Index: linux-pm/include/linux/pm_qos.h
===================================================================
--- linux-pm.orig/include/linux/pm_qos.h
+++ linux-pm/include/linux/pm_qos.h
@@ -33,6 +33,9 @@ enum pm_qos_flags_status {
 #define PM_QOS_NETWORK_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
 #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
 #define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE	0
+#define PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE	0
+#define PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT	(-1)
+#define PM_QOS_LATENCY_ANY			((s32)(~(__u32)0 >> 1))
 
 #define PM_QOS_FLAG_NO_POWER_OFF	(1 << 0)
 #define PM_QOS_FLAG_REMOTE_WAKEUP	(1 << 1)
@@ -50,6 +53,7 @@ struct pm_qos_flags_request {
 
 enum dev_pm_qos_req_type {
 	DEV_PM_QOS_RESUME_LATENCY = 1,
+	DEV_PM_QOS_LATENCY_TOLERANCE,
 	DEV_PM_QOS_FLAGS,
 };
 
@@ -89,8 +93,10 @@ struct pm_qos_flags {
 
 struct dev_pm_qos {
 	struct pm_qos_constraints resume_latency;
+	struct pm_qos_constraints latency_tolerance;
 	struct pm_qos_flags flags;
 	struct dev_pm_qos_request *resume_latency_req;
+	struct dev_pm_qos_request *latency_tolerance_req;
 	struct dev_pm_qos_request *flags_req;
 };
 
@@ -196,6 +202,8 @@ void dev_pm_qos_hide_latency_limit(struc
 int dev_pm_qos_expose_flags(struct device *dev, s32 value);
 void dev_pm_qos_hide_flags(struct device *dev);
 int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
+s32 dev_pm_qos_get_user_latency_tolerance(struct device *dev);
+int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val);
 
 static inline s32 dev_pm_qos_requested_resume_latency(struct device *dev)
 {
@@ -215,6 +223,10 @@ static inline int dev_pm_qos_expose_flag
 static inline void dev_pm_qos_hide_flags(struct device *dev) {}
 static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set)
 			{ return 0; }
+static inline s32 dev_pm_qos_get_user_latency_tolerance(struct device *dev)
+			{ return PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT; }
+static inline int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val)
+			{ return 0; }
 
 static inline s32 dev_pm_qos_requested_resume_latency(struct device *dev) { return 0; }
 static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; }
Index: linux-pm/drivers/base/power/qos.c
===================================================================
--- linux-pm.orig/drivers/base/power/qos.c
+++ linux-pm/drivers/base/power/qos.c
@@ -151,6 +151,14 @@ static int apply_constraint(struct dev_p
 						     req);
 		}
 		break;
+	case DEV_PM_QOS_LATENCY_TOLERANCE:
+		ret = pm_qos_update_target(&qos->latency_tolerance,
+					   &req->data.pnode, action, value);
+		if (ret) {
+			value = pm_qos_read_value(&qos->latency_tolerance);
+			req->dev->power.set_latency_tolerance(req->dev, value);
+		}
+		break;
 	case DEV_PM_QOS_FLAGS:
 		ret = pm_qos_update_flags(&qos->flags, &req->data.flr,
 					  action, value);
@@ -194,6 +202,13 @@ static int dev_pm_qos_constraints_alloca
 	c->type = PM_QOS_MIN;
 	c->notifiers = n;
 
+	c = &qos->latency_tolerance;
+	plist_head_init(&c->list);
+	c->target_value = PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE;
+	c->default_value = PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE;
+	c->no_constraint_value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT;
+	c->type = PM_QOS_MIN;
+
 	INIT_LIST_HEAD(&qos->flags.list);
 
 	spin_lock_irq(&dev->power.lock);
@@ -247,6 +262,11 @@ void dev_pm_qos_constraints_destroy(stru
 		apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
 		memset(req, 0, sizeof(*req));
 	}
+	c = &qos->latency_tolerance;
+	plist_for_each_entry_safe(req, tmp, &c->list, data.pnode) {
+		apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
+		memset(req, 0, sizeof(*req));
+	}
 	f = &qos->flags;
 	list_for_each_entry_safe(req, tmp, &f->list, data.flr.node) {
 		apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
@@ -266,6 +286,40 @@ void dev_pm_qos_constraints_destroy(stru
 	mutex_unlock(&dev_pm_qos_sysfs_mtx);
 }
 
+static bool dev_pm_qos_invalid_request(struct device *dev,
+				       struct dev_pm_qos_request *req)
+{
+	return !req || (req->type == DEV_PM_QOS_LATENCY_TOLERANCE
+			&& !dev->power.set_latency_tolerance);
+}
+
+static int __dev_pm_qos_add_request(struct device *dev,
+				    struct dev_pm_qos_request *req,
+				    enum dev_pm_qos_req_type type, s32 value)
+{
+	int ret = 0;
+
+	if (!dev || dev_pm_qos_invalid_request(dev, req))
+		return -EINVAL;
+
+	if (WARN(dev_pm_qos_request_active(req),
+		 "%s() called for already added request\n", __func__))
+		return -EINVAL;
+
+	if (IS_ERR(dev->power.qos))
+		ret = -ENODEV;
+	else if (!dev->power.qos)
+		ret = dev_pm_qos_constraints_allocate(dev);
+
+	trace_dev_pm_qos_add_request(dev_name(dev), type, value);
+	if (!ret) {
+		req->dev = dev;
+		req->type = type;
+		ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
+	}
+	return ret;
+}
+
 /**
  * dev_pm_qos_add_request - inserts new qos request into the list
  * @dev: target device for the constraint
@@ -291,31 +345,11 @@ void dev_pm_qos_constraints_destroy(stru
 int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
 			   enum dev_pm_qos_req_type type, s32 value)
 {
-	int ret = 0;
-
-	if (!dev || !req) /*guard against callers passing in null */
-		return -EINVAL;
-
-	if (WARN(dev_pm_qos_request_active(req),
-		 "%s() called for already added request\n", __func__))
-		return -EINVAL;
+	int ret;
 
 	mutex_lock(&dev_pm_qos_mtx);
-
-	if (IS_ERR(dev->power.qos))
-		ret = -ENODEV;
-	else if (!dev->power.qos)
-		ret = dev_pm_qos_constraints_allocate(dev);
-
-	trace_dev_pm_qos_add_request(dev_name(dev), type, value);
-	if (!ret) {
-		req->dev = dev;
-		req->type = type;
-		ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
-	}
-
+	ret = __dev_pm_qos_add_request(dev, req, type, value);
 	mutex_unlock(&dev_pm_qos_mtx);
-
 	return ret;
 }
 EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
@@ -343,6 +377,7 @@ static int __dev_pm_qos_update_request(s
 
