diff mbox series

[07/11] DT: arm64: exynos7: add support for thermal trip irq-mode

Message ID 20181016145648eucas1p275ad5f845a04e40e5b9d0bbea624f34a~eHqM4Yhz82489624896eucas1p25@eucas1p2.samsung.com (mailing list archive)
State Superseded, archived
Delegated to: Zhang Rui
Headers show
Series thermal: add new flag irq-mode for trip point | expand

Commit Message

Lukasz Luba Oct. 16, 2018, 2:56 p.m. UTC 
This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski Oct. 16, 2018, 3:10 p.m. UTC | #1 
On Tue, 16 Oct 2018 at 16:56, Lukasz Luba <l.luba@partner.samsung.com> wrote:
>
> This patch adds support for new flash which indicates
> that trip point triggers irq when temperature is met.
> Exynos5433 supports 8 trip point which will trigger irq.

Exynos7?

Beside that comments from previous email apply (no need to duplicate them).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
index d3301b8..39185af 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
@@ -11,40 +11,48 @@  trips {
 		temperature = <75000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-1 {
 		temperature = <80000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-2 {
 		temperature = <85000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-3 {
 		temperature = <90000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-4 {
 		temperature = <95000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-5 {
 		temperature = <100000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-alert-6 {
 		temperature = <110000>; /* millicelsius */
 		hysteresis = <10000>; /* millicelsius */
 		type = "passive";
+		irq-mode;
 	};
 	cpu-crit-0 {
 		temperature = <115000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
+		irq-mode;
 	};
 };