| Message ID | 20180627115301.21330-6-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed 27 Jun 04:53 PDT 2018, Vinod Koul wrote: > Resin is similar to pwrkey, add the description and example > for resin bindings > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > .../devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 + > Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 14 ++++++++++++-- > 2 files changed, 13 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt > index bf719396eadd..34ab5763f494 100644 > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt > @@ -7,6 +7,7 @@ PROPERTIES > Value type: <string> > Definition: must be one of: > "qcom,pm8941-pwrkey" > + "qcom,pm8941-resin" > > - reg: > Usage: required > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > index f32cdd358267..651491bb63b7 100644 > --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt > @@ -1,9 +1,9 @@ > Qualcomm PON Device > > The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey > -along with the Android reboot-mode. > +and resin along with the Android reboot-mode. > > -This DT node has pwrkey as sub node. > +This DT node has pwrkey and resin as sub nodes. > > Required Properties: > -compatible: "qcom,pm8916-pon" > @@ -12,6 +12,8 @@ Required Properties: > Optional subnode: > -pwrkey: Specifies the subnode pwrkey and should follow the > qcom,pm8941-pwrkey.txt description. > +-resin: Specifies the subnode resin and should follow the > + qcom,pm8xxx-pwrkey.txt description. > > The rest of the properties should follow the generic reboot-mode description > found in reboot-mode.txt > @@ -32,4 +34,12 @@ Example: > bias-pull-up; > linux,code = <KEY_POWER>; > }; > + > + resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > }; > -- > 2.14.4 >
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt index bf719396eadd..34ab5763f494 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt @@ -7,6 +7,7 @@ PROPERTIES Value type: <string> Definition: must be one of: "qcom,pm8941-pwrkey" + "qcom,pm8941-resin" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt index f32cdd358267..651491bb63b7 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt @@ -1,9 +1,9 @@ Qualcomm PON Device The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey -along with the Android reboot-mode. +and resin along with the Android reboot-mode. -This DT node has pwrkey as sub node. +This DT node has pwrkey and resin as sub nodes. Required Properties: -compatible: "qcom,pm8916-pon" @@ -12,6 +12,8 @@ Required Properties: Optional subnode: -pwrkey: Specifies the subnode pwrkey and should follow the qcom,pm8941-pwrkey.txt description. +-resin: Specifies the subnode resin and should follow the + qcom,pm8xxx-pwrkey.txt description. The rest of the properties should follow the generic reboot-mode description found in reboot-mode.txt @@ -32,4 +34,12 @@ Example: bias-pull-up; linux,code = <KEY_POWER>; }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; };
Resin is similar to pwrkey, add the description and example for resin bindings Signed-off-by: Vinod Koul <vkoul@kernel.org> --- .../devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 + Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 14 ++++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-)