 	switch(req->type) {
 	case DEV_PM_QOS_RESUME_LATENCY:
+	case DEV_PM_QOS_LATENCY_TOLERANCE:
 		curr_value = req->data.pnode.prio;
 		break;
 	case DEV_PM_QOS_FLAGS:
@@ -563,6 +598,10 @@ static void __dev_pm_qos_drop_user_reque
 		req = dev->power.qos->resume_latency_req;
 		dev->power.qos->resume_latency_req = NULL;
 		break;
+	case DEV_PM_QOS_LATENCY_TOLERANCE:
+		req = dev->power.qos->latency_tolerance_req;
+		dev->power.qos->latency_tolerance_req = NULL;
+		break;
 	case DEV_PM_QOS_FLAGS:
 		req = dev->power.qos->flags_req;
 		dev->power.qos->flags_req = NULL;
@@ -768,6 +807,67 @@ int dev_pm_qos_update_flags(struct devic
 	pm_runtime_put(dev);
 	return ret;
 }
+
+/**
+ * dev_pm_qos_get_user_latency_tolerance - Get user space latency tolerance.
+ * @dev: Device to obtain the user space latency tolerance for.
+ */
+s32 dev_pm_qos_get_user_latency_tolerance(struct device *dev)
+{
+	s32 ret;
+
+	mutex_lock(&dev_pm_qos_mtx);
+	ret = IS_ERR_OR_NULL(dev->power.qos)
+		|| !dev->power.qos->latency_tolerance_req ?
+			PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT :
+			dev->power.qos->latency_tolerance_req->data.pnode.prio;
+	mutex_unlock(&dev_pm_qos_mtx);
+	return ret;
+}
+
+/**
+ * dev_pm_qos_update_user_latency_tolerance - Update user space latency tolerance.
+ * @dev: Device to update the user space latency tolerance for.
+ * @val: New user space latency tolerance for @dev (negative values disable).
+ */
+int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val)
+{
+	int ret;
+
+	mutex_lock(&dev_pm_qos_mtx);
+
+	if (IS_ERR_OR_NULL(dev->power.qos)
+	    || !dev->power.qos->latency_tolerance_req) {
+		struct dev_pm_qos_request *req;
+
+		if (val < 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+		req = kzalloc(sizeof(*req), GFP_KERNEL);
+		if (!req) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		ret = __dev_pm_qos_add_request(dev, req, DEV_PM_QOS_LATENCY_TOLERANCE, val);
+		if (ret < 0) {
+			kfree(req);
+			goto out;
+		}
+		dev->power.qos->latency_tolerance_req = req;
+	} else {
+		if (val < 0) {
+			__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY_TOLERANCE);
+			ret = 0;
+		} else {
+			ret = __dev_pm_qos_update_request(dev->power.qos->latency_tolerance_req, val);
+		}
+	}
+
+ out:
+	mutex_unlock(&dev_pm_qos_mtx);
+	return ret;
+}
 #else /* !CONFIG_PM_RUNTIME */
 static void __dev_pm_qos_hide_latency_limit(struct device *dev) {}
 static void __dev_pm_qos_hide_flags(struct device *dev) {}
Index: linux-pm/drivers/base/power/sysfs.c
===================================================================
--- linux-pm.orig/drivers/base/power/sysfs.c
+++ linux-pm/drivers/base/power/sysfs.c
@@ -246,6 +246,40 @@ static ssize_t pm_qos_resume_latency_sto
 static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
 		   pm_qos_resume_latency_show, pm_qos_resume_latency_store);
 
+static ssize_t pm_qos_latency_tolerance_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	s32 value = dev_pm_qos_get_user_latency_tolerance(dev);
+
+	if (value < 0)
+		return sprintf(buf, "auto\n");
+	else if (value == PM_QOS_LATENCY_ANY)
+		return sprintf(buf, "any\n");
+
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t pm_qos_latency_tolerance_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t n)
+{
+	s32 value;
+	int ret;
+
+	if (kstrtos32(buf, 0, &value)) {
+		if (!strcmp(buf, "auto") || !strcmp(buf, "auto\n"))
+			value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT;
+		else if (!strcmp(buf, "any") || !strcmp(buf, "any\n"))
+			value = PM_QOS_LATENCY_ANY;
+	}
+	ret = dev_pm_qos_update_user_latency_tolerance(dev, value);
+	return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_latency_tolerance_us, 0644,
+		   pm_qos_latency_tolerance_show, pm_qos_latency_tolerance_store);
+
 static ssize_t pm_qos_no_power_off_show(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
@@ -631,6 +665,17 @@ static struct attribute_group pm_qos_res
 	.attrs	= pm_qos_resume_latency_attrs,
 };
 
+static struct attribute *pm_qos_latency_tolerance_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+	&dev_attr_pm_qos_latency_tolerance_us.attr,
+#endif /* CONFIG_PM_RUNTIME */
+	NULL,
+};
+static struct attribute_group pm_qos_latency_tolerance_attr_group = {
+	.name	= power_group_name,
+	.attrs	= pm_qos_latency_tolerance_attrs,
+};
+
 static struct attribute *pm_qos_flags_attrs[] = {
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_pm_qos_no_power_off.attr,
@@ -656,18 +701,23 @@ int dpm_sysfs_add(struct device *dev)
 		if (rc)
 			goto err_out;
 	}
-
 	if (device_can_wakeup(dev)) {
 		rc = sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
-		if (rc) {
-			if (pm_runtime_callbacks_present(dev))
-				sysfs_unmerge_group(&dev->kobj,
-						    &pm_runtime_attr_group);
-			goto err_out;
-		}
+		if (rc)
+			goto err_runtime;
+	}
+	if (dev->power.set_latency_tolerance) {
+		rc = sysfs_merge_group(&dev->kobj,
+				       &pm_qos_latency_tolerance_attr_group);
+		if (rc)
+			goto err_wakeup;
 	}
 	return 0;
 
