| Message ID | 20170203172929.23940-3-d-gerlach@ti.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Rafael Wysocki |
| Headers | show |
On Fri, Feb 3, 2017 at 11:29 AM, Dave Gerlach <d-gerlach@ti.com> wrote: > Add the device tree bindings document for the TI CPUFreq/OPP driver > on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 > binding allows us to provide an opp-supported-hw property for each OPP > to define when it is available. This driver is responsible for reading > and parsing registers to determine which OPPs can be selectively enabled > based on the specific SoC in use by matching against the opp-supported-hw > data. > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > Signed-off-by: Dave Gerlach <d-gerlach@ti.com> > --- [...] > +/* > + * cpu0 has different OPPs depending on SoC revision and some on revisions > + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not > + */ > +cpu0_opp_table: opp_table { One step closer, but as I showed last time, use a '-', not '_'. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/08/2017 08:44 AM, Rob Herring wrote: > On Fri, Feb 3, 2017 at 11:29 AM, Dave Gerlach <d-gerlach@ti.com> wrote: >> Add the device tree bindings document for the TI CPUFreq/OPP driver >> on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 >> binding allows us to provide an opp-supported-hw property for each OPP >> to define when it is available. This driver is responsible for reading >> and parsing registers to determine which OPPs can be selectively enabled >> based on the specific SoC in use by matching against the opp-supported-hw >> data. >> >> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> >> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> >> --- > > [...] > >> +/* >> + * cpu0 has different OPPs depending on SoC revision and some on revisions >> + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not >> + */ >> +cpu0_opp_table: opp_table { > > One step closer, but as I showed last time, use a '-', not '_'. I apologize I thought the comment was only about the 0, completely missed the underscore, you are correct, thanks. Regards, Dave > > Rob > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday, February 08, 2017 08:45:55 AM Dave Gerlach wrote: > On 02/08/2017 08:44 AM, Rob Herring wrote: > > On Fri, Feb 3, 2017 at 11:29 AM, Dave Gerlach <d-gerlach@ti.com> wrote: > >> Add the device tree bindings document for the TI CPUFreq/OPP driver > >> on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 > >> binding allows us to provide an opp-supported-hw property for each OPP > >> to define when it is available. This driver is responsible for reading > >> and parsing registers to determine which OPPs can be selectively enabled > >> based on the specific SoC in use by matching against the opp-supported-hw > >> data. > >> > >> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > >> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> > >> --- > > > > [...] > > > >> +/* > >> + * cpu0 has different OPPs depending on SoC revision and some on revisions > >> + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not > >> + */ > >> +cpu0_opp_table: opp_table { > > > > One step closer, but as I showed last time, use a '-', not '_'. > > I apologize I thought the comment was only about the 0, completely missed the > underscore, you are correct, thanks. Please send an update of this patch, then. Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/08/2017 06:02 PM, Rafael J. Wysocki wrote: > On Wednesday, February 08, 2017 08:45:55 AM Dave Gerlach wrote: >> On 02/08/2017 08:44 AM, Rob Herring wrote: >>> On Fri, Feb 3, 2017 at 11:29 AM, Dave Gerlach <d-gerlach@ti.com> wrote: >>>> Add the device tree bindings document for the TI CPUFreq/OPP driver >>>> on AM33xx, AM43xx, DRA7xx, and AM57xx SoCs. The operating-points-v2 >>>> binding allows us to provide an opp-supported-hw property for each OPP >>>> to define when it is available. This driver is responsible for reading >>>> and parsing registers to determine which OPPs can be selectively enabled >>>> based on the specific SoC in use by matching against the opp-supported-hw >>>> data. >>>> >>>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> >>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> >>>> --- >>> >>> [...] >>> >>>> +/* >>>> + * cpu0 has different OPPs depending on SoC revision and some on revisions >>>> + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not >>>> + */ >>>> +cpu0_opp_table: opp_table { >>> >>> One step closer, but as I showed last time, use a '-', not '_'. >> >> I apologize I thought the comment was only about the 0, completely missed the >> underscore, you are correct, thanks. > > Please send an update of this patch, then. Yes, sent an update of just this patch in reply to the original patch email, thanks. Regards, Dave > > Thanks, > Rafael > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt new file mode 100644 index 000000000000..d35b87a2e33f --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -0,0 +1,128 @@ +TI CPUFreq and OPP bindings +================================ + +Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx +families support different OPPs depending on the silicon variant in use. +The ti-cpufreq driver can use revision and an efuse value from the SoC to +provide the OPP framework with supported hardware information. This is +used to determine which OPPs from the operating-points-v2 table get enabled +when it is parsed by the OPP framework. + +Required properties: +-------------------- +In 'cpus' nodes: +- operating-points-v2: Phandle to the operating-points-v2 table to use. + +In 'operating-points-v2' table: +- compatible: Should be + - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs +- syscon: A phandle pointing to a syscon node representing the control module + register space of the SoC. + +Optional properties: +-------------------- +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + 1. Which revision of the SoC the OPP is supported by + 2. Which eFuse bits indicate this OPP is available + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +Example: +-------- + +/* From arch/arm/boot/dts/am33xx.dtsi */ +cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; +}; + +/* + * cpu0 has different OPPs depending on SoC revision and some on revisions + * 0x2 and 0x4 have eFuse bits that indicate if they are available or not + */ +cpu0_opp_table: opp_table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + /* + * The three following nodes are marked with opp-suspend + * because they can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; +};