@@ -10,6 +10,7 @@
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
/ {
compatible = "renesas,r8a7795";
@@ -39,6 +40,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -47,6 +49,7 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x1>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -54,6 +57,7 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x2>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -61,6 +65,7 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x3>;
device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -68,12 +73,14 @@
L2_CA57: cache-controller@0 {
compatible = "cache";
+ power-domains = <&sysc R8A7795_PD_CA57_SCU>;
cache-unified;
cache-level = <2>;
};
L2_CA53: cache-controller@1 {
compatible = "cache";
+ power-domains = <&sysc R8A7795_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
@@ -305,6 +312,12 @@
#power-domain-cells = <0>;
};
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7795-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
audma0: dma-controller@ec700000 {
compatible = "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
Add a device node for the System Controller. Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2 caches/SCUs to their respective PM Domains. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v5: - Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain, v4: - Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain, - Extract using "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the always-on power area into a separate patch, v3: - Drop power area hiearchy from DT, - Switch to "#power-domain-cells = <1>", - Use "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the always-on power area, - Drop fallback compatibility strings, v2: - New. --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)