+ err_wakeup:
+	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
+ err_runtime:
+	sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group);
  err_out:
 	sysfs_remove_group(&dev->kobj, &pm_attr_group);
 	return rc;
@@ -710,6 +760,7 @@ void rpm_sysfs_remove(struct device *dev
 
 void dpm_sysfs_remove(struct device *dev)
 {
+	sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_tolerance_attr_group);
 	dev_pm_qos_constraints_destroy(dev);
 	rpm_sysfs_remove(dev);
 	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
Index: linux-pm/include/linux/pm.h
===================================================================
--- linux-pm.orig/include/linux/pm.h
+++ linux-pm/include/linux/pm.h
@@ -582,6 +582,7 @@ struct dev_pm_info {
 	unsigned long		accounting_timestamp;
 #endif
 	struct pm_subsys_data	*subsys_data;  /* Owned by the subsystem. */
+	void (*set_latency_tolerance)(struct device *, s32);
 	struct dev_pm_qos	*qos;
 };
 
Index: linux-pm/kernel/power/qos.c
===================================================================
--- linux-pm.orig/kernel/power/qos.c
+++ linux-pm/kernel/power/qos.c
@@ -173,6 +173,7 @@ int pm_qos_update_target(struct pm_qos_c
 {
 	unsigned long flags;
 	int prev_value, curr_value, new_value;
+	int ret;
 
 	spin_lock_irqsave(&pm_qos_lock, flags);
 	prev_value = pm_qos_get_value(c);
@@ -208,13 +209,15 @@ int pm_qos_update_target(struct pm_qos_c
 
 	trace_pm_qos_update_target(action, prev_value, curr_value);
 	if (prev_value != curr_value) {
-		blocking_notifier_call_chain(c->notifiers,
-					     (unsigned long)curr_value,
-					     NULL);
-		return 1;
+		ret = 1;
+		if (c->notifiers)
+			blocking_notifier_call_chain(c->notifiers,
+						     (unsigned long)curr_value,
+						     NULL);
 	} else {
-		return 0;
+		ret = 0;
 	}
+	return ret;
 }
 
 /**
Index: linux-pm/Documentation/power/pm_qos_interface.txt
===================================================================
--- linux-pm.orig/Documentation/power/pm_qos_interface.txt
+++ linux-pm/Documentation/power/pm_qos_interface.txt
@@ -88,17 +88,19 @@ node.
 
 2. PM QoS per-device latency and flags framework
 
-For each device, there are two lists of PM QoS requests. One is maintained
-along with the aggregated target of resume latency value and the other is for
-PM QoS flags. Values are updated in response to changes of the request list.
-
-Target resume latency value is simply the minimum of the request values held in
-the parameter list elements.  The PM QoS flags aggregate value is a gather
-(bitwise OR) of all list elements' values.  Two device PM QoS flags are defined
-currently: PM_QOS_FLAG_NO_POWER_OFF and PM_QOS_FLAG_REMOTE_WAKEUP.
+For each device, there are three lists of PM QoS requests. Two of them are
+maintained along with the aggregated targets of resume latency and active
+state latency tolerance (in microseconds) and the third one is for PM QoS flags.
+Values are updated in response to changes of the request list.
+
+The target values of resume latency and active state latency tolerance are
+simply the minimum of the request values held in the parameter list elements.
+The PM QoS flags aggregate value is a gather (bitwise OR) of all list elements'
+values.  Two device PM QoS flags are defined currently: PM_QOS_FLAG_NO_POWER_OFF
+and PM_QOS_FLAG_REMOTE_WAKEUP.
 
