diff mbox

[v3,13/15] dt/bindings: Add PSCI OS-Initiated PM Domains bindings

Message ID 1470351902-43103-14-git-send-email-lina.iyer@linaro.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Lina Iyer Aug. 4, 2016, 11:05 p.m. UTC 
Add bindings for defining a OS-Initiated based CPU PM domain.

Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
---
 Documentation/devicetree/bindings/arm/psci.txt | 64 ++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

Comments

Lina Iyer Aug. 5, 2016, 2:44 p.m. UTC | #1 
+devicetree

On Thu, Aug 04 2016 at 17:06 -0600, Lina Iyer wrote:
>Add bindings for defining a OS-Initiated based CPU PM domain.
>
>Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
>---
> Documentation/devicetree/bindings/arm/psci.txt | 64 ++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
>diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt
>index a2c4f1d..e1b2926 100644
>--- a/Documentation/devicetree/bindings/arm/psci.txt
>+++ b/Documentation/devicetree/bindings/arm/psci.txt
>@@ -105,7 +105,71 @@ Case 3: PSCI v0.2 and PSCI v0.1.
> 		...
> 	};
>
>+PSCI v1.0 onwards, supports OS-Initiated mode for powering off CPU domains
>+from the firmware. Such PM domains for which the PSCI firmware driver acts
>+as pseudo-controller, may also be specified in the DT along with the domain
>+idle states.
>+
>+The domain definitions must follow the domain idle state specifications per
>+[3].
>+
>+The domain idle states must be specified using the optional node -
>+
>+- domain-states
>+
>+The domain states themselves must be compatible with 'arm,idle-state' defined
>+in [1]  and need to specify the arm,psci-suspend-param property for each idle
>+state. More information on defining CPU PM domains is available in [4].
>+
>+Example: OS-Iniated PSCI based PM domains
>+
>+	cpus {
>+		#address-cells = <1>;
>+		#size-cells = <0>;
>+
>+		CPU0: cpu@0 {
>+			device_type = "cpu";
>+			compatible = "arm,cortex-a53", "arm,armv8";
>+			reg = <0x0>;
>+			enable-method = "psci";
>+			power-domains = <&CPU_PD>;
>+		};
>+	};
>+
>+	psci {
>+		compatible = "arm,psci-1.0";
>+		method = "smc";
>+
>+		CPU_PD: cpu-pd@0 {
>+			#power-domain-cells = <0>;
>+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWR_DWN>;
>+		};
>+
>+		domain-states {
>+			CLUSTER_RET: domain_ret {
>+				compatible = "arm,idle-state";
>+				arm,psci-suspend-param = <0x1000010>;
>+				entry-latency-us = <500>;
>+				exit-latency-us = <500>;
>+				min-residency-us = <2000>;
>+			};
>+
>+			CLUSTER_PWR_DWN: domain_gdhs {
>+				compatible = "arm,idle-state";
>+				arm,psci-suspend-param = <0x1000030>;
>+				entry-latency-us = <2000>;
>+				exit-latency-us = <2000>;
>+				min-residency-us = <6000>;
>+			};
>+		};
>+	};
>+
>+
> [1] Kernel documentation - ARM idle states bindings
>     Documentation/devicetree/bindings/arm/idle-states.txt
> [2] Power State Coordination Interface (PSCI) specification
>     http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
>+[3]. PM Domains description
>+    Documentation/devicetree/bindings/power/power_domain.txt
>+[4]. CPU PM Domains description
>+    Documentation/power/cpu_domains.txt
>-- 
>2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt
index a2c4f1d..e1b2926 100644
--- a/Documentation/devicetree/bindings/arm/psci.txt
+++ b/Documentation/devicetree/bindings/arm/psci.txt
@@ -105,7 +105,71 @@  Case 3: PSCI v0.2 and PSCI v0.1.
 		...
 	};
 
+PSCI v1.0 onwards, supports OS-Initiated mode for powering off CPU domains
+from the firmware. Such PM domains for which the PSCI firmware driver acts
+as pseudo-controller, may also be specified in the DT along with the domain
+idle states.
+
+The domain definitions must follow the domain idle state specifications per
+[3].
+
+The domain idle states must be specified using the optional node -
+
+- domain-states
+
+The domain states themselves must be compatible with 'arm,idle-state' defined
+in [1]  and need to specify the arm,psci-suspend-param property for each idle
+state. More information on defining CPU PM domains is available in [4].
+
+Example: OS-Iniated PSCI based PM domains
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD: cpu-pd@0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWR_DWN>;
+		};
+
+		domain-states {
+			CLUSTER_RET: domain_ret {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1000010>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWR_DWN: domain_gdhs {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1000030>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
+		};
+	};
+
+
 [1] Kernel documentation - ARM idle states bindings
     Documentation/devicetree/bindings/arm/idle-states.txt
 [2] Power State Coordination Interface (PSCI) specification
     http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
+[3]. PM Domains description
+    Documentation/devicetree/bindings/power/power_domain.txt
+[4]. CPU PM Domains description
+    Documentation/power/cpu_domains.txt