diff mbox series

[v2,07/11] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema

Message ID 20190907092007.9946-7-krzk@kernel.org (mailing list archive)
State Not Applicable, archived
Headers show
Series [v2,01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema | expand

Commit Message

Krzysztof Kozlowski Sept. 7, 2019, 9:20 a.m. UTC
Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema
format using json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Fix clock-names to match all elements against schema (any number of
   any clkoutN values).
   This currently fails:
       properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2',
       'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8',
       'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14',
       'clkout15', 'clkout16']} is not of type 'array

2. Add syscon reboot and poweroff nodes.
---
 .../devicetree/bindings/arm/samsung/pmu.txt   |  72 -----------
 .../devicetree/bindings/arm/samsung/pmu.yaml  | 117 ++++++++++++++++++
 2 files changed, 117 insertions(+), 72 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
 create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml

Comments

Rob Herring (Arm) Sept. 18, 2019, 12:43 p.m. UTC | #1
On Sat, Sep 07, 2019 at 11:20:03AM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema
> format using json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v1:
> 1. Fix clock-names to match all elements against schema (any number of
>    any clkoutN values).
>    This currently fails:
>        properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2',
>        'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8',
>        'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14',
>        'clkout15', 'clkout16']} is not of type 'array
> 
> 2. Add syscon reboot and poweroff nodes.
> ---
>  .../devicetree/bindings/arm/samsung/pmu.txt   |  72 -----------
>  .../devicetree/bindings/arm/samsung/pmu.yaml  | 117 ++++++++++++++++++
>  2 files changed, 117 insertions(+), 72 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
>  create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> deleted file mode 100644
> index 433bfd7593ac..000000000000
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> +++ /dev/null
> @@ -1,72 +0,0 @@
> -SAMSUNG Exynos SoC series PMU Registers
> -
> -Properties:
> - - compatible : should contain two values. First value must be one from following list:
> -		   - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
> -		   - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
> -		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
> -		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
> -		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
> -		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
> -		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
> -		   - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
> -		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
> -		second value must be always "syscon".
> -
> - - reg : offset and length of the register set.
> -
> - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
> -		The single specifier cell is used as index to list of clocks
> -		provided by PMU, which is currently:
> -			0 : SoC clock output (CLKOUT pin)
> -
> - - clock-names : list of clock names for particular CLKOUT mux inputs in
> -		following format:
> -			"clkoutN", where N is a decimal number corresponding to
> -			CLKOUT mux control bits value for given input, e.g.
> -				"clkout0", "clkout7", "clkout15".
> -
> - - clocks : list of phandles and specifiers to all input clocks listed in
> -		clock-names property.
> -
> -Optional properties:
> -
> -Some PMUs are capable of behaving as an interrupt controller (mostly
> -to wake up a suspended PMU). In which case, they can have the
> -following properties:
> -
> -- interrupt-controller: indicate that said PMU is an interrupt controller
> -
> -- #interrupt-cells: must be identical to the that of the parent interrupt
> -  controller.
> -
> -
> -Optional nodes:
> -
> -- nodes defining the restart and poweroff syscon children
> -
> -
> -Example :
> -pmu_system_controller: system-controller@10040000 {
> -	compatible = "samsung,exynos5250-pmu", "syscon";
> -	reg = <0x10040000 0x5000>;
> -	interrupt-controller;
> -	#interrupt-cells = <3>;
> -	interrupt-parent = <&gic>;
> -	#clock-cells = <1>;
> -	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> -			"clkout4", "clkout8", "clkout9";
> -	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> -		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> -		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
> -		<&clock CLK_XUSBXTI>;
> -};
> -
> -Example of clock consumer :
> -
> -usb3503: usb3503@8 {
> -	/* ... */
> -	clock-names = "refclk";
> -	clocks = <&pmu_system_controller 0>;
> -	/* ... */
> -};
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> new file mode 100644
> index 000000000000..a5a02f8237fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC series Power Management Unit (PMU)
> +
> +maintainers:
> +  - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - samsung,exynos3250-pmu
> +          - samsung,exynos4210-pmu
> +          - samsung,exynos4412-pmu
> +          - samsung,exynos5250-pmu
> +          - samsung,exynos5260-pmu
> +          - samsung,exynos5410-pmu
> +          - samsung,exynos5420-pmu
> +          - samsung,exynos5433-pmu
> +          - samsung,exynos7-pmu
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  clock-names:
> +    description:
> +      List of clock names for particular CLKOUT mux inputs
> +    minItems: 1
> +    maxItems: 32
> +    items:
> +      enum:
> +        - clkout0
> +        - clkout1

