diff mbox series

[02/11] PM / devfreq: remove the invalid description for get_target_freq

Message ID 1615294733-22761-3-git-send-email-aisheng.dong@nxp.com (mailing list archive)
State New
Delegated to: Chanwoo Choi
Headers show
Series PM / devfreq: a few small fixes and improvements | expand

Commit Message

Dong Aisheng March 9, 2021, 12:58 p.m. UTC
First of all, no_central_polling was removed since
commit 7e6fdd4bad03 ("PM / devfreq: Core updates to support devices
which can idle")
Secondly, get_target_freq() is not only called only with update_devfreq()
notified by OPP now, but also min/max freq qos notifier.

So remove this invalid description now to avoid confusing.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
 drivers/devfreq/governor.h | 2 --
 1 file changed, 2 deletions(-)

Comments

Chanwoo Choi March 9, 2021, 3:02 p.m. UTC | #1
On 21. 3. 9. 오후 9:58, Dong Aisheng wrote:
> First of all, no_central_polling was removed since
> commit 7e6fdd4bad03 ("PM / devfreq: Core updates to support devices
> which can idle")
> Secondly, get_target_freq() is not only called only with update_devfreq()
> notified by OPP now, but also min/max freq qos notifier.
> 
> So remove this invalid description now to avoid confusing.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
>   drivers/devfreq/governor.h | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
> index 70f44b3ca42e..5cee3f64fe2b 100644
> --- a/drivers/devfreq/governor.h
> +++ b/drivers/devfreq/governor.h
> @@ -57,8 +57,6 @@
>    *			Basically, get_target_freq will run
>    *			devfreq_dev_profile.get_dev_status() to get the
>    *			status of the device (load = busy_time / total_time).
> - *			If no_central_polling is set, this callback is called
> - *			only with update_devfreq() notified by OPP.
>    * @event_handler:      Callback for devfreq core framework to notify events
>    *                      to governors. Events include per device governor
>    *                      init and exit, opp changes out of devfreq, suspend
> 

As I replied from patch1, I recommend that squash it with patch1.
Dong Aisheng March 9, 2021, 3:14 p.m. UTC | #2
On Tue, Mar 9, 2021 at 11:02 PM Chanwoo Choi <cwchoi00@gmail.com> wrote:
>
> On 21. 3. 9. 오후 9:58, Dong Aisheng wrote:
> > First of all, no_central_polling was removed since
> > commit 7e6fdd4bad03 ("PM / devfreq: Core updates to support devices
> > which can idle")
> > Secondly, get_target_freq() is not only called only with update_devfreq()
> > notified by OPP now, but also min/max freq qos notifier.
> >
> > So remove this invalid description now to avoid confusing.
> >
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > ---
> >   drivers/devfreq/governor.h | 2 --
> >   1 file changed, 2 deletions(-)
> >
> > diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
> > index 70f44b3ca42e..5cee3f64fe2b 100644
> > --- a/drivers/devfreq/governor.h
> > +++ b/drivers/devfreq/governor.h
> > @@ -57,8 +57,6 @@
> >    *                  Basically, get_target_freq will run
> >    *                  devfreq_dev_profile.get_dev_status() to get the
> >    *                  status of the device (load = busy_time / total_time).
> > - *                   If no_central_polling is set, this callback is called
> > - *                   only with update_devfreq() notified by OPP.
> >    * @event_handler:      Callback for devfreq core framework to notify events
> >    *                      to governors. Events include per device governor
> >    *                      init and exit, opp changes out of devfreq, suspend
> >
>
> As I replied from patch1, I recommend that squash it with patch1.

Got it, i will squash when sending the next version.
Thanks

Regards
Aisheng

>
> --
> Best Regards,
> Samsung Electronics
> Chanwoo Choi
diff mbox series

Patch

diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
index 70f44b3ca42e..5cee3f64fe2b 100644
--- a/drivers/devfreq/governor.h
+++ b/drivers/devfreq/governor.h
@@ -57,8 +57,6 @@ 
  *			Basically, get_target_freq will run
  *			devfreq_dev_profile.get_dev_status() to get the
  *			status of the device (load = busy_time / total_time).
- *			If no_central_polling is set, this callback is called
- *			only with update_devfreq() notified by OPP.
  * @event_handler:      Callback for devfreq core framework to notify events
  *                      to governors. Events include per device governor
  *                      init and exit, opp changes out of devfreq, suspend