diff mbox

droid 4 in v4.18-rc: grep -r adasfasd /sys/ oopses

Message ID 20180709102852.GA20580@amd (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Pavel Machek July 9, 2018, 10:28 a.m. UTC 
Hi!

> > grep in /sys produces a nasty oops:
> > 
> > I guess next step is trying to find out which file that is..
> 
> Let me see...
> 
> openat(6, "suspend",
> O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW) = 4
> fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
> read(4, 0x4d2000, 32768)                = -1 EINVAL (Invalid argument)
> write(2, "grep: ", 6grep: )                   = 6
> write(2, "/sys/kernel/debug/pm_debug/cefus"...,
> 47/sys/kernel/debug/pm_debug/cefuse_pwrdm/suspend) = 47
> write(2, ": Invalid argument", 18: Invalid argument)      = 18
> write(2, "\n", 1
> )                       = 1
> close(4)                                = 0
> close(6)                                = 0
> openat(5, "time", O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW)
> = 4
> fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> read(4, "cefuse_pwrdm (OFF),OFF:641441757"..., 32768) = 849
> read(4, "", 28672)                      = 0
> close(4)                                = 0
> openat(5, "count",
> O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW) = 4
> Connection to usb closed by remote host.
> Connection to usb closed.
> pavel@half:~$
> 
> Ok, so it seems to be:
> 
> user@devuan:~$ cat /sys/kernel/debug/pm_debug/count
> (oops).
> 
> The file seems to be world-readable.
> 
> user@devuan:~$ ls -al /sys/kernel/debug/pm_debug/count
> -r--r--r-- 1 root root 0 Jan  1  1970 /sys/kernel/debug/pm_debug/count
> 
> But on PC, that file does not exist.

Ok, it is easier to reproduce like this:

sudo mount /dev/zero -t debugfs /sys/kernel/debug/
sudo cat /sys/kernel/debug/pm_debug/count

I tried adding debugging like this:

But it seems to crash outside show_counter function:

[  100.345062] cpcap-usb-phy cpcap-usb-phy.0: connected to USB host
[  102.049743] cmp...
[  102.051910] printf...
[  102.054351] done...
[  102.056579] cmp...
[  102.058685] printf...
...
[  102.319427] printf...
[  102.323211] done...
[  102.326843] ------------[ cut here ]------------
[  102.333190] WARNING: CPU: 0 PID: 2360 at
drivers/bus/omap_l3_noc.c:147 l3_int
errupt_handler+0x23c/0x380
[  102.344696] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2
(Read): Da
ta Access in User mode during Functional access

								Pavel

Comments

Pavel Machek July 9, 2018, 10:49 a.m. UTC | #1 
Hi!

> > > grep in /sys produces a nasty oops:
> > > 
> > > I guess next step is trying to find out which file that is..
> > 
> > Let me see...
> > 
> > openat(6, "suspend",
> > O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW) = 4
> > fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
> > read(4, 0x4d2000, 32768)                = -1 EINVAL (Invalid argument)
> > write(2, "grep: ", 6grep: )                   = 6
> > write(2, "/sys/kernel/debug/pm_debug/cefus"...,
> > 47/sys/kernel/debug/pm_debug/cefuse_pwrdm/suspend) = 47
> > write(2, ": Invalid argument", 18: Invalid argument)      = 18
> > write(2, "\n", 1
> > )                       = 1
> > close(4)                                = 0
> > close(6)                                = 0
> > openat(5, "time", O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW)
> > = 4
> > fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> > read(4, "cefuse_pwrdm (OFF),OFF:641441757"..., 32768) = 849
> > read(4, "", 28672)                      = 0
> > close(4)                                = 0
> > openat(5, "count",
> > O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW) = 4
> > Connection to usb closed by remote host.
> > Connection to usb closed.
> > pavel@half:~$
> > 
> > Ok, so it seems to be:
> > 
> > user@devuan:~$ cat /sys/kernel/debug/pm_debug/count
> > (oops).
> > 
> > The file seems to be world-readable.
> > 
> > user@devuan:~$ ls -al /sys/kernel/debug/pm_debug/count
> > -r--r--r-- 1 root root 0 Jan  1  1970 /sys/kernel/debug/pm_debug/count
> > 
> > But on PC, that file does not exist.
> 
> Ok, it is easier to reproduce like this:
> 
> sudo mount /dev/zero -t debugfs /sys/kernel/debug/
> sudo cat /sys/kernel/debug/pm_debug/count
> 
> I tried adding debugging like this:

Confused.


>  	seq_printf(s, "%s->%s (%d)\n", clkdm->name, clkdm->pwrdm.ptr->name,
>  		   clkdm->usecount);

I replaced seq_prinf with printk, and it still crashes, after
producing reasonable output.