Looking at this again, instead of enum, we can just do:

pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'

> +        - clkout2
> +        - clkout3
> +        - clkout4
> +        - clkout5
> +        - clkout6
> +        - clkout7
> +        - clkout8
> +        - clkout9
> +        - clkout10
> +        - clkout11
> +        - clkout12
> +        - clkout13
> +        - clkout14
> +        - clkout15
> +        - clkout16
> +        - clkout17
> +        - clkout18
> +        - clkout19
> +        - clkout20
> +        - clkout21
> +        - clkout22
> +        - clkout23
> +        - clkout24
> +        - clkout25
> +        - clkout26
> +        - clkout27
> +        - clkout28
> +        - clkout29
> +        - clkout30
> +        - clkout31
Krzysztof Kozlowski Sept. 18, 2019, 1:17 p.m. UTC | #2
On Wed, Sep 18, 2019 at 07:43:06AM -0500, Rob Herring wrote:
> On Sat, Sep 07, 2019 at 11:20:03AM +0200, Krzysztof Kozlowski wrote:
> > Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema
> > format using json-schema.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > 
> > ---
> > 
> > Changes since v1:
> > 1. Fix clock-names to match all elements against schema (any number of
> >    any clkoutN values).
> >    This currently fails:
> >        properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2',
> >        'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8',
> >        'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14',
> >        'clkout15', 'clkout16']} is not of type 'array
> > 
> > 2. Add syscon reboot and poweroff nodes.
> > ---
> >  .../devicetree/bindings/arm/samsung/pmu.txt   |  72 -----------
> >  .../devicetree/bindings/arm/samsung/pmu.yaml  | 117 ++++++++++++++++++
> >  2 files changed, 117 insertions(+), 72 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
> >  create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> > deleted file mode 100644
> > index 433bfd7593ac..000000000000
> > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> > +++ /dev/null
> > @@ -1,72 +0,0 @@
> > -SAMSUNG Exynos SoC series PMU Registers
> > -
> > -Properties:
> > - - compatible : should contain two values. First value must be one from following list:
> > -		   - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
> > -		   - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
> > -		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
> > -		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
> > -		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
> > -		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
> > -		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
> > -		   - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
> > -		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
> > -		second value must be always "syscon".
> > -
> > - - reg : offset and length of the register set.
> > -
> > - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
> > -		The single specifier cell is used as index to list of clocks
> > -		provided by PMU, which is currently:
> > -			0 : SoC clock output (CLKOUT pin)
> > -
> > - - clock-names : list of clock names for particular CLKOUT mux inputs in
> > -		following format:
> > -			"clkoutN", where N is a decimal number corresponding to
> > -			CLKOUT mux control bits value for given input, e.g.
> > -				"clkout0", "clkout7", "clkout15".
> > -
> > - - clocks : list of phandles and specifiers to all input clocks listed in
> > -		clock-names property.
> > -
> > -Optional properties:
> > -
> > -Some PMUs are capable of behaving as an interrupt controller (mostly
> > -to wake up a suspended PMU). In which case, they can have the
> > -following properties:
> > -
> > -- interrupt-controller: indicate that said PMU is an interrupt controller
> > -
> > -- #interrupt-cells: must be identical to the that of the parent interrupt
> > -  controller.
> > -
> > -
> > -Optional nodes:
> > -
> > -- nodes defining the restart and poweroff syscon children
> > -
> > -
> > -Example :
> > -pmu_system_controller: system-controller@10040000 {
> > -	compatible = "samsung,exynos5250-pmu", "syscon";
> > -	reg = <0x10040000 0x5000>;
> > -	interrupt-controller;
> > -	#interrupt-cells = <3>;
> > -	interrupt-parent = <&gic>;
> > -	#clock-cells = <1>;
> > -	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> > -			"clkout4", "clkout8", "clkout9";
> > -	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> > -		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> > -		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
> > -		<&clock CLK_XUSBXTI>;
> > -};
> > -
> > -Example of clock consumer :
> > -
> > -usb3503: usb3503@8 {
> > -	/* ... */
> > -	clock-names = "refclk";
> > -	clocks = <&pmu_system_controller 0>;
> > -	/* ... */
> > -};
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > new file mode 100644
> > index 000000000000..a5a02f8237fb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > @@ -0,0 +1,117 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Samsung Exynos SoC series Power Management Unit (PMU)
> > +
> > +maintainers:
> > +  - Krzysztof Kozlowski <krzk@kernel.org>
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - samsung,exynos3250-pmu
> > +          - samsung,exynos4210-pmu
> > +          - samsung,exynos4412-pmu
> > +          - samsung,exynos5250-pmu
> > +          - samsung,exynos5260-pmu
> > +          - samsung,exynos5410-pmu
> > +          - samsung,exynos5420-pmu
> > +          - samsung,exynos5433-pmu
> > +          - samsung,exynos7-pmu
> > +      - const: syscon
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +  clock-names:
> > +    description:
> > +      List of clock names for particular CLKOUT mux inputs
> > +    minItems: 1
> > +    maxItems: 32
> > +    items:
> > +      enum:
> > +        - clkout0
> > +        - clkout1
> 
> Looking at this again, instead of enum, we can just do:
> 
> pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'

