diff mbox

[5/7] clk: samsung: exynos542x: Add the clock id for ACLK

Message ID 1460091646-28701-6-git-send-email-cw00.choi@samsung.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Chanwoo Choi April 8, 2016, 5 a.m. UTC 
This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
Bus. This clock should be handled in Bus frequency scaling driver.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 85 +++++++++++++++++++++++-------------
 1 file changed, 55 insertions(+), 30 deletions(-)

Comments

Krzysztof Kozlowski April 12, 2016, 11:25 a.m. UTC | #1 
On 04/08/2016 07:00 AM, Chanwoo Choi wrote:
> This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
> Bus. This clock should be handled in Bus frequency scaling driver.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos5420.c | 85 +++++++++++++++++++++++-------------
>  1 file changed, 55 insertions(+), 30 deletions(-)

The IDs itself look good but you are not adding only clock ID. You are
changing all of them from NULL-flags to CLK_SET_RATE_PARENT. This should
be explained in the commit message why you need it. Probably it should
be also in separate commit.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Figa April 13, 2016, 6:20 a.m. UTC | #2 
2016-04-12 14:25 GMT+03:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
> On 04/08/2016 07:00 AM, Chanwoo Choi wrote:
>> This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
>> Bus. This clock should be handled in Bus frequency scaling driver.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>>  drivers/clk/samsung/clk-exynos5420.c | 85 +++++++++++++++++++++++-------------
>>  1 file changed, 55 insertions(+), 30 deletions(-)
>
> The IDs itself look good but you are not adding only clock ID. You are
> changing all of them from NULL-flags to CLK_SET_RATE_PARENT. This should
> be explained in the commit message why you need it. Probably it should
> be also in separate commit.

+1. And CLK_SET_RATE_PARENT for a clock which has a mux as its parent
is a bit suspicious, so I'd like to know the rationale for each single
clock with CLK_SET_RATE_PARENT being added.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chanwoo Choi April 14, 2016, 6:28 a.m. UTC | #3 
Hi Tomasz and Krzysztof,

On 2016? 04? 13? 15:20, Tomasz Figa wrote:
> 2016-04-12 14:25 GMT+03:00 Krzysztof Kozlowski <k.kozlowski@samsung.com>:
>> On 04/08/2016 07:00 AM, Chanwoo Choi wrote:
>>> This patch adds the clock id for ACLK clock which is source clock of AMBA AXI
>>> Bus. This clock should be handled in Bus frequency scaling driver.
>>>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>>> ---
>>>  drivers/clk/samsung/clk-exynos5420.c | 85 +++++++++++++++++++++++-------------
>>>  1 file changed, 55 insertions(+), 30 deletions(-)
>>
>> The IDs itself look good but you are not adding only clock ID. You are
>> changing all of them from NULL-flags to CLK_SET_RATE_PARENT. This should
>> be explained in the commit message why you need it. Probably it should
>> be also in separate commit.
> 
> +1. And CLK_SET_RATE_PARENT for a clock which has a mux as its parent
> is a bit suspicious, so I'd like to know the rationale for each single
> clock with CLK_SET_RATE_PARENT being added.

This patch don't need the CLK_SET_RATE_PARENT flag. As Tomasz's comment,
the mux of divider's parent don't need this flag. Sorry for confusion.

I'll drop the CLK_SET_RATE_PARENT flag.

Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index be03ed0fcb6b..d7c62dfb1646 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -554,8 +554,9 @@  static struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
 };
 
 static struct samsung_div_clock exynos5800_div_clks[] __initdata = {
-	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
-
+	DIV_F(CLK_DOUT_ACLK400_WCORE, "dout_aclk400_wcore",
+			"mout_aclk400_wcore",
+			DIV_TOP0, 16, 3, CLK_SET_RATE_PARENT, 0),
 	DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
 				DIV_TOP8, 16, 3),
 	DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
@@ -607,8 +608,9 @@  static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
 };
 
 static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
-	DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
-			DIV_TOP0, 16, 3),
+	DIV_F(CLK_DOUT_ACLK400_WCORE, "dout_aclk400_wcore",
+			"mout_aclk400_wcore_bpll",
+			DIV_TOP0, 16, 3, CLK_SET_RATE_PARENT, 0),
 };
 
 static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
@@ -785,31 +787,52 @@  static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
 	DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
 	DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
 
