| Message ID | 20180917050007.17808-1-andreas@kemnade.info (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [RESEND] twl4030_charger: disable eoc interrupt on linear charge | expand |
Hi, On Mon, Sep 17, 2018 at 07:00:07AM +0200, Andreas Kemnade wrote: > This avoids getting woken up from suspend after power interruptions > when the bci wrongly thinks the battery is full just because > of input current going low because of low input power > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- Thanks, queued. -- Sebastian > drivers/power/supply/twl4030_charger.c | 27 ++++++++++++++++++++++++++- > 1 file changed, 26 insertions(+), 1 deletion(-) > > diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c > index b0eb7d0d6827..ff193368c85b 100644 > --- a/drivers/power/supply/twl4030_charger.c > +++ b/drivers/power/supply/twl4030_charger.c > @@ -440,6 +440,7 @@ static void twl4030_current_worker(struct work_struct *data) > static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) > { > int ret; > + u32 reg; > > if (bci->usb_mode == CHARGE_OFF) > enable = false; > @@ -453,14 +454,38 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) > bci->usb_enabled = 1; > } > > - if (bci->usb_mode == CHARGE_AUTO) > + if (bci->usb_mode == CHARGE_AUTO) { > + /* Enable interrupts now. */ > + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | > + TWL4030_TBATOR2 | TWL4030_TBATOR1 | > + TWL4030_BATSTS); > + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, > + TWL4030_INTERRUPTS_BCIIMR1A); > + if (ret < 0) { > + dev_err(bci->dev, > + "failed to unmask interrupts: %d\n", > + ret); > + return ret; > + } > /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ > ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB); > + } > > /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ > ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0, > TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4); > if (bci->usb_mode == CHARGE_LINEAR) { > + /* Enable interrupts now. */ > + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 | > + TWL4030_TBATOR1 | TWL4030_BATSTS); > + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, > + TWL4030_INTERRUPTS_BCIIMR1A); > + if (ret < 0) { > + dev_err(bci->dev, > + "failed to unmask interrupts: %d\n", > + ret); > + return ret; > + } > twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0); > /* Watch dog key: WOVF acknowledge */ > ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33, > -- > 2.11.0 >
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c index b0eb7d0d6827..ff193368c85b 100644 --- a/drivers/power/supply/twl4030_charger.c +++ b/drivers/power/supply/twl4030_charger.c @@ -440,6 +440,7 @@ static void twl4030_current_worker(struct work_struct *data) static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) { int ret; + u32 reg; if (bci->usb_mode == CHARGE_OFF) enable = false; @@ -453,14 +454,38 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) bci->usb_enabled = 1; } - if (bci->usb_mode == CHARGE_AUTO) + if (bci->usb_mode == CHARGE_AUTO) { + /* Enable interrupts now. */ + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | + TWL4030_TBATOR2 | TWL4030_TBATOR1 | + TWL4030_BATSTS); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR1A); + if (ret < 0) { + dev_err(bci->dev, + "failed to unmask interrupts: %d\n", + ret); + return ret; + } /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB); + } /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0, TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4); if (bci->usb_mode == CHARGE_LINEAR) { + /* Enable interrupts now. */ + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 | + TWL4030_TBATOR1 | TWL4030_BATSTS); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR1A); + if (ret < 0) { + dev_err(bci->dev, + "failed to unmask interrupts: %d\n", + ret); + return ret; + } twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0); /* Watch dog key: WOVF acknowledge */ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
This avoids getting woken up from suspend after power interruptions when the bci wrongly thinks the battery is full just because of input current going low because of low input power Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- drivers/power/supply/twl4030_charger.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)