| Message ID | 1462481334-8943-4-git-send-email-chris.brand@broadcom.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, May 05, 2016 at 01:48:51PM -0700, Chris Brand wrote: > Add binding document for Broadcom BCM23550 SoC. > > BCM23550 has a Cluster Dormant Control IP block that holds cores > in an idle state. Introduce a new CPU enable method in which the CDC is > accessed to bring the core online. > > Signed-off-by: Chris Brand <chris.brand@broadcom.com> > --- > .../bindings/arm/bcm/brcm,bcm23550-cpu-method.txt | 36 ++++++++++++++++++++++ > .../devicetree/bindings/arm/bcm/brcm,bcm23550.txt | 15 +++++++++ > Documentation/devicetree/bindings/arm/cpus.txt | 1 + > 3 files changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt > create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt > > diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt > new file mode 100644 > index 000000000000..b1b16872bbca > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt > @@ -0,0 +1,36 @@ > +Broadcom Kona Family CPU Enable Method > +-------------------------------------- > +This binding defines the enable method used for starting secondary > +CPUs in the following Broadcom SoCs: > + BCM23550 > + > +The enable method is specified by defining the following required > +properties in the "cpu" device tree node: > + - enable-method = "brcm,bcm23550-cpu-method"; "-cpu-method" is a bit redundant. brcm,bc23550 is probably sufficient. > + - secondary-boot-reg = <...>; > + > +The secondary-boot-reg property is a u32 value that specifies the > +physical address of the register used to request the ROM holding pen > +code release a secondary CPU. The value written to the register is > +formed by encoding the target CPU id into the low bits of the > +physical start address it should jump to. -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, May 9, 2016 at 12:41 PM, Rob Herring <robh@kernel.org> wrote: > On Thu, May 05, 2016 at 01:48:51PM -0700, Chris Brand wrote: >> Add binding document for Broadcom BCM23550 SoC. [...] >> +The enable method is specified by defining the following required >> +properties in the "cpu" device tree node: >> + - enable-method = "brcm,bcm23550-cpu-method"; > > "-cpu-method" is a bit redundant. brcm,bc23550 is probably sufficient. Fair enough. Thanks, Rob! Chris -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt new file mode 100644 index 000000000000..b1b16872bbca --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt @@ -0,0 +1,36 @@ +Broadcom Kona Family CPU Enable Method +-------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM23550 + +The enable method is specified by defining the following required +properties in the "cpu" device tree node: + - enable-method = "brcm,bcm23550-cpu-method"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. The value written to the register is +formed by encoding the target CPU id into the low bits of the +physical start address it should jump to. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + enable-method = "brcm,bcm23550-cpu-method"; + secondary-boot-reg = <0x3500417c>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt new file mode 100644 index 000000000000..080baad923d6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt @@ -0,0 +1,15 @@ +Broadcom BCM23550 device tree bindings +-------------------------------------- + +This document describes the device tree bindings for boards with the BCM23550 +SoC. + +Required root node property: + - compatible: brcm,bcm23550 + +Example: + / { + model = "BCM23550 SoC"; + compatible = "brcm,bcm23550"; + [...] + } diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index ccc62f145306..8d63711139bd 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -194,6 +194,7 @@ nodes to be present and contain the properties described below. "allwinner,sun8i-a23" "arm,psci" "arm,realview-smp" + "brcm,bcm23550-cpu-method" "brcm,bcm-nsp-smp" "brcm,brahma-b15" "marvell,armada-375-smp"
Add binding document for Broadcom BCM23550 SoC. BCM23550 has a Cluster Dormant Control IP block that holds cores in an idle state. Introduce a new CPU enable method in which the CDC is accessed to bring the core online. Signed-off-by: Chris Brand <chris.brand@broadcom.com> --- .../bindings/arm/bcm/brcm,bcm23550-cpu-method.txt | 36 ++++++++++++++++++++++ .../devicetree/bindings/arm/bcm/brcm,bcm23550.txt | 15 +++++++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + 3 files changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt