@@ -285,6 +285,13 @@
gpio-ranges = <&ap_pinctrl 0 0 20>;
};
};
+
+ ap_thermal: thermal@6f808C {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x6f808C 0x4>,
+ <0x6f8084 0x8>;
+ marvell,thermal-zone-name = "ap_thermal_zone";
+ };
};
};
};
@@ -182,6 +182,13 @@
interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
+ cpm_thermal: thermal@400078 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x400078 0x4>,
+ <0x400070 0x8>;
+ marvell,thermal-zone-name = "cp0_thermal_zone";
+ };
+
cpm_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x2000>;
@@ -182,6 +182,13 @@
interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
+ cps_thermal: thermal@400078 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x400078 0x4>,
+ <0x400070 0x8>;
+ marvell,thermal-zone-name = "cp1_thermal_zone";
+ };
+
cps_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x2000>;
Add thermal DT nodes in AP806 and CP110 master/slave DTSI files. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 7 +++++++ arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 7 +++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 7 +++++++ 3 files changed, 21 insertions(+)