-	DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
-	DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
-	DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
-	DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
-	DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
-	DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
-	DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
-
-	DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
-			DIV_TOP1, 0, 3),
-	DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
-			DIV_TOP1, 4, 3),
-	DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
-	DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
-			DIV_TOP1, 16, 3),
-	DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
-	DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
-	DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
-
-	DIV(0, "dout_aclk333_g2d", "mout_aclk333_g2d", DIV_TOP2, 8, 3),
-	DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
-	DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
-	DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
-	DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
-	DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
+	DIV_F(CLK_DOUT_ACLK400_ISP, "dout_aclk400_isp", "mout_aclk400_isp",
+			DIV_TOP0, 0, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK400_MSCL, "dout_aclk400_mscl", "mout_aclk400_mscl",
+			DIV_TOP0, 4, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK200, "dout_aclk200", "mout_aclk200",
+			DIV_TOP0, 8, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK200_FSYS2, "dout_aclk200_fsys2",
+			"mout_aclk200_fsys2",
+			DIV_TOP0, 12, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK100_NOC, "dout_aclk100_noc", "mout_aclk100_noc",
+			DIV_TOP0, 20, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_PCLK200_FSYS, "dout_pclk200_fsys", "mout_pclk200_fsys",
+			DIV_TOP0, 24, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK200_FSYS, "dout_aclk200_fsys", "mout_aclk200_fsys",
+			DIV_TOP0, 28, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK333_432_GSCL, "dout_aclk333_432_gscl",
+			"mout_aclk333_432_gscl",
+			DIV_TOP1, 0, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK333_432_ISP, "dout_aclk333_432_isp",
+			"mout_aclk333_432_isp",
+			DIV_TOP1, 4, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK66, "dout_aclk66", "mout_aclk66",
+			DIV_TOP1, 8, 6, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK333_432_ISP0, "dout_aclk333_432_isp0",
+			"mout_aclk333_432_isp0",
+			DIV_TOP1, 16, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK266, "dout_aclk266", "mout_aclk266",
+			DIV_TOP1, 20, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK166, "dout_aclk166", "mout_aclk166",
+			DIV_TOP1, 24, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK333, "dout_aclk333", "mout_aclk333",
+			DIV_TOP1, 28, 3, CLK_SET_RATE_PARENT, 0),
+
+	DIV_F(CLK_DOUT_ACLK333_G2D, "dout_aclk333_g2d", "mout_aclk333_g2d",
+			DIV_TOP2, 8, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK266_G2D, "dout_aclk266_g2d", "mout_aclk266_g2d",
+			DIV_TOP2, 12, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2,
+			16, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK300_JPEG, "dout_aclk300_jpeg", "mout_aclk300_jpeg",
+			DIV_TOP2, 20, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK300_DISP1, "dout_aclk300_disp1",
+			"mout_aclk300_disp1",
+			DIV_TOP2, 24, 3, CLK_SET_RATE_PARENT, 0),
+	DIV_F(CLK_DOUT_ACLK300_GSCL, "dout_aclk300_gscl", "mout_aclk300_gscl",
+			DIV_TOP2, 28, 3, CLK_SET_RATE_PARENT, 0),
 
 	/* DISP1 Block */
 	DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
@@ -817,7 +840,9 @@  static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
 	DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
 	DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
 	DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
-	DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
+	DIV_F(CLK_DOUT_ACLK400_DISP1, "dout_aclk400_disp1",
+			"mout_aclk400_disp1",
+			DIV_TOP2, 4, 3, CLK_SET_RATE_PARENT, 0),
 
 	/* Audio Block */
 	DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),