| Message ID | 1888343.tdWV9SEqCh@kreacher (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | thermal: Store trips table and ops in thermal_zone_device | expand |
On Mon, Feb 05, 2024 at 10:18:02PM +0100, Rafael J. Wysocki wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > The current code requires thermal zone creators to pass pointers to > writable ops to thermal_zone_device_register_with_trips() which needs > to modify the target struct thermal_zone_device_ops object if the > "critical" operation in it is NULL. > > Moreover, the callers of thermal_zone_device_register_with_trips() are > required to hold on to the struct thermal_zone_device_ops object passed > to it until the given thermal zone is unregistered. > > Both of these requirements are quite inconvenient, so modify struct > thermal_zone_device to contain struct thermal_zone_device_ops as field and > make thermal_zone_device_register_with_trips() copy the contents of the > struct thermal_zone_device_ops passed to it via a pointer (which can be > const now) to that field. Also adjust the code using thermal zone ops > accordingly. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> > --- > drivers/thermal/thermal_core.c | 40 +++++++++++++++++++------------------- > drivers/thermal/thermal_helpers.c | 10 ++++----- > drivers/thermal/thermal_hwmon.c | 4 +-- > drivers/thermal/thermal_sysfs.c | 12 +++++------ > drivers/thermal/thermal_trip.c | 4 +-- > include/linux/thermal.h | 6 ++--- > 6 files changed, 38 insertions(+), 38 deletions(-) > > Index: linux-pm/include/linux/thermal.h > =================================================================== > --- linux-pm.orig/include/linux/thermal.h > +++ linux-pm/include/linux/thermal.h > @@ -182,7 +182,7 @@ struct thermal_zone_device { > int prev_low_trip; > int prev_high_trip; > atomic_t need_update; > - struct thermal_zone_device_ops *ops; > + struct thermal_zone_device_ops ops; > struct thermal_zone_params *tzp; > struct thermal_governor *governor; > void *governor_data; > @@ -318,14 +318,14 @@ struct thermal_zone_device *thermal_zone > const struct thermal_trip *trips, > int num_trips, int mask, > void *devdata, > - struct thermal_zone_device_ops *ops, > + const struct thermal_zone_device_ops *ops, > const struct thermal_zone_params *tzp, > int passive_delay, int polling_delay); > > struct thermal_zone_device *thermal_tripless_zone_device_register( > const char *type, > void *devdata, > - struct thermal_zone_device_ops *ops, > + const struct thermal_zone_device_ops *ops, > const struct thermal_zone_params *tzp); > > void thermal_zone_device_unregister(struct thermal_zone_device *tz); > Index: linux-pm/drivers/thermal/thermal_core.c > =================================================================== > --- linux-pm.orig/drivers/thermal/thermal_core.c > +++ linux-pm/drivers/thermal/thermal_core.c > @@ -356,9 +356,9 @@ static void handle_critical_trips(struct > trace_thermal_zone_trip(tz, thermal_zone_trip_id(tz, trip), trip->type); > > if (trip->type == THERMAL_TRIP_CRITICAL) > - tz->ops->critical(tz); > - else if (tz->ops->hot) > - tz->ops->hot(tz); > + tz->ops.critical(tz); > + else if (tz->ops.hot) > + tz->ops.hot(tz); > } > > static void handle_thermal_trip(struct thermal_zone_device *tz, > @@ -493,8 +493,8 @@ static int thermal_zone_device_set_mode( > return ret; > } > > - if (tz->ops->change_mode) > - ret = tz->ops->change_mode(tz, mode); > + if (tz->ops.change_mode) > + ret = tz->ops.change_mode(tz, mode); > > if (!ret) > tz->mode = mode; > @@ -867,8 +867,8 @@ static void bind_cdev(struct thermal_coo > struct thermal_zone_device *pos = NULL; > > list_for_each_entry(pos, &thermal_tz_list, node) { > - if (pos->ops->bind) { > - ret = pos->ops->bind(pos, cdev); > + if (pos->ops.bind) { > + ret = pos->ops.bind(pos, cdev); > if (ret) > print_bind_err_msg(pos, cdev, ret); > } > @@ -1184,8 +1184,8 @@ void thermal_cooling_device_unregister(s > > /* Unbind all thermal zones associated with 'this' cdev */ > list_for_each_entry(tz, &thermal_tz_list, node) { > - if (tz->ops->unbind) > - tz->ops->unbind(tz, cdev); > + if (tz->ops.unbind) > + tz->ops.unbind(tz, cdev); > } > > mutex_unlock(&thermal_list_lock); > @@ -1199,13 +1199,13 @@ static void bind_tz(struct thermal_zone_ > int ret; > struct thermal_cooling_device *pos = NULL; > > - if (!tz->ops->bind) > + if (!tz->ops.bind) > return; > > mutex_lock(&thermal_list_lock); > > list_for_each_entry(pos, &thermal_cdev_list, node) { > - ret = tz->ops->bind(tz, pos); > + ret = tz->ops.bind(tz, pos); > if (ret) > print_bind_err_msg(tz, pos, ret); > } > @@ -1224,8 +1224,8 @@ int thermal_zone_get_crit_temp(struct th > { > int i, ret = -EINVAL; > > - if (tz->ops->get_crit_temp) > - return tz->ops->get_crit_temp(tz, temp); > + if (tz->ops.get_crit_temp) > + return tz->ops.get_crit_temp(tz, temp); > > if (!tz->trips) > return -EINVAL; > @@ -1276,7 +1276,7 @@ thermal_zone_device_register_with_trips( > const struct thermal_trip *trips, > int num_trips, int mask, > void *devdata, > - struct thermal_zone_device_ops *ops, > + const struct thermal_zone_device_ops *ops, > const struct thermal_zone_params *tzp, > int passive_delay, int polling_delay) > { > @@ -1350,10 +1350,10 @@ thermal_zone_device_register_with_trips( > tz->id = id; > strscpy(tz->type, type, sizeof(tz->type)); > > - if (!ops->critical) > - ops->critical = thermal_zone_device_critical; > + tz->ops = *ops; > + if (!tz->ops.critical) > + tz->ops.critical = thermal_zone_device_critical; > > - tz->ops = ops; > tz->device.class = thermal_class; > tz->devdata = devdata; > memcpy(tz->trips, trips, num_trips * sizeof(trips[0])); > @@ -1439,7 +1439,7 @@ EXPORT_SYMBOL_GPL(thermal_zone_device_re > struct thermal_zone_device *thermal_tripless_zone_device_register( > const char *type, > void *devdata, > - struct thermal_zone_device_ops *ops, > + const struct thermal_zone_device_ops *ops, > const struct thermal_zone_params *tzp) > { > return thermal_zone_device_register_with_trips(type, NULL, 0, 0, devdata, > @@ -1501,8 +1501,8 @@ void thermal_zone_device_unregister(stru > > /* Unbind all cdevs associated with 'this' thermal zone */ > list_for_each_entry(cdev, &thermal_cdev_list, node) > - if (tz->ops->unbind) > - tz->ops->unbind(tz, cdev); > + if (tz->ops.unbind) > + tz->ops.unbind(tz, cdev); > > mutex_unlock(&thermal_list_lock); > > Index: linux-pm/drivers/thermal/thermal_sysfs.c > =================================================================== > --- linux-pm.orig/drivers/thermal/thermal_sysfs.c > +++ linux-pm/drivers/thermal/thermal_sysfs.c > @@ -123,8 +123,8 @@ trip_point_temp_store(struct device *dev > trip = &tz->trips[trip_id]; > > if (temp != trip->temperature) { > - if (tz->ops->set_trip_temp) { > - ret = tz->ops->set_trip_temp(tz, trip_id, temp); > + if (tz->ops.set_trip_temp) { > + ret = tz->ops.set_trip_temp(tz, trip_id, temp); > if (ret) > goto unlock; > } > @@ -174,8 +174,8 @@ trip_point_hyst_store(struct device *dev > trip = &tz->trips[trip_id]; > > if (hyst != trip->hysteresis) { > - if (tz->ops->set_trip_hyst) { > - ret = tz->ops->set_trip_hyst(tz, trip_id, hyst); > + if (tz->ops.set_trip_hyst) { > + ret = tz->ops.set_trip_hyst(tz, trip_id, hyst); > if (ret) > goto unlock; > } > @@ -250,10 +250,10 @@ emul_temp_store(struct device *dev, stru > > mutex_lock(&tz->lock); > > - if (!tz->ops->set_emul_temp) > + if (!tz->ops.set_emul_temp) > tz->emul_temperature = temperature; > else > - ret = tz->ops->set_emul_temp(tz, temperature); > + ret = tz->ops.set_emul_temp(tz, temperature); > > if (!ret) > __thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); > Index: linux-pm/drivers/thermal/thermal_helpers.c > =================================================================== > --- linux-pm.orig/drivers/thermal/thermal_helpers.c > +++ linux-pm/drivers/thermal/thermal_helpers.c > @@ -26,8 +26,8 @@ int get_tz_trend(struct thermal_zone_dev > { > enum thermal_trend trend; > > - if (tz->emul_temperature || !tz->ops->get_trend || > - tz->ops->get_trend(tz, trip, &trend)) { > + if (tz->emul_temperature || !tz->ops.get_trend || > + tz->ops.get_trend(tz, trip, &trend)) { > if (tz->temperature > tz->last_temperature) > trend = THERMAL_TREND_RAISING; > else if (tz->temperature < tz->last_temperature) > @@ -75,7 +75,7 @@ EXPORT_SYMBOL(get_thermal_instance); > * temperature and fill @temp. > * > * Both tz and tz->ops must be valid pointers when calling this function, > - * and the tz->ops->get_temp callback must be provided. > + * and the tz->ops.get_temp callback must be provided. > * The function must be called under tz->lock. > * > * Return: On success returns 0, an error code otherwise > @@ -88,7 +88,7 @@ int __thermal_zone_get_temp(struct therm > > lockdep_assert_held(&tz->lock); > > - ret = tz->ops->get_temp(tz, temp); > + ret = tz->ops.get_temp(tz, temp); > > if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) { > for_each_trip(tz, trip) { > @@ -132,7 +132,7 @@ int thermal_zone_get_temp(struct thermal > > mutex_lock(&tz->lock); > > - if (!tz->ops->get_temp) { > + if (!tz->ops.get_temp) { > ret = -EINVAL; > goto unlock; > } > Index: linux-pm/drivers/thermal/thermal_trip.c > =================================================================== > --- linux-pm.orig/drivers/thermal/thermal_trip.c > +++ linux-pm/drivers/thermal/thermal_trip.c > @@ -70,7 +70,7 @@ void __thermal_zone_set_trips(struct the > > lockdep_assert_held(&tz->lock); > > - if (!tz->ops->set_trips) > + if (!tz->ops.set_trips) > return; > > for_each_trip(tz, trip) { > @@ -114,7 +114,7 @@ void __thermal_zone_set_trips(struct the > * Set a temperature window. When this window is left the driver > * must inform the thermal core via thermal_zone_device_update. > */ > - ret = tz->ops->set_trips(tz, low, high); > + ret = tz->ops.set_trips(tz, low, high); > if (ret) > dev_err(&tz->device, "Failed to set trips: %d\n", ret); > } > Index: linux-pm/drivers/thermal/thermal_hwmon.c > =================================================================== > --- linux-pm.orig/drivers/thermal/thermal_hwmon.c > +++ linux-pm/drivers/thermal/thermal_hwmon.c > @@ -80,7 +80,7 @@ temp_crit_show(struct device *dev, struc > > mutex_lock(&tz->lock); > > - ret = tz->ops->get_crit_temp(tz, &temperature); > + ret = tz->ops.get_crit_temp(tz, &temperature); > > mutex_unlock(&tz->lock); > > @@ -132,7 +132,7 @@ thermal_hwmon_lookup_temp(const struct t > static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz) > { > int temp; > - return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp); > + return tz->ops.get_crit_temp && !tz->ops.get_crit_temp(tz, &temp); > } > > int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) > > >
Index: linux-pm/include/linux/thermal.h =================================================================== --- linux-pm.orig/include/linux/thermal.h +++ linux-pm/include/linux/thermal.h @@ -182,7 +182,7 @@ struct thermal_zone_device { int prev_low_trip; int prev_high_trip; atomic_t need_update; - struct thermal_zone_device_ops *ops; + struct thermal_zone_device_ops ops; struct thermal_zone_params *tzp; struct thermal_governor *governor; void *governor_data; @@ -318,14 +318,14 @@ struct thermal_zone_device *thermal_zone const struct thermal_trip *trips, int num_trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops, + const struct thermal_zone_device_ops *ops, const struct thermal_zone_params *tzp, int passive_delay, int polling_delay); struct thermal_zone_device *thermal_tripless_zone_device_register( const char *type, void *devdata, - struct