diff mbox series

[v16,4/5] dt-bindings: arm-smmu: Add bindings for qcom,smmu-v2

Message ID 20180830144541.17740-5-vivek.gautam@codeaurora.org (mailing list archive)
State Not Applicable, archived
Headers show
Series iommu/arm-smmu: Add runtime pm/sleep support | expand

Commit Message

Vivek Gautam Aug. 30, 2018, 2:45 p.m. UTC 
Add bindings doc for Qcom's smmu-v2 implementation.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)

Comments

Vivek Gautam Sept. 6, 2018, 3:52 a.m. UTC | #1 
Hi Rob,

On Thu, Aug 30, 2018 at 8:16 PM Vivek Gautam
<vivek.gautam@codeaurora.org> wrote:
>
> Add bindings doc for Qcom's smmu-v2 implementation.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---

I removed your reviewed-by for this particular patch.
Can you please consider giving your review if you find the changes okay now.
Thanks.

Best regards
Vivek

>  .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 8a6ffce12af5..a6504b37cc21 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -17,10 +17,16 @@ conditions.
>                          "arm,mmu-401"
>                          "arm,mmu-500"
>                          "cavium,smmu-v2"
> +                        "qcom,smmu-v2"
>
>                    depending on the particular implementation and/or the
>                    version of the architecture implemented.
>
> +                  Qcom SoCs must contain, as below, SoC-specific compatibles
> +                  along with "qcom,smmu-v2":
> +                  "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
> +                  "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
> +
>  - reg           : Base address and size of the SMMU.
>
>  - #global-interrupts : The number of global interrupts exposed by the
> @@ -71,6 +77,22 @@ conditions.
>                    or using stream matching with #iommu-cells = <2>, and
>                    may be ignored if present in such cases.
>
> +- clock-names:    List of the names of clocks input to the device. The
> +                  required list depends on particular implementation and
> +                  is as follows:
> +                  - for "qcom,smmu-v2":
> +                    - "bus": clock required for downstream bus access and
> +                             for the smmu ptw,
> +                    - "iface": clock required to access smmu's registers
> +                               through the TCU's programming interface.
> +                  - unspecified for other implementations.
> +
> +- clocks:         Specifiers for all clocks listed in the clock-names property,
> +                  as per generic clock bindings.
> +
> +- power-domains:  Specifiers for power domains required to be powered on for
> +                  the SMMU to operate, as per generic power domain bindings.
> +
>  ** Deprecated properties:
>
>  - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> @@ -137,3 +159,20 @@ conditions.
>                  iommu-map = <0 &smmu3 0 0x400>;
>                  ...
>          };
> +
> +       /* Qcom's arm,smmu-v2 implementation */
> +       smmu4: iommu@d00000 {
> +               compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
> +               reg = <0xd00000 0x10000>;
> +
> +               #global-interrupts = <1>;
> +               interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +                            <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +                            <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +               #iommu-cells = <1>;
> +               power-domains = <&mmcc MDSS_GDSC>;
> +
> +               clocks = <&mmcc SMMU_MDP_AXI_CLK>,
> +                        <&mmcc SMMU_MDP_AHB_CLK>;
> +               clock-names = "bus", "iface";
> +       };
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
Rob Herring (Arm) Sept. 10, 2018, 6:02 p.m. UTC | #2 
On Thu, 30 Aug 2018 20:15:40 +0530, Vivek Gautam wrote:
> Add bindings doc for Qcom's smmu-v2 implementation.
> 
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Vivek Gautam Sept. 11, 2018, 8:34 a.m. UTC | #3 
On Mon, Sep 10, 2018 at 11:32 PM Rob Herring <robh@kernel.org> wrote:
>
> On Thu, 30 Aug 2018 20:15:40 +0530, Vivek Gautam wrote:
> > Add bindings doc for Qcom's smmu-v2 implementation.
> >
> > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> > Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> > Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> > ---
> >  .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
> >  1 file changed, 39 insertions(+)
> >
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks Rob.