Indeed looks better.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
deleted file mode 100644
index 433bfd7593ac..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ /dev/null
@@ -1,72 +0,0 @@ 
-SAMSUNG Exynos SoC series PMU Registers
-
-Properties:
- - compatible : should contain two values. First value must be one from following list:
-		   - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
-		   - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
-		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
-		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
-		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
-		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
-		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
-		   - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
-		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
-		second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
- - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
-		The single specifier cell is used as index to list of clocks
-		provided by PMU, which is currently:
-			0 : SoC clock output (CLKOUT pin)
-
- - clock-names : list of clock names for particular CLKOUT mux inputs in
-		following format:
-			"clkoutN", where N is a decimal number corresponding to
-			CLKOUT mux control bits value for given input, e.g.
-				"clkout0", "clkout7", "clkout15".
-
- - clocks : list of phandles and specifiers to all input clocks listed in
-		clock-names property.
-
-Optional properties:
-
-Some PMUs are capable of behaving as an interrupt controller (mostly
-to wake up a suspended PMU). In which case, they can have the
-following properties:
-
-- interrupt-controller: indicate that said PMU is an interrupt controller
-
-- #interrupt-cells: must be identical to the that of the parent interrupt
-  controller.
-
-
-Optional nodes:
-
-- nodes defining the restart and poweroff syscon children
-
-
-Example :
-pmu_system_controller: system-controller@10040000 {
-	compatible = "samsung,exynos5250-pmu", "syscon";
-	reg = <0x10040000 0x5000>;
-	interrupt-controller;
-	#interrupt-cells = <3>;
-	interrupt-parent = <&gic>;
-	#clock-cells = <1>;
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-		<&clock CLK_XUSBXTI>;
-};
-
-Example of clock consumer :
-
-usb3503: usb3503@8 {
-	/* ... */
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	/* ... */
-};
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
new file mode 100644
index 000000000000..a5a02f8237fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -0,0 +1,117 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Power Management Unit (PMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,exynos3250-pmu
+          - samsung,exynos4210-pmu
+          - samsung,exynos4412-pmu
+          - samsung,exynos5250-pmu
+          - samsung,exynos5260-pmu
+          - samsung,exynos5410-pmu
+          - samsung,exynos5420-pmu
+          - samsung,exynos5433-pmu
+          - samsung,exynos7-pmu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    description:
+      List of clock names for particular CLKOUT mux inputs
+    minItems: 1
+    maxItems: 32
+    items:
+      enum:
+        - clkout0
+        - clkout1
+        - clkout2
+        - clkout3
+        - clkout4
+        - clkout5
+        - clkout6
+        - clkout7
+        - clkout8
+        - clkout9
+        - clkout10
+        - clkout11
+        - clkout12
+        - clkout13
+        - clkout14
+        - clkout15
+        - clkout16
+        - clkout17
+        - clkout18
+        - clkout19
+        - clkout20
+        - clkout21
+        - clkout22
+        - clkout23
+        - clkout24
+        - clkout25
+        - clkout26
+        - clkout27
+        - clkout28
+        - clkout29
+        - clkout30
+        - clkout31
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller:
+    description:
+      Some PMUs are capable of behaving as an interrupt controller (mostly
+      to wake up a suspended PMU).
+
+  '#interrupt-cells':
+    description:
+      Must be identical to the that of the parent interrupt controller.
+    const: 3
+
+  syscon-poweroff:
+    $ref: "../../power/reset/syscon-poweroff.yaml#"
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: "../../power/reset/syscon-reboot.yaml#"
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clock-names
+  - clocks
+
+examples:
+  - |
+    pmu_system_controller: system-controller@10040000 {
+      compatible = "samsung,exynos5250-pmu", "syscon";
+      reg = <0x10040000 0x5000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      interrupt-parent = <&gic>;
+      #clock-cells = <1>;
+      clock-names = "clkout16";
+      clocks = <&clock 0>; // CLK_FIN_PLL
+    };