diff mbox series

[v4,10/11] dt-bindings: thermal: add binding document for h3 thermal controller

Message ID 20190623164206.7467-11-tiny.windzz@gmail.com (mailing list archive)
State Superseded, archived
Delegated to: Eduardo Valentin
Headers show
Series add thermal driver for h6 | expand

Commit Message

Yangtao Li June 23, 2019, 4:42 p.m. UTC
This patch adds binding document for allwinner h3 thermal controller.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../bindings/thermal/sun8i-thermal.yaml       | 29 +++++++++++++++++--
 1 file changed, 26 insertions(+), 3 deletions(-)

Comments

Maxime Ripard June 24, 2019, 8:50 a.m. UTC | #1
On Sun, Jun 23, 2019 at 12:42:05PM -0400, Yangtao Li wrote:
> This patch adds binding document for allwinner h3 thermal controller.
>
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> ---
>  .../bindings/thermal/sun8i-thermal.yaml       | 29 +++++++++++++++++--
>  1 file changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> index 2c5acc61ed03..1eaf68b5dd5a 100644
> --- a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> @@ -16,6 +16,7 @@ description: |-
>  properties:
>    compatible:
>      enum:
> +      - allwinner,sun8i-h3-ths
>        - allwinner,sun50i-h6-ths
>
>    reg:
> @@ -29,13 +30,22 @@ properties:
>
>    clocks:
>      minItems: 1
> -    maxItems: 1
> +    maxItems: 2
>
>    clock-names:
> -    const: bus
> +    items:
> +      - const: bus
> +      - const: ahb

You need a min/maxItems here as well. Otherwise, on the H6, you will
have a warning since you asked for an array of two items, bus and ahb,
while you only have a single one.

>    '#thermal-sensor-cells':
> -    const: 1
> +    enum: [ 0, 1 ]
> +    description: |
> +      Definition depends on soc version:
> +
> +      For "allwinner,sun8i-h3-ths",
> +      value must be 0.
> +      For "allwinner,sun50i-h6-ths",
> +      value must be 1.

This must be checked using a conditional.

Something like:

if:
  properties:
    compatible:
      const: allwinner,sun8i-h3-ths

then:
  properties:
    "#thermal-sensor-cells":
      const: 0

else:
  properties:
    "#thermal-sensor-cells":
      const: 1

>    nvmem-cells:
>      items:
> @@ -55,6 +65,19 @@ required:
>    - '#thermal-sensor-cells'
>
>  examples:
> +  - |
> +    ths: ths@1c25000 {
> +         compatible = "allwinner,sun8i-h3-ths";
> +         reg = <0x01c25000 0x400>;
> +         clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> +         clock-names = "bus", "ahb";
> +         resets = <&ccu RST_BUS_THS>;
> +         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +         nvmem-cells = <&tsen_calib>;
> +         nvmem-cell-names = "calib";
> +         #thermal-sensor-cells = <0>;
> +    };

Same remark here, it won't compile

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
index 2c5acc61ed03..1eaf68b5dd5a 100644
--- a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
@@ -16,6 +16,7 @@  description: |-
 properties:
   compatible:
     enum:
+      - allwinner,sun8i-h3-ths
       - allwinner,sun50i-h6-ths
 
   reg:
@@ -29,13 +30,22 @@  properties:
 
   clocks:
     minItems: 1
-    maxItems: 1
+    maxItems: 2
 
   clock-names:
-    const: bus
+    items:
+      - const: bus
+      - const: ahb
 
   '#thermal-sensor-cells':
-    const: 1
+    enum: [ 0, 1 ]
+    description: |
+      Definition depends on soc version:
+
+      For "allwinner,sun8i-h3-ths",
+      value must be 0.
+      For "allwinner,sun50i-h6-ths",
+      value must be 1.
 
   nvmem-cells:
     items:
@@ -55,6 +65,19 @@  required:
   - '#thermal-sensor-cells'
 
 examples:
+  - |
+    ths: ths@1c25000 {
+         compatible = "allwinner,sun8i-h3-ths";
+         reg = <0x01c25000 0x400>;
+         clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+         clock-names = "bus", "ahb";
+         resets = <&ccu RST_BUS_THS>;
+         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+         nvmem-cells = <&tsen_calib>;
+         nvmem-cell-names = "calib";
+         #thermal-sensor-cells = <0>;
+    };
+
   - |
     ths: ths@5070400 {
          compatible = "allwinner,sun50i-h6-ths";