diff mbox series

i8042: enable keyboard wakeups by default when s2idle is used

Message ID 20180904034134.15381-1-drake@endlessm.com (mailing list archive)
State Not Applicable, archived
Headers show
Series i8042: enable keyboard wakeups by default when s2idle is used | expand

Commit Message

Daniel Drake Sept. 4, 2018, 3:41 a.m. UTC
Previously, on typical consumer laptops, pressing a key on the keyboard
when the system is in suspend would cause it to wake up (default or
unconditional behaviour). This happens because the EC generates a SCI
interrupt in this scenario.

That is no longer true on modern laptops based on Intel WhiskyLake,
including Acer Swift SF314-55G, Asus UX333FA, Asus UX433FN and Asus
UX533FD. We confirmed with Asus EC engineers that the "Modern Standby"
design has been modified so that the EC no longer generates a SCI
in this case; the keyboard controller itself should be used for wakeup.

In order to retain the standard behaviour of being able to use the
keyboard to wake up the system, enable serio wakeups by default on
platforms that are using s2idle.

Link: https://lkml.kernel.org/r/CAB4CAwfQ0mPMqCLp95TVjw4J0r5zKPWkSvvkK4cpZUGE--w8bQ@mail.gmail.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
---
 drivers/input/serio/i8042.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

Comments

Rafael J. Wysocki Sept. 10, 2018, 10:15 a.m. UTC | #1
On Tuesday, September 4, 2018 5:41:34 AM CEST Daniel Drake wrote:
> Previously, on typical consumer laptops, pressing a key on the keyboard
> when the system is in suspend would cause it to wake up (default or
> unconditional behaviour). This happens because the EC generates a SCI
> interrupt in this scenario.
> 
> That is no longer true on modern laptops based on Intel WhiskyLake,
> including Acer Swift SF314-55G, Asus UX333FA, Asus UX433FN and Asus
> UX533FD. We confirmed with Asus EC engineers that the "Modern Standby"
> design has been modified so that the EC no longer generates a SCI
> in this case; the keyboard controller itself should be used for wakeup.
> 
> In order to retain the standard behaviour of being able to use the
> keyboard to wake up the system, enable serio wakeups by default on
> platforms that are using s2idle.
> 
> Link: https://lkml.kernel.org/r/CAB4CAwfQ0mPMqCLp95TVjw4J0r5zKPWkSvvkK4cpZUGE--w8bQ@mail.gmail.com
> Signed-off-by: Daniel Drake <drake@endlessm.com>
> ---
>  drivers/input/serio/i8042.c | 31 ++++++++++++++++++++++---------
>  1 file changed, 22 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
> index a8cd9072481c..7229609a9397 100644
> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -1392,15 +1392,28 @@ static void __init i8042_register_ports(void)
>  	for (i = 0; i < I8042_NUM_PORTS; i++) {
>  		struct serio *serio = i8042_ports[i].serio;
>  
> -		if (serio) {
> -			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
> -				serio->name,
> -				(unsigned long) I8042_DATA_REG,
> -				(unsigned long) I8042_COMMAND_REG,
> -				i8042_ports[i].irq);
> -			serio_register_port(serio);
> -			device_set_wakeup_capable(&serio->dev, true);
> -		}
> +		if (!serio)
> +			continue;
> +
> +		printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
> +			serio->name,
> +			(unsigned long) I8042_DATA_REG,
> +			(unsigned long) I8042_COMMAND_REG,
> +			i8042_ports[i].irq);
> +		serio_register_port(serio);
> +		device_set_wakeup_capable(&serio->dev, true);
> +
> +		/*
> +		 * Modern laptops (as of 2018) typically no longer have the
> +		 * behaviour where pressing a key in suspend causes a SCI
> +		 * interrupt which unconditionally wakes up the system.

This behavior was not universally present even before 2018 AFAICS.

> +		 *
> +		 * On platforms that use s2idle, retain the previous keyboard
> +		 * wakeup behaviour by enabling wakeups by default.
> +		 */

So I would say:

"On platforms using suspend-to-idle by default, make the keyboard wake up
the system from seel by enabling keyboard wakeups by default.  That is
consistent with keyboard wakeup behavior on many platforms using
suspend-to-RAM (ACPI S3) by default."

> +		if (mem_sleep_current == PM_SUSPEND_TO_IDLE
> +		    && i == I8042_KBD_PORT_NO)
> +			device_set_wakeup_enable(&serio->dev, true);
>  	}
>  }
>  
> 

Apart from the above it looks OK to me.

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff mbox series

Patch

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index a8cd9072481c..7229609a9397 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1392,15 +1392,28 @@  static void __init i8042_register_ports(void)
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
 		struct serio *serio = i8042_ports[i].serio;
 
-		if (serio) {
-			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
-				serio->name,
-				(unsigned long) I8042_DATA_REG,
-				(unsigned long) I8042_COMMAND_REG,
-				i8042_ports[i].irq);
-			serio_register_port(serio);
-			device_set_wakeup_capable(&serio->dev, true);
-		}
+		if (!serio)
+			continue;
+
+		printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+			serio->name,
+			(unsigned long) I8042_DATA_REG,
+			(unsigned long) I8042_COMMAND_REG,
+			i8042_ports[i].irq);
+		serio_register_port(serio);
+		device_set_wakeup_capable(&serio->dev, true);
+
+		/*
+		 * Modern laptops (as of 2018) typically no longer have the
+		 * behaviour where pressing a key in suspend causes a SCI
+		 * interrupt which unconditionally wakes up the system.
+		 *
+		 * On platforms that use s2idle, retain the previous keyboard
+		 * wakeup behaviour by enabling wakeups by default.
+		 */
+		if (mem_sleep_current == PM_SUSPEND_TO_IDLE
+		    && i == I8042_KBD_PORT_NO)
+			device_set_wakeup_enable(&serio->dev, true);
 	}
 }