diff mbox series

[v3,1/4] dt-bindings: thermal: k3: Add VTM bindings documentation

Message ID 20200219074314.22829-2-j-keerthy@ti.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series thermal: k3: Add support for bandgap sensors | expand

Commit Message

J, KEERTHY Feb. 19, 2020, 7:43 a.m. UTC
Add VTM bindings documentation. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---

Changes in v3:

  * Fixed errors seen with:
    dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml

 .../bindings/thermal/ti,am654-thermal.yaml    | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml

Comments

Rob Herring Feb. 19, 2020, 2:52 p.m. UTC | #1
On Wed, Feb 19, 2020 at 01:13:11PM +0530, Keerthy wrote:
> Add VTM bindings documentation. In the Voltage Thermal
> Management Module(VTM), K3 AM654 supplies a voltage
> reference and a temperature sensor feature that are gathered in the band
> gap voltage and temperature sensor (VBGAPTS) module. The band
> gap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> 
> Changes in v3:
> 
>   * Fixed errors seen with:
>     dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> 
>  .../bindings/thermal/ti,am654-thermal.yaml    | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> new file mode 100644
> index 000000000000..b6dc95c3acab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments AM654 VTM (DTS) binding
> +
> +maintainers:
> +  - Keerthy <j-keerthy@ti.com>
> +
> +properties:
> +  compatible:
> +    const: ti,am654-vtm
> +
> +  reg:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +    description: phandle to the associated power domain

No need to redefine a standard property description.

> +
> +  "#thermal-sensor-cells":
> +    const: 1
> +
> +required:
> +  - "#thermal-sensor-cells"
> +  - compatible
> +  - reg
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    vtm: wkup_vtm0@42050000 {

thermal-sensor@...

Use generic node names and don't use '_' in node names.

> +        compatible = "ti,am654-vtm";
> +        reg = <0x0 0x42050000 0x0 0x25c>;
> +        power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
> +        #thermal-sensor-cells = <1>;
> +    };
> +
> +    mpu0_thermal: mpu0_thermal {
> +        polling-delay-passive = <250>; /* milliseconds */
> +        polling-delay = <500>; /* milliseconds */
> +        thermal-sensors = <&vtm0 0>;
> +
> +        trips {
> +                mpu0_crit: mpu0_crit {
> +                        temperature = <125000>; /* milliCelsius */
> +                        hysteresis = <2000>; /* milliCelsius */
> +                        type = "critical";
> +                };
> +        };
> +    };
> +...
> -- 
> 2.17.1
>
J, KEERTHY Feb. 20, 2020, 4:12 a.m. UTC | #2
On 19/02/20 8:22 pm, Rob Herring wrote:
> On Wed, Feb 19, 2020 at 01:13:11PM +0530, Keerthy wrote:
>> Add VTM bindings documentation. In the Voltage Thermal
>> Management Module(VTM), K3 AM654 supplies a voltage
>> reference and a temperature sensor feature that are gathered in the band
>> gap voltage and temperature sensor (VBGAPTS) module. The band
>> gap provides current and voltage reference for its internal
>> circuits and other analog IP blocks. The analog-to-digital
>> converter (ADC) produces an output value that is proportional
>> to the silicon temperature.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v3:
>>
>>    * Fixed errors seen with:
>>      dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>>
>>   .../bindings/thermal/ti,am654-thermal.yaml    | 57 +++++++++++++++++++
>>   1 file changed, 57 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>> new file mode 100644
>> index 000000000000..b6dc95c3acab
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>> @@ -0,0 +1,57 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments AM654 VTM (DTS) binding
>> +
>> +maintainers:
>> +  - Keerthy <j-keerthy@ti.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: ti,am654-vtm
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +    description: phandle to the associated power domain
> 
> No need to redefine a standard property description.

Okay.

> 
>> +
>> +  "#thermal-sensor-cells":
>> +    const: 1
>> +
>> +required:
>> +  - "#thermal-sensor-cells"
>> +  - compatible
>> +  - reg
>> +  - power-domains
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
>> +    vtm: wkup_vtm0@42050000 {
> 
> thermal-sensor@...
> 
> Use generic node names and don't use '_' in node names

vtm stands for voltage thermal manager and comprises of multiple 
sensors. This is similar to omap bandgap. Should i replace vtm with more 
generic name like thermal? as used in:

Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml

- Keerthy

> 
>> +        compatible = "ti,am654-vtm";
>> +        reg = <0x0 0x42050000 0x0 0x25c>;
>> +        power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
>> +        #thermal-sensor-cells = <1>;
>> +    };
>> +
>> +    mpu0_thermal: mpu0_thermal {
>> +        polling-delay-passive = <250>; /* milliseconds */
>> +        polling-delay = <500>; /* milliseconds */
>> +        thermal-sensors = <&vtm0 0>;
>> +
>> +        trips {
>> +                mpu0_crit: mpu0_crit {
>> +                        temperature = <125000>; /* milliCelsius */
>> +                        hysteresis = <2000>; /* milliCelsius */
>> +                        type = "critical";
>> +                };
>> +        };
>> +    };
>> +...
>> -- 
>> 2.17.1
>>
Rob Herring Feb. 20, 2020, 7:40 p.m. UTC | #3
On Wed, Feb 19, 2020 at 10:13 PM Keerthy <j-keerthy@ti.com> wrote:
>
>
>
> On 19/02/20 8:22 pm, Rob Herring wrote:
> > On Wed, Feb 19, 2020 at 01:13:11PM +0530, Keerthy wrote:
> >> Add VTM bindings documentation. In the Voltage Thermal
> >> Management Module(VTM), K3 AM654 supplies a voltage
> >> reference and a temperature sensor feature that are gathered in the band
> >> gap voltage and temperature sensor (VBGAPTS) module. The band
> >> gap provides current and voltage reference for its internal
> >> circuits and other analog IP blocks. The analog-to-digital
> >> converter (ADC) produces an output value that is proportional
> >> to the silicon temperature.
> >>
> >> Signed-off-by: Keerthy <j-keerthy@ti.com>
> >> ---
> >>
> >> Changes in v3:
> >>
> >>    * Fixed errors seen with:
> >>      dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> >>
> >>   .../bindings/thermal/ti,am654-thermal.yaml    | 57 +++++++++++++++++++
> >>   1 file changed, 57 insertions(+)
> >>   create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> >> new file mode 100644
> >> index 000000000000..b6dc95c3acab
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
> >> @@ -0,0 +1,57 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Texas Instruments AM654 VTM (DTS) binding
> >> +
> >> +maintainers:
> >> +  - Keerthy <j-keerthy@ti.com>
> >> +
> >> +properties:
> >> +  compatible:
> >> +    const: ti,am654-vtm
> >> +
> >> +  reg:
> >> +    maxItems: 1
> >> +
> >> +  power-domains:
> >> +    maxItems: 1
> >> +    description: phandle to the associated power domain
> >
> > No need to redefine a standard property description.
>
> Okay.
>
> >
> >> +
> >> +  "#thermal-sensor-cells":
> >> +    const: 1
> >> +
> >> +required:
> >> +  - "#thermal-sensor-cells"
> >> +  - compatible
> >> +  - reg
> >> +  - power-domains
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> +  - |
> >> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> >> +    vtm: wkup_vtm0@42050000 {
> >
> > thermal-sensor@...
> >
> > Use generic node names and don't use '_' in node names
>
> vtm stands for voltage thermal manager and comprises of multiple
> sensors. This is similar to omap bandgap. Should i replace vtm with more
> generic name like thermal? as used in:

'vtm' is a label and source construct only (until you do overlays), so
I don't care what you put really.

Rob
J, KEERTHY Feb. 24, 2020, 1:14 a.m. UTC | #4
On 2/21/2020 1:10 AM, Rob Herring wrote:
> On Wed, Feb 19, 2020 at 10:13 PM Keerthy <j-keerthy@ti.com> wrote:
>>
>>
>>
>> On 19/02/20 8:22 pm, Rob Herring wrote:
>>> On Wed, Feb 19, 2020 at 01:13:11PM +0530, Keerthy wrote:
>>>> Add VTM bindings documentation. In the Voltage Thermal
>>>> Management Module(VTM), K3 AM654 supplies a voltage
>>>> reference and a temperature sensor feature that are gathered in the band
>>>> gap voltage and temperature sensor (VBGAPTS) module. The band
>>>> gap provides current and voltage reference for its internal
>>>> circuits and other analog IP blocks. The analog-to-digital
>>>> converter (ADC) produces an output value that is proportional
>>>> to the silicon temperature.
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>>> ---
>>>>
>>>> Changes in v3:
>>>>
>>>>     * Fixed errors seen with:
>>>>       dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>>>>
>>>>    .../bindings/thermal/ti,am654-thermal.yaml    | 57 +++++++++++++++++++
>>>>    1 file changed, 57 insertions(+)
>>>>    create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>>>> new file mode 100644
>>>> index 000000000000..b6dc95c3acab
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
>>>> @@ -0,0 +1,57 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Texas Instruments AM654 VTM (DTS) binding
>>>> +
>>>> +maintainers:
>>>> +  - Keerthy <j-keerthy@ti.com>
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    const: ti,am654-vtm
>>>> +
>>>> +  reg:
>>>> +    maxItems: 1
>>>> +
>>>> +  power-domains:
>>>> +    maxItems: 1
>>>> +    description: phandle to the associated power domain
>>>
>>> No need to redefine a standard property description.
>>
>> Okay.
>>
>>>
>>>> +
>>>> +  "#thermal-sensor-cells":
>>>> +    const: 1
>>>> +
>>>> +required:
>>>> +  - "#thermal-sensor-cells"
>>>> +  - compatible
>>>> +  - reg
>>>> +  - power-domains
>>>> +
>>>> +additionalProperties: false
>>>> +
>>>> +examples:
>>>> +  - |
>>>> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
>>>> +    vtm: wkup_vtm0@42050000 {
>>>
>>> thermal-sensor@...
>>>
>>> Use generic node names and don't use '_' in node names
>>
>> vtm stands for voltage thermal manager and comprises of multiple
>> sensors. This is similar to omap bandgap. Should i replace vtm with more
>> generic name like thermal? as used in:
> 
> 'vtm' is a label and source construct only (until you do overlays), so
> I don't care what you put really.

Okay.

I will change in to:

vtm: thermal@42050000 {

Regards,
Keerthy

> 
> Rob
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
new file mode 100644
index 000000000000..b6dc95c3acab
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -0,0 +1,57 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM654 VTM (DTS) binding
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,am654-vtm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    vtm: wkup_vtm0@42050000 {
+        compatible = "ti,am654-vtm";
+        reg = <0x0 0x42050000 0x0 0x25c>;
+        power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu0_thermal: mpu0_thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&vtm0 0>;
+
+        trips {
+                mpu0_crit: mpu0_crit {
+                        temperature = <125000>; /* milliCelsius */
+                        hysteresis = <2000>; /* milliCelsius */
+                        type = "critical";
+                };
+        };
+    };
+...