@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
@@ -23,23 +24,37 @@
*/
#define ACT8945A_SYS_MODE 0x00
#define ACT8945A_SYS_CTRL 0x01
+#define ACT8945A_SYS_UNLK_REGS 0x0b
#define ACT8945A_DCDC1_VSET1 0x20
#define ACT8945A_DCDC1_VSET2 0x21
#define ACT8945A_DCDC1_CTRL 0x22
+#define ACT8945A_DCDC1_SUS 0x24
#define ACT8945A_DCDC2_VSET1 0x30
#define ACT8945A_DCDC2_VSET2 0x31
#define ACT8945A_DCDC2_CTRL 0x32
+#define ACT8945A_DCDC2_SUS 0x34
#define ACT8945A_DCDC3_VSET1 0x40
#define ACT8945A_DCDC3_VSET2 0x41
#define ACT8945A_DCDC3_CTRL 0x42
+#define ACT8945A_DCDC3_SUS 0x44
+
+#define ACT8945A_DCDC_MODE_MSK BIT(5)
+#define ACT8945A_DCDC_MODE_FIXED (1 << 5)
+#define ACT8945A_DCDC_MODE_POWER_SAVING (0 << 5)
+
+
#define ACT8945A_LDO1_VSET 0x50
#define ACT8945A_LDO1_CTRL 0x51
+#define ACT8945A_LDO1_SUS 0x52
#define ACT8945A_LDO2_VSET 0x54
#define ACT8945A_LDO2_CTRL 0x55
+#define ACT8945A_LDO2_SUS 0x56
#define ACT8945A_LDO3_VSET 0x60
#define ACT8945A_LDO3_CTRL 0x61
+#define ACT8945A_LDO3_SUS 0x62
#define ACT8945A_LDO4_VSET 0x64
#define ACT8945A_LDO4_CTRL 0x65
+#define ACT8945A_LDO4_SUS 0x66
/**
* Field Definitions.
@@ -63,12 +78,155 @@ enum {
ACT8945A_REG_NUM,
};
+struct act8945a_pmic {
+ struct regulator_dev *rdevs[ACT8945A_REG_NUM];
+ struct regmap *regmap;
+};
+
static const struct regulator_linear_range act8945a_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};
+
+static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id, ret, reg, val;
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_LDO1:
+ reg = ACT8945A_LDO1_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO2:
+ reg = ACT8945A_LDO2_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO3:
+ reg = ACT8945A_LDO3_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO4:
+ reg = ACT8945A_LDO4_SUS;
+ val = 0xe8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (enable)
+ val |= BIT(4);
+
+ /*
+ * Ask the PMIC to enable/disable this output when entering hibernate
+ * mode.
+ */
+ ret = regmap_write(regmap, reg, val);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Ask the PMIC to enter the suspend mode on the next PWRHLD
+ * transition.
+ */
+ return regmap_write(regmap, ACT8945A_SYS_CTRL, 0x42);
+}
+
+static int act8945a_set_suspend_enable(struct regulator_dev *rdev)
+{
+ return act8945a_set_suspend_state(rdev, true);
+}
+
+static int act8945a_set_suspend_disable(struct regulator_dev *rdev)
+{
+ return act8945a_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8945a_of_map_mode(unsigned int mode)
+{
+ if (mode == ACT8945A_DCDC_MODE_POWER_SAVING)
+ return REGULATOR_MODE_STANDBY;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id;
+ int reg, val;
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ val = ACT8945A_DCDC_MODE_POWER_SAVING;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = ACT8945A_DCDC_MODE_FIXED;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_CTRL;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_CTRL;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(regmap, reg, ACT8945A_DCDC_MODE_MSK, val);
+}
+
+static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id;
+ unsigned int val;
+ int reg;
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_CTRL;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_CTRL;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_read(regmap, reg, &val);
+
+ if ((val & ACT8945A_DCDC_MODE_MSK) == ACT8945A_DCDC_MODE_POWER_SAVING)
+ return REGULATOR_MODE_STANDBY;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
static struct regulator_ops act8945a_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -76,7 +234,11 @@ static struct regulator_ops act8945a_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8945a_set_mode,
+ .get_mode = act8945a_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8945a_set_suspend_enable,
+ .set_suspend_disable = act8945a_set_suspend_disable,
};
#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
@@ -84,6 +246,7 @@ static struct regulator_ops act8945a_ops = {
.name = _name, \
.supply_name = _supply, \
.of_match = of_match_ptr("REG_"#_id), \
+ .of_map_mode = act8945a_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.id = _family##_ID_##_id, \
.type = REGULATOR_VOLTAGE, \
@@ -118,14 +281,97 @@ static const struct regulator_desc act8945a_alt_regulators[] = {
ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"),
};
+static int act8945a_pmic_suspend(struct device *dev)
+{
+ struct act8945a_pmic *act8945a = dev_get_drvdata(dev);
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(act8945a->rdevs); i++) {
+ struct regulator_dev *rdev;
+
+ rdev = act8945a->rdevs[i];
+ if (!rdev)
+ break;
+
+ /*
+ * FIXME: maybe we should continue applying suspend state to
+ * other regulators.
