new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+ - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+ The driver can utilize information from a simple-battery linked via a
+ phandle in monitored-battery. If specified the driver uses the
+ charge-full-design-microamp-hours property of the battery.
+
+properties:
+ compatible:
+ const: cellwise,cw2015
+
+ reg:
+ items:
+ - description: i2c address
+
+ cellwise,battery-profile:
+ description: |
+ This property specifies characteristics of the battery used. The format
+ of this binary blob is kept secret by CellWise. The only way to obtain
+ it is to mail two batteries to a test facility of CellWise and receive
+ back a test report with the binary blob.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ items:
+ - minItems: 64
+ maxItems: 64
+
+ cellwise,monitor-interval-ms:
+ description:
+ Specifies the interval in milliseconds gauge values are polled at
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ power-supplies:
+ description:
+ Specifies supplies used for charging the battery connected to this gauge
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle-array
+ - minItems: 1
+ maxItems: 8 # Should be enough
+
+ monitored-battery:
+ description:
+ Specifies the phandle of a simple-battery connected to this gauge
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cw2015@62 {
+ compatible = "cellwise,cw201x";
+ reg = <0x62>;
+ cellwise,battery-profile = /bits/ 8 <
+ 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+ 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+ 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+ 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+ 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+ 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+ 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+ >;
+ cellwise,monitor-interval-ms = <5000>;
+ monitored-battery = <&bat>;
+ power-supplies = <&mains_charger>, <&usb_charger>;
+ };
+ };
+
This patch adds the dts binding schema for the cw2015 fuel gauge. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- .../bindings/power/supply/cw2015_battery.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml