@@ -31,6 +31,7 @@
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
+ dynamic-power-coefficient = <90>;
};
cpu1: cpu@101 {
@@ -43,6 +44,7 @@
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
+ dynamic-power-coefficient = <90>;
};
cpu2: cpu@102 {
@@ -55,6 +57,7 @@
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
+ dynamic-power-coefficient = <90>;
};
cpu3: cpu@103 {
@@ -67,6 +70,7 @@
operating-points-v2 = <&cluster_a7_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
+ dynamic-power-coefficient = <90>;
};
cpu4: cpu@0 {
@@ -79,6 +83,7 @@
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <310>;
};
cpu5: cpu@1 {
@@ -91,6 +96,7 @@
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <310>;
};
cpu6: cpu@2 {
@@ -103,6 +109,7 @@
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <310>;
};
cpu7: cpu@3 {
@@ -115,6 +122,7 @@
operating-points-v2 = <&cluster_a15_opp_table>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <310>;
};
};
};
To use Energy Aware Scheduler (EAS) the Energy Model (EM) should be registered for CPUs. Add dynamic-power-coefficient into CPU nodes which let CPUFreq subsystem register the EM structures. This will increase energy efficiency of big.LITTLE platforms. The 'dynamic-power-coefficient' values have been obtained experimenting with different workloads. The power measurements taken from big CPU Cluster and LITTLE CPU Cluster has been compared with official documents and synthetic workloads estimations. The effective power ratio between Cortex-A7 and Cortex-A15 CPUs (~3x) is also aligned with documentation. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> --- arch/arm/boot/dts/exynos5422-cpus.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)