+ */
+ ret = regulator_apply_suspend_state(rdev);
+ if (ret)
+ return ret;
+
+ act8945a->rdevs[i] = rdev;
+ }
+
+ return 0;
+}
+
+static int act8945a_pmic_resume(struct device *dev)
+{
+ struct act8945a_pmic *act8945a = dev_get_drvdata(dev);
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(act8945a->rdevs); i++) {
+ struct regulator_dev *rdev;
+
+ rdev = act8945a->rdevs[i];
+ if (!rdev)
+ break;
+
+ /*
+ * FIXME: maybe we should continue restoring runtime states on
+ * other regulators.
+ */
+ ret = regulator_restore_runtime_state(rdev);
+ if (ret)
+ return ret;
+
+ act8945a->rdevs[i] = rdev;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops act8945a_pmic_pm_ops = {
+ .suspend = act8945a_pmic_suspend,
+ .resume = act8945a_pmic_resume,
+};
+
+static void act8945a_pmic_shutdown(struct platform_device *pdev)
+{
+ struct act8945a_pmic *act8945a = platform_get_drvdata(pdev);
+ struct regmap *regmap = act8945a->regmap;
+
+ /*
+ * Ask the PMIC to shutdown everything on the next PWRHLD transition.
+ */
+ regmap_write(regmap, ACT8945A_SYS_CTRL, 0x0);
+}
+
static int act8945a_pmic_probe(struct platform_device *pdev)
{
struct regulator_config config = { };
const struct regulator_desc *regulators;
struct regulator_dev *rdev;
+ struct act8945a_pmic *act8945a;
int i, num_regulators;
bool voltage_select;
+ act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL);
+ if (!act8945a) {
+ dev_err(&pdev->dev,
+ "could not allocated the act8945a object\n");
+ return -ENOMEM;
+ }
+
+ act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!act8945a->regmap) {
+ dev_err(&pdev->dev,
+ "could not retrieve regmap from parent device\n");
+ return -EINVAL;
+ }
+
voltage_select = of_property_read_bool(pdev->dev.parent->of_node,
"active-semi,vsel-high");
@@ -147,16 +393,23 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
regulators[i].name);
return PTR_ERR(rdev);
}
+
+ act8945a->rdevs[i] = rdev;
}
- return 0;
+ platform_set_drvdata(pdev, act8945a);
+
+ /* Unlock expert registers. */
+ return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
}
static struct platform_driver act8945a_pmic_driver = {
.driver = {
.name = "act8945a-regulator",
+ .pm = &act8945a_pmic_pm_ops,
},
.probe = act8945a_pmic_probe,
+ .shutdown = act8945a_pmic_shutdown,
};
module_platform_driver(act8945a_pmic_driver);
The regulator supports a dedicated suspend mode. Implement the appropriate ->set_suspend_xx() hooks, add support for ->set_mode(), and provide basic PM ops (suspend/resume) to setup the regulator in a suspend state when the system is entering suspend. Note that this PMIC is not able to store a new voltage or a new mode in its internal suspend state description, which forces us to ask the regulator framework to apply suspend voltage and suspend mode at runtime (when calling regulator_apply_suspend_state()). We also implement the ->shutdown() method to make sure the PMIC will not enter the suspend state when the system is shutdown. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/regulator/act8945a-regulator.c | 255 ++++++++++++++++++++++++++++++++- 1 file changed, 254 insertions(+), 1 deletion(-)