diff mbox

thermal: trivial: fix the typo

Message ID 1462277262-29935-1-git-send-email-wxt@rock-chips.com (mailing list archive)
State Accepted
Delegated to: Eduardo Valentin
Headers show

Commit Message

Caesar Wang May 3, 2016, 12:07 p.m. UTC
See the thermal code, the obvious typo from my editor.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

 Documentation/devicetree/bindings/thermal/thermal.txt | 10 +++++-----
 drivers/thermal/thermal_core.c                        |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

Comments

Rob Herring (Arm) May 4, 2016, 1:46 p.m. UTC | #1
On Tue, May 03, 2016 at 08:07:41PM +0800, Caesar Wang wrote:
> See the thermal code, the obvious typo from my editor.

It looks like whitespace changes, not typos. Please be specific.

> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> ---
> 
>  Documentation/devicetree/bindings/thermal/thermal.txt | 10 +++++-----
>  drivers/thermal/thermal_core.c                        |  2 +-
>  2 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
> index 41b817f..88b6ea1 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/thermal.txt
> @@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
>  Required properties:
>  - #cooling-cells:	Used to provide cooling device specific information
>    Type: unsigned	while referring to it. Must be at least 2, in order
> -  Size: one cell      	to specify minimum and maximum cooling state used
> +  Size: one cell	to specify minimum and maximum cooling state used
>  			in the reference. The first cell is the minimum
>  			cooling state requested and the second cell is
>  			the maximum cooling state requested in the reference.
> @@ -119,7 +119,7 @@ Required properties:
>  Optional property:
>  - contribution:		The cooling contribution to the thermal zone of the
>    Type: unsigned	referred cooling device at the referred trip point.
> -  Size: one cell      	The contribution is a ratio of the sum
> +  Size: one cell	The contribution is a ratio of the sum
>  			of all cooling contributions within a thermal zone.
>  
>  Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
> @@ -145,7 +145,7 @@ Required properties:
>    Size: one cell
>  
>  - thermal-sensors:	A list of thermal sensor phandles and sensor specifier
> -  Type: list of 	used while monitoring the thermal zone.
> +  Type: list of		used while monitoring the thermal zone.
>    phandles + sensor
>    specifier
>  
> @@ -473,7 +473,7 @@ thermal-zones {
>  				  <&adc>;	/* pcb north */
>  
>  		/* hotspot = 100 * bandgap - 120 * adc + 484 */
> -		coefficients = 		<100	-120	484>;
> +		coefficients =		<100	-120	484>;
>  
>  		trips {
>  			...
> @@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
>          thermal-sensors =  <&adc>;
>  
>  		/* hotspot = 1 * adc + 6000 */
> -	coefficients = 		<1	6000>;
> +	coefficients =		<1	6000>;
>  
>  (d) - Board thermal
>  
> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index e5bfbd3..26870ef 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -513,7 +513,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
>  		if (!ret && *temp < crit_temp)
>  			*temp = tz->emul_temperature;
>  	}
> - 
> +
>  	mutex_unlock(&tz->lock);
>  exit:
>  	return ret;
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 41b817f..88b6ea1 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -62,7 +62,7 @@  For more examples of cooling devices, refer to the example sections below.
 Required properties:
 - #cooling-cells:	Used to provide cooling device specific information
   Type: unsigned	while referring to it. Must be at least 2, in order
-  Size: one cell      	to specify minimum and maximum cooling state used
+  Size: one cell	to specify minimum and maximum cooling state used
 			in the reference. The first cell is the minimum
 			cooling state requested and the second cell is
 			the maximum cooling state requested in the reference.
@@ -119,7 +119,7 @@  Required properties:
 Optional property:
 - contribution:		The cooling contribution to the thermal zone of the
   Type: unsigned	referred cooling device at the referred trip point.
-  Size: one cell      	The contribution is a ratio of the sum
+  Size: one cell	The contribution is a ratio of the sum
 			of all cooling contributions within a thermal zone.
 
 Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@@ -145,7 +145,7 @@  Required properties:
   Size: one cell
 
 - thermal-sensors:	A list of thermal sensor phandles and sensor specifier
-  Type: list of 	used while monitoring the thermal zone.
+  Type: list of		used while monitoring the thermal zone.
   phandles + sensor
   specifier
 
@@ -473,7 +473,7 @@  thermal-zones {
 				  <&adc>;	/* pcb north */
 
 		/* hotspot = 100 * bandgap - 120 * adc + 484 */
-		coefficients = 		<100	-120	484>;
+		coefficients =		<100	-120	484>;
 
 		trips {
 			...
@@ -502,7 +502,7 @@  from the ADC sensor. The binding would be then:
         thermal-sensors =  <&adc>;
 
 		/* hotspot = 1 * adc + 6000 */
-	coefficients = 		<1	6000>;
+	coefficients =		<1	6000>;
 
 (d) - Board thermal
 
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index e5bfbd3..26870ef 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -513,7 +513,7 @@  int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 		if (!ret && *temp < crit_temp)
 			*temp = tz->emul_temperature;
 	}
- 
+
 	mutex_unlock(&tz->lock);
 exit:
 	return ret;