-Note: the aggregated target value is implemented in such a way that reading the
-aggregated value does not require any locking mechanism.
+Note: The aggregated target values are implemented in such a way that reading
+the aggregated value does not require any locking mechanism.
 
 
 From kernel mode the use of this interface is the following:
@@ -177,3 +179,42 @@ The callback is called when the aggregat
 int dev_pm_qos_remove_global_notifier(notifier):
 Removes the notification callback function from the global notification tree
 of the framework.
+
+
+Active state latency tolerance
+
+This device PM QoS type is used to support systems in which hardware may switch
+to energy-saving operation modes on the fly.  In those systems, if the operation
+mode chosen by the hardware attempts to save energy in an overly aggressive way,
+it may cause excess latencies to be visible to software, causing it to miss
+certain protocol requirements or target frame or sample rates etc.
+
+If there is a latency tolerance control mechanism for a given device available
+to software, the .set_latency_tolerance callback in that device's dev_pm_info
+structure should be populated.  The routine pointed to by it is should implement
+whatever is necessary to transfer the effective requirement value to the
+hardware.
+
+Whenever the effective latency tolerance changes for the device, its
+.set_latency_tolerance() callback will be executed and the effective value will
+be passed to it.  If that value is negative, which means that the list of
+latency tolerance requirements for the device is empty, the callback is expected
+to switch the underlying hardware latency tolerance control mechanism to an
+autonomous mode if available.  If that value is PM_QOS_LATENCY_ANY, in turn, and
+the hardware supports a special "no requirement" setting, the callback is
+expected to use it.  That allows software to prevent the hardware from
+automatically updating the device's latency tolerance in response to its power
+state changes (e.g. during transitions from D3cold to D0), which generally may
+be done in the autonomous latency tolerance control mode.
+
+If .set_latency_tolerance() is present for the device, sysfs attribute
+pm_qos_latency_tolerance_us will be present in the devivce's power directory.
+Then, user space can use that attribute to specify its latency tolerance
+requirement for the device, if any.  Writing "any" to it means "no requirement,
+but do not let the hardware control latency tolerance" and writing "auto" to it
+allows the hardware to be switched to the autonomous mode if there are no other
+requirements from the kernel side in the device's list.
+
+Kernel code can use the functions described above along with the
+DEV_PM_QOS_LATENCY_TOLERANCE device PM QoS type to add, remove and update
+latency tolerance requirements for devices.
Index: linux-pm/Documentation/ABI/testing/sysfs-devices-power
===================================================================
--- linux-pm.orig/Documentation/ABI/testing/sysfs-devices-power
+++ linux-pm/Documentation/ABI/testing/sysfs-devices-power
@@ -187,7 +187,7 @@ Description:
 		Not all drivers support this attribute.  If it isn't supported,
 		attempts to read or write it will yield I/O errors.
 
-What:		/sys/devices/.../power/pm_qos_latency_us
+What:		/sys/devices/.../power/pm_qos_resume_latency_us
 Date:		March 2012
 Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
@@ -205,6 +205,31 @@ Description:
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
 
+What:		/sys/devices/.../power/pm_qos_latency_tolerance_us
+Date:		January 2014
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_latency_tolerance_us attribute
+		contains the PM QoS active state latency tolerance limit for the
+		given device in microseconds.  That is the maximum memory access
+		latency the device can suffer without any visible adverse
+		effects on user space functionality.  If that value is the
+		string "any", the latency does not matter to user space at all,
+		but hardware should not be allowed to set the latency tolerance
+		for the device automatically.
+
+		Reading "auto" from this file means that the maximum memory
+		access latency for the device may be determined automatically
+		by the hardware as needed.  Writing "auto" to it allows the
+		hardware to be switched to this mode if there are no other
+		latency tolerance requirements from the kernel side.
+
+		This attribute is only present if the feature controlled by it
+		is supported by the hardware.
+
+		This attribute has no effect on runtime suspend and resume of
+		devices and on system-wide suspend/resume and hibernation.
+
 What:		/sys/devices/.../power/pm_qos_no_power_off
 Date:		September 2012
 Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