Best regards
Vivek
Robin Murphy Sept. 26, 2018, 3:46 p.m. UTC | #4 
On 30/08/18 15:45, Vivek Gautam wrote:
> Add bindings doc for Qcom's smmu-v2 implementation.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>

> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>   .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 8a6ffce12af5..a6504b37cc21 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -17,10 +17,16 @@ conditions.
>                           "arm,mmu-401"
>                           "arm,mmu-500"
>                           "cavium,smmu-v2"
> +                        "qcom,smmu-v2"
>   
>                     depending on the particular implementation and/or the
>                     version of the architecture implemented.
>   
> +                  Qcom SoCs must contain, as below, SoC-specific compatibles
> +                  along with "qcom,smmu-v2":
> +                  "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
> +                  "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
> +
>   - reg           : Base address and size of the SMMU.
>   
>   - #global-interrupts : The number of global interrupts exposed by the
> @@ -71,6 +77,22 @@ conditions.
>                     or using stream matching with #iommu-cells = <2>, and
>                     may be ignored if present in such cases.
>   
> +- clock-names:    List of the names of clocks input to the device. The
> +                  required list depends on particular implementation and
> +                  is as follows:
> +                  - for "qcom,smmu-v2":
> +                    - "bus": clock required for downstream bus access and
> +                             for the smmu ptw,
> +                    - "iface": clock required to access smmu's registers
> +                               through the TCU's programming interface.
> +                  - unspecified for other implementations.
> +
> +- clocks:         Specifiers for all clocks listed in the clock-names property,
> +                  as per generic clock bindings.
> +
> +- power-domains:  Specifiers for power domains required to be powered on for
> +                  the SMMU to operate, as per generic power domain bindings.
> +
>   ** Deprecated properties:
>   
>   - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> @@ -137,3 +159,20 @@ conditions.
>                   iommu-map = <0 &smmu3 0 0x400>;
>                   ...
>           };
> +
> +	/* Qcom's arm,smmu-v2 implementation */
> +	smmu4: iommu@d00000 {
> +		compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
> +		reg = <0xd00000 0x10000>;
> +
> +		#global-interrupts = <1>;
> +		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +		#iommu-cells = <1>;
> +		power-domains = <&mmcc MDSS_GDSC>;
> +
> +		clocks = <&mmcc SMMU_MDP_AXI_CLK>,
> +			 <&mmcc SMMU_MDP_AHB_CLK>;
> +		clock-names = "bus", "iface";
> +	};
>
Will Deacon Oct. 1, 2018, 12:18 p.m. UTC | #5 
On Thu, Aug 30, 2018 at 08:15:40PM +0530, Vivek Gautam wrote:
> Add bindings doc for Qcom's smmu-v2 implementation.
> 
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)

It would be nice to have an Ack from a DT maintainer on this, since it's
adding new compatible strings...

Will

> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 8a6ffce12af5..a6504b37cc21 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -17,10 +17,16 @@ conditions.
>                          "arm,mmu-401"
>                          "arm,mmu-500"
>                          "cavium,smmu-v2"
> +                        "qcom,smmu-v2"
>  
>                    depending on the particular implementation and/or the
>                    version of the architecture implemented.
>  
> +                  Qcom SoCs must contain, as below, SoC-specific compatibles
> +                  along with "qcom,smmu-v2":
> +                  "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
> +                  "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
> +
>  - reg           : Base address and size of the SMMU.
>  
>  - #global-interrupts : The number of global interrupts exposed by the
> @@ -71,6 +77,22 @@ conditions.
>                    or using stream matching with #iommu-cells = <2>, and
>                    may be ignored if present in such cases.
>  
> +- clock-names:    List of the names of clocks input to the device. The
> +                  required list depends on particular implementation and
> +                  is as follows:
> +                  - for "qcom,smmu-v2":
> +                    - "bus": clock required for downstream bus access and
> +                             for the smmu ptw,
> +                    - "iface": clock required to access smmu's registers
> +                               through the TCU's programming interface.
> +                  - unspecified for other implementations.
> +
> +- clocks:         Specifiers for all clocks listed in the clock-names property,
> +                  as per generic clock bindings.
> +
> +- power-domains:  Specifiers for power domains required to be powered on for
> +                  the SMMU to operate, as per generic power domain bindings.
> +
>  ** Deprecated properties:
>  
>  - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> @@ -137,3 +159,20 @@ conditions.
>                  iommu-map = <0 &smmu3 0 0x400>;
>                  ...
>          };
> +
> +	/* Qcom's arm,smmu-v2 implementation */
> +	smmu4: iommu@d00000 {
> +		compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
> +		reg = <0xd00000 0x10000>;
> +
> +		#global-interrupts = <1>;
> +		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +		#iommu-cells = <1>;
> +		power-domains = <&mmcc MDSS_GDSC>;
> +
> +		clocks = <&mmcc SMMU_MDP_AXI_CLK>,
> +			 <&mmcc SMMU_MDP_AHB_CLK>;
> +		clock-names = "bus", "iface";
> +	};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
Rob Herring Oct. 1, 2018, 5:36 p.m. UTC | #6 
On Mon, Oct 1, 2018 at 7:18 AM Will Deacon <will.deacon@arm.com> wrote:
>
> On Thu, Aug 30, 2018 at 08:15:40PM +0530, Vivek Gautam wrote:
> > Add bindings doc for Qcom's smmu-v2 implementation.
> >
> > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> > Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> > Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> > ---
> >  .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
> >  1 file changed, 39 insertions(+)
>
> It would be nice to have an Ack from a DT maintainer on this, since it's
> adding new compatible strings...

