@@ -3,7 +3,7 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
@@ -24,6 +24,10 @@ config REGMAP_SPMI
tristate
depends on SPMI
+config REGMAP_W1
+ tristate
+ depends on W1
+
config REGMAP_MMIO
tristate
@@ -10,3 +10,4 @@ obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o
obj-$(CONFIG_REGMAP_MMIO) += regmap-mmio.o
obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o
+obj-$(CONFIG_REGMAP_W1) += regmap-w1.o
new file mode 100644
@@ -0,0 +1,245 @@
+/*
+ * Register map access API - W1 (1-Wire) support
+ *
+ * Copyright (C) 2017 OAO Radioavionica
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/regmap.h>
+#include <linux/module.h>
+#include "../../w1/w1.h"
+
+#include "internal.h"
+
+#define W1_CMD_READ_DATA 0x69
+#define W1_CMD_WRITE_DATA 0x6C
+
+/*
+ * 1-Wire slaves registers with addess 8 bit and data 8 bit
+ */
+
+static int w1_reg_a8_v8_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_READ_DATA);
+ w1_write_8(sl->master, reg);
+ *val = w1_read_8(sl->master);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static int w1_reg_a8_v8_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_WRITE_DATA);
+ w1_write_8(sl->master, reg);
+ w1_write_8(sl->master, val);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+/*
+ * 1-Wire slaves registers with addess 8 bit and data 16 bit
+ */
+
+static int w1_reg_a8_v16_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_READ_DATA);
+ w1_write_8(sl->master, reg);
+ *val = w1_read_8(sl->master);
+ *val |= w1_read_8(sl->master)<<8;
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static int w1_reg_a8_v16_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 255)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_WRITE_DATA);
+ w1_write_8(sl->master, reg);
+ w1_write_8(sl->master, val & 0x00FF);
+ w1_write_8(sl->master, val>>8 & 0x00FF);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+/*
+ * 1-Wire slaves registers with addess 16 bit and data 16 bit
+ */
+
+static int w1_reg_a16_v16_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 65535)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_READ_DATA);
+ w1_write_8(sl->master, reg & 0x00FF);
+ w1_write_8(sl->master, reg>>8 & 0x00FF);
+ *val = w1_read_8(sl->master);
+ *val |= w1_read_8(sl->master)<<8;
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static int w1_reg_a16_v16_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct device *dev = context;
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret = 0;
+
+ if (reg > 65535)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+ if (!w1_reset_select_slave(sl)) {
+ w1_write_8(sl->master, W1_CMD_WRITE_DATA);
+ w1_write_8(sl->master, reg & 0x00FF);
+ w1_write_8(sl->master, reg>>8 & 0x00FF);
+ w1_write_8(sl->master, val & 0x00FF);
+ w1_write_8(sl->master, val>>8 & 0x00FF);
+ } else {
+ ret = -ENODEV;
+ }
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+/*
+ * Various types of supported bus addressing
+ */
+
+static struct regmap_bus regmap_w1_bus_a8_v8 = {
+ .reg_read = w1_reg_a8_v8_read,
+ .reg_write = w1_reg_a8_v8_write,
+};
+
+static struct regmap_bus regmap_w1_bus_a8_v16 = {
+ .reg_read = w1_reg_a8_v16_read,
+ .reg_write = w1_reg_a8_v16_write,
+};
+
+static struct regmap_bus regmap_w1_bus_a16_v16 = {
+ .reg_read = w1_reg_a16_v16_read,
+ .reg_write = w1_reg_a16_v16_write,
+};
+
+static const struct regmap_bus *regmap_get_w1_bus(struct device *w1_dev,
+ const struct regmap_config *config)
+{
+ if (config->reg_bits == 8 && config->val_bits == 8)
+ return ®map_w1_bus_a8_v8;
+
+ if (config->reg_bits == 8 && config->val_bits == 16)
+ return ®map_w1_bus_a8_v16;
+
+ if (config->reg_bits == 16 && config->val_bits == 16)
+ return ®map_w1_bus_a16_v16;
+
+ return ERR_PTR(-ENOTSUPP);
+}
+
+struct regmap *__regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+
+ const struct regmap_bus *bus = regmap_get_w1_bus(w1_dev, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __regmap_init(w1_dev, bus, w1_dev, config,
+ lock_key, lock_name);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__regmap_init_w1);
+
+struct regmap *__devm_regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+
+ const struct regmap_bus *bus = regmap_get_w1_bus(w1_dev, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __devm_regmap_init(w1_dev, bus, w1_dev, config,
+ lock_key, lock_name);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_w1);
+
+MODULE_LICENSE("GPL");
@@ -461,6 +461,10 @@ struct regmap *__regmap_init_spmi_ext(struct spmi_device *dev,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config,
@@ -493,6 +497,10 @@ struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *dev,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__devm_regmap_init_w1(struct device *w1_dev,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__devm_regmap_init_mmio_clk(struct device *dev,
const char *clk_id,
void __iomem *regs,
@@ -597,6 +605,19 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
dev, config)
/**
+ * regmap_init_w1() - Initialise register map
+ *
+ * @w1_dev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_w1(w1_dev, config) \
+ __regmap_lockdep_wrapper(__regmap_init_w1, #config, \
+ w1_dev, config)
+
+/**
* regmap_init_mmio_clk() - Initialise register map with register clock
*
* @dev: Device that will be interacted with
@@ -712,6 +733,19 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
dev, config)
/**
+ * devm_regmap_init_w1() - Initialise managed register map
+ *
+ * @w1_dev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_w1(w1_dev, config) \
+ __regmap_lockdep_wrapper(__devm_regmap_init_w1, #config, \
+ w1_dev, config)
+/**
* devm_regmap_init_mmio_clk() - Initialise managed register map with clock
*
* @dev: Device that will be interacted with