diff mbox

[v2,5/5] thermal: rockchip: handle set_trips without the trip points

Message ID 1479911374-22006-6-git-send-email-wxt@rock-chips.com (mailing list archive)
State Superseded, archived
Delegated to: Eduardo Valentin
Headers show

Commit Message

Caesar Wang Nov. 23, 2016, 2:29 p.m. UTC
In some cases, some sensors didn't need the trip points, the
set_trips will return {-INT_MAX, INT_MAX} to trigger thermal alarm.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

Changes in v2:
- Fixes something as Brian comments on
  https://patchwork.kernel.org/patch/9440989.

Changes in v1: None

 drivers/thermal/rockchip_thermal.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Comments

Brian Norris Nov. 23, 2016, 6:39 p.m. UTC | #1
On Wed, Nov 23, 2016 at 10:29:34PM +0800, Caesar Wang wrote:
> In some cases, some sensors didn't need the trip points, the
> set_trips will return {-INT_MAX, INT_MAX} to trigger thermal alarm.
> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> ---
> 
> Changes in v2:
> - Fixes something as Brian comments on
>   https://patchwork.kernel.org/patch/9440989.
> 
> Changes in v1: None

I think this looks better.

Reviewed-by: Brian Norris <briannorris@chromium.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 0d50df7..f873053 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -675,7 +675,21 @@  static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
 static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
 				  int chn, void __iomem *regs, int temp)
 {
-	u32 alarm_value, int_en;
+	u32 alarm_value;
+	u32 int_en, int_clr;
+
+	/*
+	 * In some cases, some sensors didn't need the trip points, the
+	 * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm
+	 * in the end, ignore this case and disable the high temperature
+	 * interrupt.
+	 */
+	if (temp == INT_MAX) {
+		int_clr = readl_relaxed(regs + TSADCV2_INT_EN);
+		int_clr &= ~TSADCV2_INT_SRC_EN(chn);
+		writel_relaxed(int_clr, regs + TSADCV2_INT_EN);
+		return 0;
+	}
 
 	/* Make sure the value is valid */
 	alarm_value = rk_tsadcv2_temp_to_code(table, temp);