diff mbox series

[V4,1/4] dt-bindings: fsl: scu: add thermal binding

Message ID 1543458696-4741-2-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Superseded, archived
Delegated to: Eduardo Valentin
Headers show
Series Add i.MX System Controller thermal driver support | expand

Commit Message

Anson Huang Nov. 29, 2018, 2:37 a.m. UTC
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
system controller, the system controller is in charge of system
power, clock and thermal sensors etc. management, Linux kernel
has to communicate with system controller via MU (message unit)
IPC to get temperature from thermal sensors, this patch adds
binding doc for i.MX system controller thermal driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
ChangeLog:
V3->V4:
  *move binding doc to SCU since it is belonging to SCU;
  *change compatile string to start with "fsl" instead of "nxp" to align with other nodes in dtb.
---
 .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Rob Herring (Arm) Dec. 7, 2018, 11:13 p.m. UTC | #1
On Thu, 29 Nov 2018 02:37:24 +0000, Anson Huang wrote:
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> system controller, the system controller is in charge of system
> power, clock and thermal sensors etc. management, Linux kernel
> has to communicate with system controller via MU (message unit)
> IPC to get temperature from thermal sensors, this patch adds
> binding doc for i.MX system controller thermal driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> ChangeLog:
> V3->V4:
>   *move binding doc to SCU since it is belonging to SCU;
>   *change compatile string to start with "fsl" instead of "nxp" to align with other nodes in dtb.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 3f3d697..b77ec29 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -112,6 +112,16 @@  RTC bindings based on SCU Message Protocol
 Required properties:
 - compatible: should be "fsl,imx8qxp-sc-rtc";
 
+Thermal bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible : Must be "fsl,imx8qxp-sc-thermal";
+- tsens-num : Total number of thermal sensors supported;
+- #thermal-sensor-cells : Should be 1. See
+			  Documentation/devicetree/bindings/thermal/thermal.txt
+			  for a description.
+
 Example (imx8qxp):
 -------------
 lsio_mu1: mailbox@5d1c0000 {
@@ -158,6 +168,12 @@  firmware {
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal";
+			tsens-num = <1>;
+			#thermal-sensor-cells = <1>;
+		};
 	};
 };