I did...

Rob
Will Deacon Oct. 1, 2018, 5:45 p.m. UTC | #7 
On Mon, Oct 01, 2018 at 12:36:09PM -0500, Rob Herring wrote:
> On Mon, Oct 1, 2018 at 7:18 AM Will Deacon <will.deacon@arm.com> wrote:
> >
> > On Thu, Aug 30, 2018 at 08:15:40PM +0530, Vivek Gautam wrote:
> > > Add bindings doc for Qcom's smmu-v2 implementation.
> > >
> > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> > > Reviewed-by: Tomasz Figa <tfiga@chromium.org>
> > > Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> > > ---
> > >  .../devicetree/bindings/iommu/arm,smmu.txt         | 39 ++++++++++++++++++++++
> > >  1 file changed, 39 insertions(+)
> >
> > It would be nice to have an Ack from a DT maintainer on this, since it's
> > adding new compatible strings...
> 
> I did...

Oops, sorry, missed that.

Will
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index 8a6ffce12af5..a6504b37cc21 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -17,10 +17,16 @@  conditions.
                         "arm,mmu-401"
                         "arm,mmu-500"
                         "cavium,smmu-v2"
+                        "qcom,smmu-v2"
 
                   depending on the particular implementation and/or the
                   version of the architecture implemented.
 
+                  Qcom SoCs must contain, as below, SoC-specific compatibles
+                  along with "qcom,smmu-v2":
+                  "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
+                  "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
+
 - reg           : Base address and size of the SMMU.
 
 - #global-interrupts : The number of global interrupts exposed by the
@@ -71,6 +77,22 @@  conditions.
                   or using stream matching with #iommu-cells = <2>, and
                   may be ignored if present in such cases.
 
+- clock-names:    List of the names of clocks input to the device. The
+                  required list depends on particular implementation and
+                  is as follows:
+                  - for "qcom,smmu-v2":
+                    - "bus": clock required for downstream bus access and
+                             for the smmu ptw,
+                    - "iface": clock required to access smmu's registers
+                               through the TCU's programming interface.
+                  - unspecified for other implementations.
+
+- clocks:         Specifiers for all clocks listed in the clock-names property,
+                  as per generic clock bindings.
+
+- power-domains:  Specifiers for power domains required to be powered on for
+                  the SMMU to operate, as per generic power domain bindings.
+
 ** Deprecated properties:
 
 - mmu-masters (deprecated in favour of the generic "iommus" binding) :
@@ -137,3 +159,20 @@  conditions.
                 iommu-map = <0 &smmu3 0 0x400>;
                 ...
         };
+
+	/* Qcom's arm,smmu-v2 implementation */
+	smmu4: iommu@d00000 {
+		compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+		reg = <0xd00000 0x10000>;
+
+		#global-interrupts = <1>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&mmcc MDSS_GDSC>;
+
+		clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+			 <&mmcc SMMU_MDP_AHB_CLK>;
+		clock-names = "bus", "iface";
+	};