diff mbox

[RESEND,8/8] ARM: dts: rockchip: enable the tsadc for rk3228 evb

Message ID 1455521613-27340-9-git-send-email-wxt@rock-chips.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Caesar Wang Feb. 15, 2016, 7:33 a.m. UTC
This patch enables the tsadc for rk3228 evb board.

The rk3228 evb board uses the CRU to reset the chip since it hasn't the
PMIC to connect it, and TSHUT is low active on evb board.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

 arch/arm/boot/dts/rk3228-evb.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Heiko Stübner March 1, 2016, 10:03 a.m. UTC | #1
Am Montag, 15. Februar 2016, 15:33:33 schrieb Caesar Wang:
> This patch enables the tsadc for rk3228 evb board.
> 
> The rk3228 evb board uses the CRU to reset the chip since it hasn't the
> PMIC to connect it, and TSHUT is low active on evb board.
> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>

applied to my dts32 branch for 4.6


Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index e3898b8..c75cc41 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -61,6 +61,13 @@ 
 	status = "okay";
 };
 
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
 &uart2 {
 	status = "okay";
 };