@@ -82,9 +82,11 @@
compatible = "arm,cortex-a15";
reg = <0>;
- operating-points-v2 = <&cpu0_opp_table>;
- ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
- ti,syscon-rev = <&scm_wkup 0x204>;
+ operating-points = <
+ /* kHz uV */
+ 1000000 1060000
+ 1176000 1160000
+ >;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@@ -98,24 +100,6 @@
};
};
- cpu0_opp_table: opp_table0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp_nom@1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <1060000 850000 1150000>;
- opp-supported-hw = <0xFF 0x01>;
- opp-suspend;
- };
-
- opp_od@1176000000 {
- opp-hz = /bits/ 64 <1176000000>;
- opp-microvolt = <1160000 885000 1160000>;
- opp-supported-hw = <0xFF 0x02>;
- };
- };
-
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -17,7 +17,6 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
- operating-points-v2 = <&cpu0_opp_table>;
};
};
This reverts commit f80bc97fd0a9711ef11bdb3e63c2c01115a82c47. The original commit updated the cpufreq operating points tables for dra7xx but was merged before the driver making use of the node was merged, which breaks the existing cpufreq implementation on the system, so revert the patch until the ti-cpufreq driver is merged. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> --- arch/arm/boot/dts/dra7.dtsi | 26 +++++--------------------- arch/arm/boot/dts/dra74x.dtsi | 1 - 2 files changed, 5 insertions(+), 22 deletions(-)