diff mbox

[v4,2/2] add property of "linux,wakeup" for juno.dts

Message ID 1442386021-5113-2-git-send-email-zhaoyang.huang@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Zhaoyang Huang Sept. 16, 2015, 6:47 a.m. UTC
add property of "linux,wakeup" to let the driver know
if the device should work as wakeup source

Signed-off-by: Zhaoyang Huang <zhaoyang.huang@linaro.org>
---
 Documentation/devicetree/bindings/serial/pl011.txt |    3 ++-
 arch/arm64/boot/dts/arm/juno-base.dtsi             |    1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

Comments

Sudeep Holla Sept. 16, 2015, 8:41 a.m. UTC | #1
On 16/09/15 07:47, Zhaoyang Huang wrote:
> add property of "linux,wakeup" to let the driver know
> if the device should work as wakeup source
>

I think I made it *pretty clear multiple times by now* that PL011 is
*not a wakeup source* on Juno. I have no idea what you are testing, it
simply can't wakeup the system for suspended state. So I seriously doubt
now what is that you are testing.

So, this patch clearly gets NACK.

Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sudeep Holla Sept. 16, 2015, 8:59 a.m. UTC | #2
Hi Zhaouyang,

On 16/09/15 09:53, Zhaoyang Huang wrote:
> Hi Sudeep,

Please stop top-posting, I have told you many times now in private.

> Sorry for the confusions I made. I am testing the suspend to idle on
> juno, which is similar to suspend to ram, while the difference is the
> cpu will go into idle itself(you can refer the function freeze_enter())
> instead of running cpu_suspend finally. I find that the pl011 can wakeup
> the system by receiving from the tty.
>

No, it shouldn't be allowed to be configured as wakeup if it can't
wakeup from S2R. So please stop sending this patch. I need to see real
use case for PL011 as a wakeup source.

Also, if we go by your definition, we can make any interrupt as wakeup
source. You need to understand that we hardware support for an interrupt
to be a wakeup irq.

Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
index cbae3d9..609e8e9 100644
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -35,7 +35,8 @@  Optional properties:
 - poll-timeout-ms:
 	   Poll timeout when auto-poll is set, default
 	   3000ms.
-
+- linux,wakeup:
+	   set the pl011 work as wakeup source for suspend to ram/idle
 See also bindings/arm/primecell.txt
 
 Example:
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index a3d5a77..f7bb150 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -152,6 +152,7 @@ 
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
 		clock-names = "uartclk", "apb_pclk";
+		linux,wakeup;
 	};
 
 	i2c@7ffa0000 {