diff mbox series

[v4,01/16] PM / devfreq: tegra: Fix kHz to Hz conversion

Message ID 20190501233815.32643-2-digetx@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show
Series NVIDIA Tegra devfreq improvements and Tegra20/30 support | expand

Commit Message

Dmitry Osipenko May 1, 2019, 11:38 p.m. UTC
The kHz to Hz is incorrectly converted in a few places in the code,
this results in a wrong frequency being calculated because devfreq core
uses OPP frequencies that are given in Hz to clamp the rate, while
tegra-devfreq gives to the core value in kHz and then it also expects to
receive value in kHz from the core. In a result memory freq is always set
to a value which is close to ULONG_MAX because of the bug. Hence the EMC
frequency is always capped to the maximum and the driver doesn't do
anything useful. This patch was tested on Tegra30 and Tegra124 SoC's, EMC
frequency scaling works properly now.

Cc: <stable@vger.kernel.org> # 4.14+
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/devfreq/tegra-devfreq.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

Comments

Thierry Reding June 4, 2019, 10:54 a.m. UTC | #1
On Thu, May 02, 2019 at 02:38:00AM +0300, Dmitry Osipenko wrote:
> The kHz to Hz is incorrectly converted in a few places in the code,
> this results in a wrong frequency being calculated because devfreq core
> uses OPP frequencies that are given in Hz to clamp the rate, while
> tegra-devfreq gives to the core value in kHz and then it also expects to
> receive value in kHz from the core. In a result memory freq is always set
> to a value which is close to ULONG_MAX because of the bug. Hence the EMC
> frequency is always capped to the maximum and the driver doesn't do
> anything useful. This patch was tested on Tegra30 and Tegra124 SoC's, EMC
> frequency scaling works properly now.
> 
> Cc: <stable@vger.kernel.org> # 4.14+
> Tested-by: Steev Klimaszewski <steev@kali.org>
> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/devfreq/tegra-devfreq.c | 12 +++++-------
>  1 file changed, 5 insertions(+), 7 deletions(-)

Acked-by: Thierry Reding <treding@nvidia.com>
diff mbox series

Patch

diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
index c89ba7b834ff..43cd1233f87b 100644
--- a/drivers/devfreq/tegra-devfreq.c
+++ b/drivers/devfreq/tegra-devfreq.c
@@ -486,11 +486,11 @@  static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
 {
 	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
 	struct dev_pm_opp *opp;
-	unsigned long rate = *freq * KHZ;
+	unsigned long rate;
 
-	opp = devfreq_recommended_opp(dev, &rate, flags);
+	opp = devfreq_recommended_opp(dev, freq, flags);
 	if (IS_ERR(opp)) {
-		dev_err(dev, "Failed to find opp for %lu KHz\n", *freq);
+		dev_err(dev, "Failed to find opp for %lu Hz\n", *freq);
 		return PTR_ERR(opp);
 	}
 	rate = dev_pm_opp_get_freq(opp);
@@ -499,8 +499,6 @@  static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
 	clk_set_min_rate(tegra->emc_clock, rate);
 	clk_set_rate(tegra->emc_clock, 0);
 
-	*freq = rate;
-
 	return 0;
 }
 
@@ -510,7 +508,7 @@  static int tegra_devfreq_get_dev_status(struct device *dev,
 	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
 	struct tegra_devfreq_device *actmon_dev;
 
-	stat->current_frequency = tegra->cur_freq;
+	stat->current_frequency = tegra->cur_freq * KHZ;
 
 	/* To be used by the tegra governor */
 	stat->private_data = tegra;
@@ -565,7 +563,7 @@  static int tegra_governor_get_target(struct devfreq *devfreq,
 		target_freq = max(target_freq, dev->target_freq);
 	}
 
-	*freq = target_freq;
+	*freq = target_freq * KHZ;
 
 	return 0;
 }