diff mbox

[v5,1/3] dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq

Message ID 20161027210536.98988-2-code@mmayer.net (mailing list archive)
State Accepted, archived
Delegated to: Rafael Wysocki
Headers show

Commit Message

Markus Mayer Oct. 27, 2016, 9:05 p.m. UTC
From: Markus Mayer <mmayer@broadcom.com>

Add the binding document for the new brcmstb-avs-cpufreq driver.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt     | 78 ++++++++++++++++++++++
 MAINTAINERS                                        |  7 ++
 2 files changed, 85 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt

Comments

Rob Herring (Arm) Oct. 31, 2016, 5:43 a.m. UTC | #1
On Thu, Oct 27, 2016 at 02:05:34PM -0700, Markus Mayer wrote:
> From: Markus Mayer <mmayer@broadcom.com>
> 
> Add the binding document for the new brcmstb-avs-cpufreq driver.
> 
> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  .../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt     | 78 ++++++++++++++++++++++
>  MAINTAINERS                                        |  7 ++
>  2 files changed, 85 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt

I guess if one of the nodes is used elsewhere, combining the nodes 
doesn't make sense. So:

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Markus Mayer Oct. 31, 2016, 4:37 p.m. UTC | #2
On 30 October 2016 at 22:43, Rob Herring <robh@kernel.org> wrote:
> On Thu, Oct 27, 2016 at 02:05:34PM -0700, Markus Mayer wrote:
>> From: Markus Mayer <mmayer@broadcom.com>
>>
>> Add the binding document for the new brcmstb-avs-cpufreq driver.
>>
>> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>  .../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt     | 78 ++++++++++++++++++++++
>>  MAINTAINERS                                        |  7 ++
>>  2 files changed, 85 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
>
> I guess if one of the nodes is used elsewhere, combining the nodes
> doesn't make sense. So:
>
> Acked-by: Rob Herring <robh@kernel.org>

Thanks, Rob.

The series, with Acks added, is also available here:
https://github.com/mmayer/linux/tree/upstream-avs-cpufreq-4.9-v5

Regards,
-Markus
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
new file mode 100644
index 0000000..af23857
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -0,0 +1,78 @@ 
+Broadcom AVS mail box and interrupt register bindings
+=====================================================
+
+A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
+references the mailbox register used to communicate with the AVS CPU[1]. The
+second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
+the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
+command sent to it by a driver. Interrupting the AVS CPU is mandatory for
+commands to be processed.
+
+The interface also requires a reference to the AVS host interrupt controller,
+so a driver can react to interrupts generated by the AVS CPU whenever a command
+has been processed. See [2] for more information on the brcm,l2-intc node.
+
+[1] The AVS CPU is an independent co-processor that runs proprietary
+firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
+Adaptive Voltage Scaling.
+
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+
+
+Node brcm,avs-cpu-data-mem
+--------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-data-mem and
+              should include: one of brcm,bcm7271-avs-cpu-data-mem or
+                              brcm,bcm7268-avs-cpu-data-mem
+- reg: Specifies base physical address and size of the registers.
+- interrupts: The interrupt that the AVS CPU will use to interrupt the host
+              when a command completed.
+- interrupt-parent: The interrupt controller the above interrupt is routed
+                    through.
+- interrupt-names: The name of the interrupt used to interrupt the host.
+
+Optional properties:
+- None
+
+Node brcm,avs-cpu-l2-intr
+-------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-l2-intr and
+              should include: one of brcm,bcm7271-avs-cpu-l2-intr or
+                              brcm,bcm7268-avs-cpu-l2-intr
+- reg: Specifies base physical address and size of the registers.
+
+Optional properties:
+- None
+
+
+Example
+=======
+
+	avs_host_l2_intc: interrupt-controller@f04d1200 {
+		#interrupt-cells = <1>;
+		compatible = "brcm,l2-intc";
+		interrupt-parent = <&intc>;
+		reg = <0xf04d1200 0x48>;
+		interrupt-controller;
+		interrupts = <0x0 0x19 0x0>;
+		interrupt-names = "avs";
+	};
+
+	avs-cpu-data-mem@f04c4000 {
+		compatible = "brcm,bcm7271-avs-cpu-data-mem",
+				"brcm,avs-cpu-data-mem";
+		reg = <0xf04c4000 0x60>;
+		interrupts = <0x1a>;
+		interrupt-parent = <&avs_host_l2_intc>;
+		interrupt-names = "sw_intr";
+	};
+
+	avs-cpu-l2-intr@f04d1100 {
+		compatible = "brcm,bcm7271-avs-cpu-l2-intr",
+				"brcm,avs-cpu-l2-intr";
+		reg = <0xf04d1100 0x10>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1cd38a7..9379aca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2738,6 +2738,13 @@  L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/brcmnand/
 
+BROADCOM STB AVS CPUFREQ DRIVER
+M:	Markus Mayer <mmayer@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+
 BROADCOM SPECIFIC AMBA DRIVER (BCMA)
 M:	Rafał Miłecki <zajec5@gmail.com>
 L:	linux-wireless@vger.kernel.org