[   74.852508] cmp...
[   74.855773] printf...
[   74.859313] l4_cfg_clkdm->core_pwrdm (0)
[   74.864532] done...
[   74.867889] cmp...
[   74.871154] printf...
[   74.874694] l4_cefuse_clkdm->cefuse_pwrdm (0)
[   74.880340] done...
[   74.883728] ------------[ cut here ]------------
[   74.889709] WARNING: CPU: 0 PID: 2127 at
drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x23c/0x380
[   74.900695] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2
(Read): Data Access in User mode during Functional access
[   74.915222] Modules linked in:
[   74.919982] CPU: 0 PID: 2127 Comm: cat Not tainted
4.18.0-rc4-88970-gf075a2c-dirty #763
[   74.929870] Hardware name: Generic OMAP4 (Flattened Device Tree)
[   74.937805] [<c010f6cc>] (unwind_backtrace) from [<c010ba50>]
(show_stack+0x10/0x14)

									Pavel
Andy Shevchenko July 9, 2018, 11:25 a.m. UTC | #2 
On Mon, 2018-07-09 at 12:49 +0200, Pavel Machek wrote:
> Hi!
> 
> > > > grep in /sys produces a nasty oops:
> > > > 
> > > > I guess next step is trying to find out which file that is..
> > > 
> > > Let me see...
> > > 
> > > openat(6, "suspend",
> > > O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW) = 4
> > > fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
> > > read(4, 0x4d2000, 32768)                = -1 EINVAL (Invalid
> > > argument)
> > > write(2, "grep: ", 6grep: )                   = 6
> > > write(2, "/sys/kernel/debug/pm_debug/cefus"...,
> > > 47/sys/kernel/debug/pm_debug/cefuse_pwrdm/suspend) = 47
> > > write(2, ": Invalid argument", 18: Invalid argument)      = 18
> > > write(2, "\n", 1
> > > )                       = 1
> > > close(4)                                = 0
> > > close(6)                                = 0
> > > openat(5, "time",
> > > O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW)
> > > = 4
> > > fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
> > > read(4, "cefuse_pwrdm (OFF),OFF:641441757"..., 32768) = 849
> > > read(4, "", 28672)                      = 0
> > > close(4)                                = 0
> > > openat(5, "count",
> > > O_RDONLY|O_NOCTTY|O_NONBLOCK|O_LARGEFILE|O_NOFOLLOW) = 4
> > > Connection to usb closed by remote host.
> > > Connection to usb closed.
> > > pavel@half:~$
> > > 
> > > Ok, so it seems to be:
> > > 
> > > user@devuan:~$ cat /sys/kernel/debug/pm_debug/count
> > > (oops).
> > > 
> > > The file seems to be world-readable.
> > > 
> > > user@devuan:~$ ls -al /sys/kernel/debug/pm_debug/count
> > > -r--r--r-- 1 root root 0 Jan  1  1970
> > > /sys/kernel/debug/pm_debug/count
> > > 
> > > But on PC, that file does not exist.
> > 
> > Ok, it is easier to reproduce like this:
> > 
> > sudo mount /dev/zero -t debugfs /sys/kernel/debug/
> > sudo cat /sys/kernel/debug/pm_debug/count
> > 
> > I tried adding debugging like this:
> 
> Confused.
> 
> 
> >  	seq_printf(s, "%s->%s (%d)\n", clkdm->name, clkdm-
> > >pwrdm.ptr->name,
> >  		   clkdm->usecount);
> 
> I replaced seq_prinf with printk, and it still crashes, after
> producing reasonable output.
> 

You need to add printk to the show function as well. It might be last
item in the list which is problematic (or one after cefuse CLK domain.

> [   74.852508] cmp...
> [   74.855773] printf...
> [   74.859313] l4_cfg_clkdm->core_pwrdm (0)
> [   74.864532] done...
> [   74.867889] cmp...
> [   74.871154] printf...
> [   74.874694] l4_cefuse_clkdm->cefuse_pwrdm (0)
> [   74.880340] done...
> [   74.883728] ------------[ cut here ]------------
> [   74.889709] WARNING: CPU: 0 PID: 2127 at
> drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x23c/0x380
> [   74.900695] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2
> (Read): Data Access in User mode during Functional access
> [   74.915222] Modules linked in:
> [   74.919982] CPU: 0 PID: 2127 Comm: cat Not tainted
> 4.18.0-rc4-88970-gf075a2c-dirty #763
> [   74.929870] Hardware name: Generic OMAP4 (Flattened Device Tree)
> [   74.937805] [<c010f6cc>] (unwind_backtrace) from [<c010ba50>]
> (show_stack+0x10/0x14)
> 
> 									
> Pavel
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index cba72de..ed98da8 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -78,14 +78,17 @@  static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
 
+	printk("cmp...\n");
 	if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
 		strcmp(clkdm->name, "wkup_clkdm") == 0 ||
 		strncmp(clkdm->name, "dpll", 4) == 0)
 		return 0;
 
+	printk("printf...\n");	
 	seq_printf(s, "%s->%s (%d)\n", clkdm->name, clkdm->pwrdm.ptr->name,
 		   clkdm->usecount);
 
+	printk("done...\n");	
 	return 0;
 }