thermal_zone_device_ops *ops, + const struct thermal_zone_device_ops *ops, const struct thermal_zone_params *tzp); void thermal_zone_device_unregister(struct thermal_zone_device *tz); Index: linux-pm/drivers/thermal/thermal_core.c =================================================================== --- linux-pm.orig/drivers/thermal/thermal_core.c +++ linux-pm/drivers/thermal/thermal_core.c @@ -356,9 +356,9 @@ static void handle_critical_trips(struct trace_thermal_zone_trip(tz, thermal_zone_trip_id(tz, trip), trip->type); if (trip->type == THERMAL_TRIP_CRITICAL) - tz->ops->critical(tz); - else if (tz->ops->hot) - tz->ops->hot(tz); + tz->ops.critical(tz); + else if (tz->ops.hot) + tz->ops.hot(tz); } static void handle_thermal_trip(struct thermal_zone_device *tz, @@ -493,8 +493,8 @@ static int thermal_zone_device_set_mode( return ret; } - if (tz->ops->change_mode) - ret = tz->ops->change_mode(tz, mode); + if (tz->ops.change_mode) + ret = tz->ops.change_mode(tz, mode); if (!ret) tz->mode = mode; @@ -867,8 +867,8 @@ static void bind_cdev(struct thermal_coo struct thermal_zone_device *pos = NULL; list_for_each_entry(pos, &thermal_tz_list, node) { - if (pos->ops->bind) { - ret = pos->ops->bind(pos, cdev); + if (pos->ops.bind) { + ret = pos->ops.bind(pos, cdev); if (ret) print_bind_err_msg(pos, cdev, ret); } @@ -1184,8 +1184,8 @@ void thermal_cooling_device_unregister(s /* Unbind all thermal zones associated with 'this' cdev */ list_for_each_entry(tz, &thermal_tz_list, node) { - if (tz->ops->unbind) - tz->ops->unbind(tz, cdev); + if (tz->ops.unbind) + tz->ops.unbind(tz, cdev); } mutex_unlock(&thermal_list_lock); @@ -1199,13 +1199,13 @@ static void bind_tz(struct thermal_zone_ int ret; struct thermal_cooling_device *pos = NULL; - if (!tz->ops->bind) + if (!tz->ops.bind) return; mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_cdev_list, node) { - ret = tz->ops->bind(tz, pos); + ret = tz->ops.bind(tz, pos); if (ret) print_bind_err_msg(tz, pos, ret); } @@ -1224,8 +1224,8 @@ int thermal_zone_get_crit_temp(struct th { int i, ret = -EINVAL; - if (tz->ops->get_crit_temp) - return tz->ops->get_crit_temp(tz, temp); + if (tz->ops.get_crit_temp) + return tz->ops.get_crit_temp(tz, temp); if (!tz->trips) return -EINVAL; @@ -1276,7 +1276,7 @@ thermal_zone_device_register_with_trips( const struct thermal_trip *trips, int num_trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops, + const struct thermal_zone_device_ops *ops, const struct thermal_zone_params *tzp, int passive_delay, int polling_delay) { @@ -1350,10 +1350,10 @@ thermal_zone_device_register_with_trips( tz->id = id; strscpy(tz->type, type, sizeof(tz->type)); - if (!ops->critical) - ops->critical = thermal_zone_device_critical; + tz->ops = *ops; + if (!tz->ops.critical) + tz->ops.critical = thermal_zone_device_critical; - tz->ops = ops; tz->device.class = thermal_class; tz->devdata = devdata; memcpy(tz->trips, trips, num_trips * sizeof(trips[0])); @@ -1439,7 +1439,7 @@ EXPORT_SYMBOL_GPL(thermal_zone_device_re struct thermal_zone_device *thermal_tripless_zone_device_register( const char *type, void *devdata, - struct thermal_zone_device_ops *ops, + const struct thermal_zone_device_ops *ops, const struct thermal_zone_params *tzp) { return thermal_zone_device_register_with_trips(type, NULL, 0, 0, devdata, @@ -1501,8 +1501,8 @@ void thermal_zone_device_unregister(stru /* Unbind all cdevs associated with 'this' thermal zone */ list_for_each_entry(cdev, &thermal_cdev_list, node) - if (tz->ops->unbind) - tz->ops->unbind(tz, cdev); + if (tz->ops.unbind) + tz->ops.unbind(tz, cdev); mutex_unlock(&thermal_list_lock); Index: linux-pm/drivers/thermal/thermal_sysfs.c =================================================================== --- linux-pm.orig/drivers/thermal/thermal_sysfs.c +++ linux-pm/drivers/thermal/thermal_sysfs.c @@ -123,8 +123,8 @@ trip_point_temp_store(struct device *dev trip = &tz->trips[trip_id]; if (temp != trip->temperature) { - if (tz->ops->set_trip_temp) { - ret = tz->ops->set_trip_temp(tz, trip_id, temp); + if (tz->ops.set_trip_temp) { + ret = tz->ops.set_trip_temp(tz, trip_id, temp); if (ret) goto unlock; } @@ -174,8 +174,8 @@ trip_point_hyst_store(struct device *dev trip = &tz->trips[trip_id]; if (hyst != trip->hysteresis) { - if (tz->ops->set_trip_hyst) { - ret = tz->ops->set_trip_hyst(tz, trip_id, hyst); + if (tz->ops.set_trip_hyst) { + ret = tz->ops.set_trip_hyst(tz, trip_id, hyst); if (ret) goto unlock; } @@ -250,10 +250,10 @@ emul_temp_store(struct device *dev, stru mutex_lock(&tz->lock); - if (!tz->ops->set_emul_temp) + if (!tz->ops.set_emul_temp) tz->emul_temperature = temperature; else - ret = tz->ops->set_emul_temp(tz, temperature); + ret = tz->ops.set_emul_temp(tz, temperature); if (!ret) __thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); Index: linux-pm/drivers/thermal/thermal_helpers.c =================================================================== --- linux-pm.orig/drivers/thermal/thermal_helpers.c +++ linux-pm/drivers/thermal/thermal_helpers.c @@ -26,8 +26,8 @@ int get_tz_trend(struct thermal_zone_dev { enum thermal_trend trend; - if (tz->emul_temperature || !tz->ops->get_trend || - tz->ops->get_trend(tz, trip, &trend)) { + if (tz->emul_temperature || !tz->ops.get_trend || + tz->ops.get_trend(tz, trip, &trend)) { if (tz->temperature > tz->last_temperature) trend = THERMAL_TREND_RAISING; else if (tz->temperature < tz->last_temperature) @@ -75,7 +75,7 @@ EXPORT_SYMBOL(get_thermal_instance); * temperature and fill @temp. * * Both tz and tz->ops must be valid pointers when calling this function, - * and the tz->ops->get_temp callback must be provided. + * and the tz->ops.get_temp callback must be provided. * The function must be called under tz->lock. * * Return: On success returns 0, an error code otherwise @@ -88,7 +88,7 @@ int __thermal_zone_get_temp(struct therm lockdep_assert_held(&tz->lock); - ret = tz->ops->get_temp(tz, temp); + ret = tz->ops.get_temp(tz, temp); if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) { for_each_trip(tz, trip) { @@ -132,7 +132,7 @@ int thermal_zone_get_temp(struct thermal mutex_lock(&tz->lock); - if (!tz->ops->get_temp) { + if (!tz->ops.get_temp) { ret = -EINVAL; goto unlock; } Index: linux-pm/drivers/thermal/thermal_trip.c =================================================================== --- linux-pm.orig/drivers/thermal/thermal_trip.c +++ linux-pm/drivers/thermal/thermal_trip.c @@ -70,7 +70,7 @@ void __thermal_zone_set_trips(struct the lockdep_assert_held(&tz->lock); - if (!tz->ops->set_trips) + if (!tz->ops.set_trips) return; for_each_trip(tz, trip) { @@ -114,7 +114,7 @@ void __thermal_zone_set_trips(struct the * Set a temperature window. When this window is left the driver * must inform the thermal core via thermal_zone_device_update. */ - ret = tz->ops->set_trips(tz, low, high); + ret = tz->ops.set_trips(tz, low, high); if (ret) dev_err(&tz->device, "Failed to set trips: %d\n", ret); } Index: linux-pm/drivers/thermal/thermal_hwmon.c =================================================================== --- linux-pm.orig/drivers/thermal/thermal_hwmon.c +++ linux-pm/drivers/thermal/thermal_hwmon.c @@ -80,7 +80,7 @@ temp_crit_show(struct device *dev, struc mutex_lock(&tz->lock); - ret = tz->ops->get_crit_temp(tz, &temperature); + ret = tz->ops.get_crit_temp(tz, &temperature); mutex_unlock(&tz->lock); @@ -132,7 +132,7 @@ thermal_hwmon_lookup_temp(const struct t static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz) { int temp; - return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp); + return tz->ops.get_crit_temp && !tz->ops.get_crit_temp(tz, &temp); } int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)