59:15 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:33479 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751573AbbIOR7N (ORCPT ); Tue, 15 Sep 2015 13:59:13 -0400 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by comal.ext.ti.com (8.13.7/8.13.7) with ESMTP id t8FHwjp1014044; Tue, 15 Sep 2015 12:58:45 -0500 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id t8FHwj8l011282; Tue, 15 Sep 2015 12:58:45 -0500 Received: from dlep32.itg.ti.com (157.170.170.100) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.3.224.2; Tue, 15 Sep 2015 12:58:46 -0500 Received: from beast.tx.rr.com (ileax41-snat.itg.ti.com [10.172.224.153]) by dlep32.itg.ti.com (8.14.3/8.13.8) with ESMTP id t8FHwdgP029416; Tue, 15 Sep 2015 12:58:43 -0500 From: Andreas Dannenberg To: Sebastian Reichel , Dmitry Eremin-Solenikov , David Woodhouse , Laurentiu Palcu , Krzysztof Kozlowski CC: Ramakrishna Pallala , , , Andreas Dannenberg Subject: [PATCH v4 01/10] dt: power: bq24257-charger: Cover additional devices Date: Tue, 15 Sep 2015 12:58:25 -0500 Message-ID: <1442339914-25843-2-git-send-email-dannenberg@ti.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1442339914-25843-1-git-send-email-dannenberg@ti.com> References: <1442339914-25843-1-git-send-email-dannenberg@ti.com> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Extend the bq24257 charger's device tree documentation to cover the bq24250 and bq24251 devices as well feature additions. Signed-off-by: Andreas Dannenberg Reviewed-by: Krzysztof Kozlowski --- .../devicetree/bindings/power/bq24257.txt | 55 ++++++++++++++++++++-- 1 file changed, 50 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/power/bq24257.txt b/Documentation/devicetree/bindings/power/bq24257.txt index 5c9d394..3815897 100644 --- a/Documentation/devicetree/bindings/power/bq24257.txt +++ b/Documentation/devicetree/bindings/power/bq24257.txt @@ -1,21 +1,66 @@ -Binding for TI bq24257 Li-Ion Charger +Binding for TI bq24250/bq24251/bq24257 Li-Ion Charger Required properties: - compatible: Should contain one of the following: + * "ti,bq24250" + * "ti,bq24251" * "ti,bq24257" -- reg: integer, i2c address of the device. +- reg: integer, i2c address of the device. +- stat-gpios: GPIO used for the devices STAT_IN pin. Alternatively the pin can + also be defined through the standard interrupt definition properties (see + optional properties section below). Only use one method. - ti,battery-regulation-voltage: integer, maximum charging voltage in uV. -- ti,charge-current: integer, maximum charging current in uA. -- ti,termination-current: integer, charge will be terminated when current in - constant-voltage phase drops below this value (in uA). +- ti,charge-current: integer, maximum charging current in uA. +- ti,termination-current: integer, charge will be terminated when current in + constant-voltage phase drops below this value (in uA). + +Optional properties: +- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin. + This pin is not available on all devices however it should be used if + possible as this is the recommended way to obtain the charger's input PG + state. If this pin is not specified a software-based approach for PG + detection is used. +- ti,current-limit: The maximum current to be drawn from the charger's input + (in uA). If this property is not specified a USB D+/D- signal based charger + type detection is used (if available) and the input limit current is set + accordingly. If the D+/D- based detection is not available on a given device + a default of 500,000 is used (=500mA). +- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If + not specified a default of 6,5000,000 (=6.5V) is used. +- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic + power path management (in uV). If not specified a default of 4,360,000 + (=4.36V) is used. +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts" and only in case "stat-gpios" is not used. +- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in + conjunction with "interrupt-parent" and only in case "stat-gpios" is not + used. Example: bq24257 { compatible = "ti,bq24257"; reg = <0x6a>; + stat-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; ti,battery-regulation-voltage = <4200000>; ti,charge-current = <1000000>; ti,termination-current = <50000>; }; + +Example: + +bq24250 { + compatible = "ti,bq24250"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <500000>; + ti,termination-current = <50000>; + ti,current-limit = <900000>; + ti,ovp-voltage = <9500000>; + ti,in-dpm-voltage = <4440000>; +};