diff mbox series

[V2,2/3] ARM: dts: qcom: Add device node support for TSENS in SC7280.

Message ID 1619202177-13485-3-git-send-email-rkambl@codeaurora.org (mailing list archive)
State New
Delegated to: Daniel Lezcano
Headers show
Series Add DT bindings and device tree nodes for TSENS in SC7280. | expand

Commit Message

Rajeshwari Ravindra Kamble April 23, 2021, 6:22 p.m. UTC
Added device node for TSENS controller and critical interrupt support in SC7280.

Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Matthias Kaehlcke April 26, 2021, 9:36 p.m. UTC | #1
On Fri, Apr 23, 2021 at 11:52:56PM +0530, Rajeshwari wrote:
> Added device node for TSENS controller and critical interrupt support in SC7280.

nit: use present tense to describe what a patch does

> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 2cc4785..275113c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -825,6 +825,28 @@ 
 			interrupt-controller;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sc7280-aoss-qmp";
 			reg = <0 0x0c300000 0 0x100000>;